[Skiboot] [PATCH] add NX-842 coproc support
Dan Streetman
ddstreet at us.ibm.com
Wed Jan 14 03:54:44 AEDT 2015
Add support for the 842 hw memory compression engine in the NX Coprocessor.
This moves the existing RNG support into its own nx-rng.c file, adds 842
support in a nx-842.c file, and creates a nx-crypto.c file to configure and
disable the crypto engines (which are not supported yet).
New nodes are created for each 842 engine found. This does not actually
process any of the data or drive the 842 engines, it only configures
registers to set up and enable/disable the engines appropriately, and
creates new nodes so the OS can drive the 842 engines.
Signed-off-by: Dan Streetman <ddstreet at us.ibm.com>
---
I have a initial working 842 kernel driver as well. I'm currently
not using interrupts, but eventually I will need to update this to
configure the NX registers to use interrupts.
hw/Makefile.inc | 3 +-
hw/nx-842.c | 198 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
hw/nx-crypto.c | 205 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
hw/nx-rng.c | 99 +++++++++++++++++++++++++++
hw/nx.c | 105 ++---------------------------
include/nx.h | 135 +++++++++++++++++++++++++++++++++++++
6 files changed, 645 insertions(+), 100 deletions(-)
create mode 100644 hw/nx-842.c
create mode 100644 hw/nx-crypto.c
create mode 100644 hw/nx-rng.c
diff --git a/hw/Makefile.inc b/hw/Makefile.inc
index 83125be..416d23c 100644
--- a/hw/Makefile.inc
+++ b/hw/Makefile.inc
@@ -2,7 +2,8 @@
SUBDIRS += hw
HW_OBJS = xscom.o chiptod.o gx.o cec.o lpc.o lpc-uart.o psi.o
-HW_OBJS += homer.o slw.o occ.o nx.o fsi-master.o centaur.o
+HW_OBJS += homer.o slw.o occ.o fsi-master.o centaur.o
+HW_OBJS += nx.o nx-rng.o nx-crypto.o nx-842.o
HW_OBJS += p7ioc.o p7ioc-inits.o p7ioc-phb.o p5ioc2.o p5ioc2-phb.o
HW_OBJS += phb3.o sfc-ctrl.o fake-rtc.o bt.o p8-i2c.o
HW=hw/built-in.o
diff --git a/hw/nx-842.c b/hw/nx-842.c
new file mode 100644
index 0000000..9b297fa
--- /dev/null
+++ b/hw/nx-842.c
@@ -0,0 +1,198 @@
+/* Copyright 2015 IBM Corp.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
+ * implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+
+
+#include <skiboot.h>
+#include <xscom.h>
+#include <io.h>
+#include <cpu.h>
+#include <nx.h>
+
+static u64 nx_842_ci = 1;
+
+static int nx_cfg_842(u32 gcid, u64 xcfg, u64 instance)
+{
+ u64 cfg, ci, ct;
+ int rc;
+
+ rc = xscom_read(gcid, xcfg, &cfg);
+ if (rc)
+ return rc;
+
+ ct = GETFIELD(NX_P8_842_CFG_CT, cfg);
+ if (!ct)
+ printf("NX%d: 842 CT set to %u\n", gcid, NX_CT_842);
+ else if (ct == NX_CT_842)
+ printf("NX%d: 842 CT already set to %u\n", gcid, NX_CT_842);
+ else
+ printf("NX%d: 842 CT already set to %u, changing to %u\n",
+ gcid, (unsigned int)ct, NX_CT_842);
+ ct = NX_CT_842;
+ cfg = SETFIELD(NX_P8_842_CFG_CT, cfg, ct);
+
+ /* Coprocessor Instance must be shifted left.
+ * See hw doc Section 5.5.1.
