[SLOF] [PATCH 1/2] Move archsupport.fs into board-qemu directory

[Thomas Huth]

On 04.01.2016 10:17, Thomas Huth wrote:
> On 23.12.2015 02:43, Alexey Kardashevskiy wrote:
>> On 12/22/2015 07:25 AM, Thomas Huth wrote:
>>> The "hv-cas" hypercall is only available on board-qemu.
>>> Including archsupport.fs on board-js2x breaks the boot
>>> process there. Thus the archsupport.fs file should
>>> reside in the board-qemu/slof directory instead and
>>> only be included from there.
>>
>>
>> Thanks, applied.
>>
>> Does js2x boot now? :)
> 
> Unfortunately not yet, there are a couple of problems left:
> 
> - dma-alloc & dma-map-in and friends do not work yet, causing the
>   libusb code to abort when trying to allocate memory
>   => I have a patch for this pretty much ready, will send it later
> 
> - But even with the dma-alloc fixed, the new libusb code does not seem
>   to work right with real hardware yet, I get messages about STALLs and
>   timeouts when I connect an USB device

FWIW, here's the console output of the USB scan:

Scanning USB
  OHCI: initializing
  OHCI: initializing
  EHCI: Initializing
  OHCI: initializing
    USB Storage
       SCSI: Looking for devices
USB: Error STALL 0xE967000
ED Halted
ohci_transfer_bulk: headp 0E967011 tailp 0E967010 next_td 00000000 attr
00405101
Timed out waiting for interrupt 45
Timed out waiting for interrupt 45
USB-DISK: Bulk commad failed!
          101000000000000 DISK     : "Ut163    USB2FlashStorage 0.00"
  OHCI: initializing
ohci_send_ctrl: timed out - failed
Request: 80 06 00 01 00 00 08 00
USB: Error DEVICENOTRESPONDING 0xE96ED00
Timed out waiting for interrupt 45
usb-ohci: unable to setup device on port 1

Any ideas what could cause these issues?

 Thomas