[Skiboot] [PATCH 2/9] npu2: Fix indirect SCOM addresses

[Andrew Donnellan]

On 15/07/17 01:39, Reza Arbab wrote:
> Change these values for POWER9 DD2, but keep backwards compatibility.
>
> Cc: Alistair Popple <alistair at popple.id.au>
> Signed-off-by: Reza Arbab <arbab at linux.vnet.ibm.com>

Reviewed-by: Andrew Donnellan <andrew.donnellan at au1.ibm.com>

> ---
>  hw/npu2.c           | 10 ++++++++--
>  include/npu2-regs.h |  6 ++++--
>  2 files changed, 12 insertions(+), 4 deletions(-)
>
> diff --git a/hw/npu2.c b/hw/npu2.c
> index a986652..2ec572d 100644
> --- a/hw/npu2.c
> +++ b/hw/npu2.c
> @@ -75,17 +75,23 @@ static bool is_p9dd1(void)
>  static void npu2_scom_set_addr(uint64_t gcid, uint64_t scom_base,
>  			       uint64_t addr, uint64_t size)
>  {
> +	uint64_t isa = is_p9dd1() ? NPU2_DD1_MISC_SCOM_IND_SCOM_ADDR :
> +				    NPU2_MISC_SCOM_IND_SCOM_ADDR;
> +
>  	addr = SETFIELD(NPU2_MISC_DA_ADDR, 0ull, addr);
>  	addr = SETFIELD(NPU2_MISC_DA_LEN, addr, size);
> -	xscom_write(gcid, scom_base + NPU2_MISC_SCOM_IND_SCOM_ADDR, addr);
> +	xscom_write(gcid, scom_base + isa, addr);
>  }
>
>  static void npu2_scom_write(uint64_t gcid, uint64_t scom_base,
>  			    uint64_t reg, uint64_t size,
>  			    uint64_t val)
>  {
> +	uint64_t isd = is_p9dd1() ? NPU2_DD1_MISC_SCOM_IND_SCOM_DATA :
> +				    NPU2_MISC_SCOM_IND_SCOM_DATA;
> +
>  	npu2_scom_set_addr(gcid, scom_base, reg, size);
> -	xscom_write(gcid, scom_base + NPU2_MISC_SCOM_IND_SCOM_DATA, val);
> +	xscom_write(gcid, scom_base + isd, val);
>  }
>
>  static uint64_t npu2_scom_read(uint64_t gcid, uint64_t scom_base,
> diff --git a/include/npu2-regs.h b/include/npu2-regs.h
> index 2ddfd4b..4b86f6f 100644
> --- a/include/npu2-regs.h
> +++ b/include/npu2-regs.h
> @@ -441,11 +441,13 @@ void npu2_write_mask(struct npu2 *p, uint64_t reg, uint64_t val, uint64_t mask);
>  #define NPU2_XTS_MMIO_ATSD_STATUS		0x010
>
>  /* ALTD SCOM addresses */
> -#define NPU2_MISC_SCOM_IND_SCOM_ADDR		0x38e
> +#define NPU2_DD1_MISC_SCOM_IND_SCOM_ADDR	0x38e
> +#define NPU2_MISC_SCOM_IND_SCOM_ADDR		0x68e
>  #define  NPU2_MISC_DA_ADDR			PPC_BITMASK(0, 23)
>  #define  NPU2_MISC_DA_LEN			PPC_BITMASK(24, 25)
>  #define   NPU2_MISC_DA_LEN_4B			2
>  #define   NPU2_MISC_DA_LEN_8B			3
> -#define NPU2_MISC_SCOM_IND_SCOM_DATA   		0x38f
> +#define NPU2_DD1_MISC_SCOM_IND_SCOM_DATA	0x38f
> +#define NPU2_MISC_SCOM_IND_SCOM_DATA		0x68f
>
>  #endif /* __NPU2_REGS_H */
>

-- 
Andrew Donnellan              OzLabs, ADL Canberra
andrew.donnellan at au1.ibm.com  IBM Australia Limited