+ */
+ ci = GETFIELD(NX_P8_842_CFG_CI, cfg) >> NX_P8_842_CFG_CI_LSHIFT;
+ if (ci) {
+ printf("NX%d: 842 CI already set to %u\n",
+ gcid, (unsigned int)ci);
+ } else {
+ ci = instance;
+ if (ci > NX_P8_842_CFG_CI_MAX) {
+ prerror("NX%d: ERROR: 842 CI %u exceeds max %u\n",
+ gcid, (unsigned int)ci,
+ NX_P8_842_CFG_CI_MAX);
+ return OPAL_INTERNAL_ERROR;
+ }
+ cfg = SETFIELD(NX_P8_842_CFG_CI, cfg,
+ ci << NX_P8_842_CFG_CI_LSHIFT);
+ printf("NX%d: 842 CI set to %u\n", gcid, (unsigned int)ci);
+ }
+
+ /* Enable all functions */
+ cfg = SETFIELD(NX_P8_842_CFG_FC_ENABLE, cfg, 0x1f);
+
+ /* Enable this engine */
+ cfg |= NX_P8_842_CFG_ENABLE;
+
+ rc = xscom_write(gcid, xcfg, cfg);
+ if (rc)
+ prerror("NX%d: ERROR: 842 CT %u CI %u config failure %d\n",
+ gcid, (unsigned int)ct, (unsigned int)ci, rc);
+ else
+ printf("NX%d: 842 Config 0x%016lx\n",
+ gcid, (unsigned long)cfg);
+
+ return rc;
+}
+
+static int nx_cfg_dma(u32 gcid, u64 xcfg)
+{
+ u64 cfg;
+ int rc;
+
+ rc = xscom_read(gcid, xcfg, &cfg);
+ if (rc)
+ return rc;
+
+ if (NX_DMA_842_COMPRESS_PREFETCH)
+ cfg = cfg | NX_P8_DMA_CFG_842_COMPRESS_PREFETCH;
+ if (NX_DMA_842_DECOMPRESS_PREFETCH)
+ cfg = cfg | NX_P8_DMA_CFG_842_DECOMPRESS_PREFETCH;
+
+ cfg = SETFIELD(NX_P8_DMA_CFG_842_COMPRESS_MAX_RR, cfg,
+ NX_DMA_842_COMPRESS_MAX_RR);
+ cfg = SETFIELD(NX_P8_DMA_CFG_842_DECOMPRESS_MAX_RR, cfg,
+ NX_DMA_842_DECOMPRESS_MAX_RR);
+
+ if (NX_DMA_842_SPBC)
+ cfg = cfg | NX_P8_DMA_CFG_842_SPBC;
+
+ cfg = SETFIELD(NX_P8_DMA_CFG_842_CSB_WR, cfg,
+ NX_DMA_842_CSB_WR);
+ cfg = SETFIELD(NX_P8_DMA_CFG_842_COMPLETION_MODE, cfg,
+ NX_DMA_842_COMPLETION_MODE);
+ cfg = SETFIELD(NX_P8_DMA_CFG_842_CPB_WR, cfg,
+ NX_DMA_842_CPB_WR);
+ if (NX_DMA_842_OUTPUT_WR)
+ cfg = cfg | NX_P8_DMA_CFG_842_OUTPUT_DATA_WR;
+
+ rc = xscom_write(gcid, xcfg, cfg);
+ if (rc)
+ prerror("NX%d: ERROR: DMA config failure %d\n", gcid, rc);
+ else
+ printf("NX%d: DMA 0x%016lx\n", gcid, (unsigned long)cfg);
+
+ return rc;
+}
+
+static int nx_cfg_ee(u32 gcid, u64 xcfg)
+{
+ u64 cfg;
+ int rc;
+
+ rc = xscom_read(gcid, xcfg, &cfg);
+ if (rc)
+ return rc;
+
+ cfg |= NX_P8_EE_CFG_842_1;
+ cfg |= NX_P8_EE_CFG_842_0;
+
+ rc = xscom_write(gcid, xcfg, cfg);
+ if (rc)
+ prerror("NX%d: ERROR: Engine Enable failure %d\n", gcid, rc);
+ else
+ printf("NX%d: Engine Enable 0x%016lx\n",
+ gcid, (unsigned long)cfg);
+
+ return rc;
+}
+
+void nx_create_842_node(struct dt_node *node)
+{
+ u32 gcid;
+ u32 pb_base;
+ u64 cfg_842, cfg_ee, cfg_dma;
+ u64 instance;
+ struct dt_node *dt_842;
+ int rc;
+ char node_name[32];
+
+ gcid = dt_get_chip_id(node);
+ pb_base = dt_get_address(node, 0, NULL);
+
+ printf("NX%d: 842 at 0x%x\n", gcid, pb_base);
+
+ if (dt_node_is_compatible(node, "ibm,power7-nx")) {
+ prerror("NX%d: ERROR: 842 not supported on Power7\n", gcid);
+ return;
+ } else if (dt_node_is_compatible(node, "ibm,power8-nx")) {
+ cfg_842 = pb_base + NX_P8_842_CFG;
+ cfg_ee = pb_base + NX_P8_EE_CFG;
+ cfg_dma = pb_base + NX_P8_DMA_CFG;
+ } else {
+ prerror("NX%d: ERROR: Unknown NX type!\n", gcid);
+ return;
+ }
+
+ rc = nx_cfg_dma(gcid, cfg_dma);
+ if (rc)
+ return;
+
+ instance = nx_842_ci++;
+ rc = nx_cfg_842(gcid, cfg_842, instance);
+ if (rc)
+ return;
+
+ rc = nx_cfg_ee(gcid, cfg_ee);
+ if (rc)
+ return;
+
+ printf("NX%d: 842 Coprocessor Enabled\n", gcid);
+
+ snprintf(node_name, sizeof(node_name),
+ "ibm,nx842-powernv-v1#%d", gcid);
+ dt_842 = dt_new(dt_root, node_name);
+ if (!dt_842)
+ return;
+
+ dt_add_property_strings(dt_842, "compatible", "ibm,nx842-powernv");
+ dt_add_property_cells(dt_842, "ibm,chip-id", gcid);
+ dt_add_property_cells(dt_842, "ibm,coprocessor-type", NX_CT_842);
+ dt_add_property_cells(dt_842, "ibm,coprocessor-instance", instance);
+}
diff --git a/hw/nx-crypto.c b/hw/nx-crypto.c
new file mode 100644
index 0000000..7345e77
--- /dev/null
+++ b/hw/nx-crypto.c
@@ -0,0 +1,205 @@
+/* Copyright 2015 IBM Corp.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
+ * implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+
+
+#include <skiboot.h>
+#include <xscom.h>
+#include <io.h>
+#include <cpu.h>
+#include <nx.h>
+
+static u64 nx_sym_ci = 1;
+static u64 nx_asym_ci = 1;
+
+static int nx_cfg_sym(u32 gcid, u64 xcfg, u64 instance)
+{
+ u64 cfg, ci, ct;
+ int rc;
+
+ rc = xscom_read(gcid, xcfg, &cfg);
+ if (rc)
+ return rc;
+
+ ct = GETFIELD(NX_P8_SYM_CFG_CT, cfg);
+ if (!ct)
+ printf("NX%d: SYM CT set to %u\n", gcid, NX_CT_SYM);
+ else if (ct == NX_CT_SYM)
+ printf("NX%d: SYM CT already set to %u\n", gcid, NX_CT_SYM);
+ else
+ printf("NX%d: SYM CT already set to %u, changing to %u\n",
+ gcid, (unsigned int)ct, NX_CT_SYM);
+ ct = NX_CT_SYM;
+ cfg = SETFIELD(NX_P8_SYM_CFG_CT, cfg, ct);
+
+ /* Coprocessor Instance must be shifted left.
+ * See hw doc Section 5.5.1.
+ */
+ ci = GETFIELD(NX_P8_SYM_CFG_CI, cfg) >> NX_P8_SYM_CFG_CI_LSHIFT;
+ if (ci) {
+ printf("NX%d: SYM CI already set to %u\n",
+ gcid, (unsigned int)ci);
+ } else {
+ ci = instance;
+ if (ci > NX_P8_SYM_CFG_CI_MAX) {
+ prerror("NX%d: ERROR: SYM CI %u exceeds max %u\n",
+ gcid, (unsigned int)ci, NX_P8_SYM_CFG_CI_MAX);
+ return OPAL_INTERNAL_ERROR;
+ }
+ cfg = SETFIELD(NX_P8_SYM_CFG_CI, cfg,
+ ci << NX_P8_SYM_CFG_CI_LSHIFT);
+ printf("NX%d: SYM CI set to %u\n", gcid, (unsigned int)ci);
+ }
+
+ /* Disable all functions until supported */
+ cfg = SETFIELD(NX_P8_SYM_CFG_FC_ENABLE, cfg, 0);
+
+ /* Disable this engine, not supported yet */
+ cfg &= ~NX_P8_SYM_CFG_ENABLE;
+
+ rc = xscom_write(gcid, xcfg, cfg);
+ if (rc)
+ prerror("NX%d: ERROR: SYM CT %u CI %u config failure %d\n",
+ gcid, (unsigned int)ct, (unsigned int)ci, rc);
+ else
+ printf("NX%d: SYM Config 0x%016lx\n",
+ gcid, (unsigned long)cfg);
+
+ return rc;
+}
+
+static int nx_cfg_asym(u32 gcid, u64 xcfg, u64 instance)
+{
+ u64 cfg, ci, ct;
+ int rc;
+
+ rc = xscom_read(gcid, xcfg, &cfg);
+ if (rc)
+ return rc;
+
+ ct = GETFIELD(NX_P8_ASYM_CFG_CT, cfg);
+ if (!ct)
+ printf("NX%d: ASYM CT set to %u\n", gcid, NX_CT_ASYM);
+ else if (ct == NX_CT_ASYM)
+ printf("NX%d: ASYM CT already set to %u\n",
+ gcid, NX_CT_ASYM);
+ else
+ printf("NX%d: ASYM CT already set to %u, changing to %u\n",
+ gcid, (unsigned int)ct, NX_CT_ASYM);
+ ct = NX_CT_ASYM;
+ cfg = SETFIELD(NX_P8_ASYM_CFG_CT, cfg, ct);
+
+ /* Coprocessor Instance must be shifted left.
+ * See hw doc Section 5.5.1.
+ */
+ ci = GETFIELD(NX_P8_ASYM_CFG_CI, cfg) >> NX_P8_ASYM_CFG_CI_LSHIFT;
+ if (ci) {
+ printf("NX%d: ASYM CI already set to %u\n",
+ gcid, (unsigned int)ci);
+ } else {
+ ci = instance;
+ if (ci > NX_P8_ASYM_CFG_CI_MAX) {
+ prerror("NX%d: ERROR: ASYM CI %u exceeds max %u\n",
+ gcid, (unsigned int)ci,
+ NX_P8_ASYM_CFG_CI_MAX);
+ return OPAL_INTERNAL_ERROR;
+ }
+ cfg = SETFIELD(NX_P8_ASYM_CFG_CI, cfg,
+ ci << NX_P8_ASYM_CFG_CI_LSHIFT);
+ printf("NX%d: ASYM CI set to %u\n", gcid, (unsigned int)ci);
+ }
+
+ /* Disable all functions until supported */
+ cfg = SETFIELD(NX_P8_ASYM_CFG_FC_ENABLE, cfg, 0);
+
+ /* Disable this engine, not supported yet */
+ cfg &= ~NX_P8_ASYM_CFG_ENABLE;
+
+ rc = xscom_write(gcid, xcfg, cfg);
+ if (rc)
+ prerror("NX%d: ERROR: ASYM CT %u CI %u config failure %d\n",
+ gcid, (unsigned int)ct, (unsigned int)ci, rc);
+ else
+ printf("NX%d: ASYM Config 0x%016lx\n",
+ gcid, (unsigned long)cfg);
+
+ return rc;
+}
+
+static int nx_cfg_ee(u32 gcid, u64 xcfg)
+{
+ u64 cfg;
+ int rc;
+
+ rc = xscom_read(gcid, xcfg, &cfg);
+ if (rc)
+ return rc;
+
+ cfg &= ~NX_P8_EE_CFG_AMF_3;
+ cfg &= ~NX_P8_EE_CFG_AMF_2;
+ cfg &= ~NX_P8_EE_CFG_AMF_1;
+ cfg &= ~NX_P8_EE_CFG_AMF_0;
+ cfg &= ~NX_P8_EE_CFG_SYM_1;
+ cfg &= ~NX_P8_EE_CFG_SYM_0;
+
+ rc = xscom_write(gcid, xcfg, cfg);
+ if (rc)
+ prerror("NX%d: ERROR: Engine Enable failure %d\n", gcid, rc);
+ else
+ printf("NX%d: Engine Enable 0x%016lx\n",
+ gcid, (unsigned long)cfg);
+
+ return rc;
+}
+
+void nx_create_crypto_node(struct dt_node *node)
+{
+ u32 gcid;
+ u32 pb_base;
+ u64 cfg_sym, cfg_asym, cfg_ee;
+ int rc;
+
+ gcid = dt_get_chip_id(node);
+ pb_base = dt_get_address(node, 0, NULL);
+
+ printf("NX%d: Crypto at 0x%x\n", gcid, pb_base);
+
+ if (dt_node_is_compatible(node, "ibm,power7-nx")) {
+ prerror("NX%d: ERROR: Crypto not supported on Power7\n", gcid);
+ return;
+ } else if (dt_node_is_compatible(node, "ibm,power8-nx")) {
+ cfg_sym = pb_base + NX_P8_SYM_CFG;
+ cfg_asym = pb_base + NX_P8_ASYM_CFG;
+ cfg_ee = pb_base + NX_P8_EE_CFG;
+ } else {
+ prerror("NX%d: ERROR: Unknown NX type!\n", gcid);
+ return;
+ }
+
+ rc = nx_cfg_sym(gcid, cfg_sym, nx_sym_ci++);
+ if (rc)
+ return;
+
+ rc = nx_cfg_asym(gcid, cfg_asym, nx_asym_ci++);
+ if (rc)
+ return;
+
+ rc = nx_cfg_ee(gcid, cfg_ee);
+ if (rc)
+ return;
+
+ printf("NX%d: Crypto Coprocessors Disabled (not supported)\n", gcid);
+}
diff --git a/hw/nx-rng.c b/hw/nx-rng.c
new file mode 100644
index 0000000..c4980b9
--- /dev/null
+++ b/hw/nx-rng.c
@@ -0,0 +1,99 @@
+/* Copyright 2013-2015 IBM Corp.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
+ * implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+
+
+#include <skiboot.h>
+#include <xscom.h>
+#include <io.h>
+#include <cpu.h>
+#include <nx.h>
+
+void nx_create_rng_node(struct dt_node *node)
+{
+ u64 bar, cfg;
+ u64 xbar, xcfg;
+ u32 pb_base;
+ u32 gcid;
+ u64 rng_addr, rng_len, len;
+ struct dt_node *rng;
+ int rc;
+
+ gcid = dt_get_chip_id(node);
+ pb_base = dt_get_address(node, 0, NULL);
+
+ if (dt_node_is_compatible(node, "ibm,power7-nx")) {
+ xbar = pb_base + NX_P7_RNG_BAR;
+ xcfg = pb_base + NX_P7_RNG_CFG;
+ } else if (dt_node_is_compatible(node, "ibm,power8-nx")) {
+ xbar = pb_base + NX_P8_RNG_BAR;
+ xcfg = pb_base + NX_P8_RNG_CFG;
+ } else {
+ prerror("NX%d: Unknown NX type!\n", gcid);
+ return;
+ }
+
+ rc = xscom_read(gcid, xbar, &bar); /* Get RNG BAR */
+ if (rc)
+ return; /* Hope xscom always prints error message */
+
+ rc = xscom_read(gcid, xcfg, &cfg); /* Get RNG CFG */
+ if (rc)
+ return;
+
+ /*
+ * We use the P8 BAR constants. The layout of the BAR is the
+ * same, with more bits at the top of P8 which are hard wired to
+ * 0 on P7. We also mask in-place rather than using GETFIELD
+ * for the base address as we happen to *know* that it's properly
+ * aligned in the register.
+ *
+ * FIXME? Always assusme BAR gets a valid address from FSP
+ */
+ rng_addr = bar & NX_P8_RNG_BAR_ADDR_MASK;
+ len = GETFIELD(NX_P8_RNG_BAR_SIZE, bar);
+ if (len > 4) {
+ prerror("NX%d: Corrupted bar size %lld\n", gcid, len);
+ return;
+ }
+ rng_len = (u64[]){ 0x1000, /* 4K */
+ 0x10000, /* 64K */
+ 0x400000000, /* 16G*/
+ 0x100000, /* 1M */
+ 0x1000000 /* 16M */} [len];
+
+
+ printf("NX%d: RNG BAR set to 0x%016llx..0x%016llx\n",
+ gcid, rng_addr, rng_addr + rng_len - 1);
+
+ /* RNG must be enabled before MMIO is enabled */
+ rc = xscom_write(gcid, xcfg, cfg | NX_P8_RNG_CFG_ENABLE);
+ if (rc)
+ return;
+
+ /* The BAR needs to be enabled too */
+ rc = xscom_write(gcid, xbar, bar | NX_P8_RNG_BAR_ENABLE);
+ if (rc)
+ return;
+ rng = dt_new_addr(dt_root, "hwrng", rng_addr);
+ if (!rng)
+ return;
+
+ dt_add_property_strings(rng, "compatible", "ibm,power-rng");
+ dt_add_property_cells(rng, "reg", hi32(rng_addr), lo32(rng_addr),
+ hi32(rng_len), lo32(rng_len));
+ dt_add_property_cells(rng, "ibm,chip-id", gcid);
+}
diff --git a/hw/nx.c b/hw/nx.c
index 8f42717..83528d1 100644
--- a/hw/nx.c
+++ b/hw/nx.c
@@ -1,4 +1,4 @@
-/* Copyright 2013-2014 IBM Corp.
+/* Copyright 2013-2015 IBM Corp.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
@@ -22,106 +22,13 @@
#include <cpu.h>
#include <nx.h>
-#define NX_P7_RNG_BAR XSCOM_SAT(0x1, 0x2, 0x0c)
-#define NX_P7_RNG_BAR_ADDR_MASK PPC_BITMASK(18, 51)
-#define NX_P7_RNG_BAR_ADDR_LSH PPC_BITLSHIFT(51)
-#define NX_P7_RNG_BAR_SIZE_MASK PPC_BITMASK(53, 55)
-#define NX_P7_RNG_BAR_SIZE_LSH PPC_BITLSHIFT(55)
-#define NX_P7_RNG_BAR_ENABLE PPC_BIT(52)
-
-#define NX_P8_RNG_BAR XSCOM_SAT(0xc, 0x2, 0x0d)
-#define NX_P8_RNG_BAR_ADDR_MASK PPC_BITMASK(14, 51)
-#define NX_P8_RNG_BAR_ADDR_LSH PPC_BITLSHIFT(51)
-#define NX_P8_RNG_BAR_SIZE_MASK PPC_BITMASK(53, 55)
-#define NX_P8_RNG_BAR_SIZE_LSH PPC_BITLSHIFT(55)
-#define NX_P8_RNG_BAR_ENABLE PPC_BIT(52)
-
-#define NX_P7_RNG_CFG XSCOM_SAT(0x1, 0x2, 0x12)
-#define NX_P7_RNG_CFG_ENABLE PPC_BIT(63)
-#define NX_P8_RNG_CFG XSCOM_SAT(0xc, 0x2, 0x12)
-#define NX_P8_RNG_CFG_ENABLE PPC_BIT(63)
-
-static void nx_create_node(struct dt_node *node)
-{
- u64 bar, cfg;
- u64 xbar, xcfg;
- u32 pb_base;
- u32 gcid;
- u64 rng_addr, rng_len, len;
- struct dt_node *rng;
- int rc;
-
- gcid = dt_get_chip_id(node);
- pb_base = dt_get_address(node, 0, NULL);
-
- if (dt_node_is_compatible(node, "ibm,power7-nx")) {
- xbar = pb_base + NX_P7_RNG_BAR;
- xcfg = pb_base + NX_P7_RNG_CFG;
- } else if (dt_node_is_compatible(node, "ibm,power8-nx")) {
- xbar = pb_base + NX_P8_RNG_BAR;
- xcfg = pb_base + NX_P8_RNG_CFG;
- } else {
- prerror("NX%d: Unknown NX type!\n", gcid);
- return;
- }
-
- rc = xscom_read(gcid, xbar, &bar); /* Get RNG BAR */
- if (rc)
- return; /* Hope xscom always prints error message */
-
- rc = xscom_read(gcid, xcfg, &cfg); /* Get RNG CFG */
- if (rc)
- return;
-
- /*
- * We use the P8 BAR constants. The layout of the BAR is the
- * same, with more bits at the top of P8 which are hard wired to
- * 0 on P7. We also mask in-place rather than using GETFIELD
- * for the base address as we happen to *know* that it's properly
- * aligned in the register.
- *
- * FIXME? Always assusme BAR gets a valid address from FSP
- */
- rng_addr = bar & NX_P8_RNG_BAR_ADDR_MASK;
- len = GETFIELD(NX_P8_RNG_BAR_SIZE, bar);
- if (len > 4) {
- prerror("NX%d: Corrupted bar size %lld\n", gcid, len);
- return;
- }
- rng_len = (u64[]){ 0x1000, /* 4K */
- 0x10000, /* 64K */
- 0x400000000, /* 16G*/
- 0x100000, /* 1M */
- 0x1000000 /* 16M */} [len];
-
-
- printf("NX%d: RNG BAR set to 0x%016llx..0x%016llx\n",
- gcid, rng_addr, rng_addr + rng_len - 1);
-
- /* RNG must be enabled before MMIO is enabled */
- rc = xscom_write(gcid, xcfg, cfg | NX_P8_RNG_CFG_ENABLE);
- if (rc)
- return;
-
- /* The BAR needs to be enabled too */
- rc = xscom_write(gcid, xbar, bar | NX_P8_RNG_BAR_ENABLE);
- if (rc)
- return;
- rng = dt_new_addr(dt_root, "hwrng", rng_addr);
- if (!rng)
- return;
-
- dt_add_property_strings(rng, "compatible", "ibm,power-rng");
- dt_add_property_cells(rng, "reg", hi32(rng_addr), lo32(rng_addr),
- hi32(rng_len), lo32(rng_len));
- dt_add_property_cells(rng, "ibm,chip-id", gcid);
-}
-
-/* Create nodes for MMIO accesible components in NX (only RNG) */
void nx_init(void)
{
struct dt_node *node;
- dt_for_each_compatible(dt_root, node, "ibm,power-nx")
- nx_create_node(node);
+ dt_for_each_compatible(dt_root, node, "ibm,power-nx") {
+ nx_create_rng_node(node);
+ nx_create_crypto_node(node);
+ nx_create_842_node(node);
+ }
}
diff --git a/include/nx.h b/include/nx.h
index ef02ed5..f443285 100644
--- a/include/nx.h
+++ b/include/nx.h
@@ -17,6 +17,141 @@
#ifndef __NX_H
#define __NX_H
+/* Random Number Generator */
+#define NX_P7_RNG_BAR XSCOM_SAT(0x1, 0x2, 0x0c)
+#define NX_P7_RNG_BAR_ADDR_MASK PPC_BITMASK(18, 51)
+#define NX_P7_RNG_BAR_ADDR_LSH PPC_BITLSHIFT(51)
+#define NX_P7_RNG_BAR_SIZE_MASK PPC_BITMASK(53, 55)
+#define NX_P7_RNG_BAR_SIZE_LSH PPC_BITLSHIFT(55)
+#define NX_P7_RNG_BAR_ENABLE PPC_BIT(52)
+#define NX_P8_RNG_BAR XSCOM_SAT(0xc, 0x2, 0x0d)
+#define NX_P8_RNG_BAR_ADDR_MASK PPC_BITMASK(14, 51)
+#define NX_P8_RNG_BAR_ADDR_LSH PPC_BITLSHIFT(51)
+#define NX_P8_RNG_BAR_SIZE_MASK PPC_BITMASK(53, 55)
+#define NX_P8_RNG_BAR_SIZE_LSH PPC_BITLSHIFT(55)
+#define NX_P8_RNG_BAR_ENABLE PPC_BIT(52)
+
+#define NX_P7_RNG_CFG XSCOM_SAT(0x1, 0x2, 0x12)
+#define NX_P7_RNG_CFG_ENABLE PPC_BIT(63)
+#define NX_P8_RNG_CFG XSCOM_SAT(0xc, 0x2, 0x12)
+#define NX_P8_RNG_CFG_ENABLE PPC_BIT(63)
+
+
+/* Symmetric Crypto */
+#define NX_P8_SYM_CFG XSCOM_SAT(0xc, 0x2, 0x0a)
+#define NX_P8_SYM_CFG_CI_MASK PPC_BITMASK(2, 14)
+#define NX_P8_SYM_CFG_CI_LSH PPC_BITLSHIFT(14)
+#define NX_P8_SYM_CFG_CT_MASK PPC_BITMASK(18, 23)
+#define NX_P8_SYM_CFG_CT_LSH PPC_BITLSHIFT(23)
+#define NX_P8_SYM_CFG_FC_ENABLE_MASK PPC_BITMASK(32, 39)
+#define NX_P8_SYM_CFG_FC_ENABLE_LSH PPC_BITLSHIFT(39)
+#define NX_P8_SYM_CFG_ENABLE PPC_BIT(63)
+
+
+/* Asymmetric Crypto */
+#define NX_P8_ASYM_CFG XSCOM_SAT(0xc, 0x2, 0x0b)
+#define NX_P8_ASYM_CFG_CI_MASK PPC_BITMASK(2, 14)
+#define NX_P8_ASYM_CFG_CI_LSH PPC_BITLSHIFT(14)
+#define NX_P8_ASYM_CFG_CT_MASK PPC_BITMASK(18, 23)
+#define NX_P8_ASYM_CFG_CT_LSH PPC_BITLSHIFT(23)
+#define NX_P8_ASYM_CFG_FC_ENABLE_MASK PPC_BITMASK(32, 52)
+#define NX_P8_ASYM_CFG_FC_ENABLE_LSH PPC_BITLSHIFT(52)
+#define NX_P8_ASYM_CFG_ENABLE PPC_BIT(63)
+
+
+/* 842 Compression */
+#define NX_P8_842_CFG XSCOM_SAT(0xc, 0x2, 0x0c)
+#define NX_P8_842_CFG_CI_MASK PPC_BITMASK(2, 14)
+#define NX_P8_842_CFG_CI_LSH PPC_BITLSHIFT(14)
+#define NX_P8_842_CFG_CT_MASK PPC_BITMASK(18, 23)
+#define NX_P8_842_CFG_CT_LSH PPC_BITLSHIFT(23)
+#define NX_P8_842_CFG_FC_ENABLE_MASK PPC_BITMASK(32, 36)
+#define NX_P8_842_CFG_FC_ENABLE_LSH PPC_BITLSHIFT(36)
+#define NX_P8_842_CFG_ENABLE PPC_BIT(63)
+
+
+/* DMA */
+#define NX_P8_DMA_CFG XSCOM_SAT(0xc, 0x1, 0x02)
+#define NX_P8_DMA_CFG_842_COMPRESS_PREFETCH PPC_BIT(23)
+#define NX_P8_DMA_CFG_842_DECOMPRESS_PREFETCH PPC_BIT(24)
+#define NX_P8_DMA_CFG_AES_SHA_MAX_RR_MASK PPC_BITMASK(25, 28)
+#define NX_P8_DMA_CFG_AES_SHA_MAX_RR_LSH PPC_BITLSHIFT(28)
+#define NX_P8_DMA_CFG_AMF_MAX_RR_MASK PPC_BITMASK(29, 32)
+#define NX_P8_DMA_CFG_AMF_MAX_RR_LSH PPC_BITLSHIFT(32)
+#define NX_P8_DMA_CFG_842_COMPRESS_MAX_RR_MASK PPC_BITMASK(33, 36)
+#define NX_P8_DMA_CFG_842_COMPRESS_MAX_RR_LSH PPC_BITLSHIFT(36)
+#define NX_P8_DMA_CFG_842_DECOMPRESS_MAX_RR_MASK PPC_BITMASK(37, 40)
+#define NX_P8_DMA_CFG_842_DECOMPRESS_MAX_RR_LSH PPC_BITLSHIFT(40)
+#define NX_P8_DMA_CFG_AES_SHA_CSB_WR_MASK PPC_BITMASK(41, 42)
+#define NX_P8_DMA_CFG_AES_SHA_CSB_WR_LSH PPC_BITLSHIFT(42)
+#define NX_P8_DMA_CFG_AES_SHA_COMPLETION_MODE_MASK PPC_BITMASK(43, 44)
+#define NX_P8_DMA_CFG_AES_SHA_COMPLETION_MODE_LSH PPC_BITLSHIFT(44)
+#define NX_P8_DMA_CFG_AES_SHA_CPB_WR_MASK PPC_BITMASK(45, 46)
+#define NX_P8_DMA_CFG_AES_SHA_CPB_WR_LSH PPC_BITLSHIFT(46)
+#define NX_P8_DMA_CFG_AES_SHA_OUTPUT_DATA_WR PPC_BIT(47)
+#define NX_P8_DMA_CFG_AMF_CSB_WR_MASK PPC_BITMASK(49, 50)
+#define NX_P8_DMA_CFG_AMF_CSB_WR_LSH PPC_BITLSHIFT(50)
+#define NX_P8_DMA_CFG_AMF_COMPLETION_MODE_MASK PPC_BITMASK(51, 52)
+#define NX_P8_DMA_CFG_AMF_COMPLETION_MODE_LSH PPC_BITLSHIFT(52)
+#define NX_P8_DMA_CFG_AMF_CPB_WR_MASK PPC_BITMASK(53, 54)
+#define NX_P8_DMA_CFG_AMF_CPB_WR_LSH PPC_BITLSHIFT(54)
+#define NX_P8_DMA_CFG_AMF_OUTPUT_DATA_WR PPC_BIT(55)
+#define NX_P8_DMA_CFG_842_SPBC PPC_BIT(56)
+#define NX_P8_DMA_CFG_842_CSB_WR_MASK PPC_BITMASK(57, 58)
+#define NX_P8_DMA_CFG_842_CSB_WR_LSH PPC_BITLSHIFT(58)
+#define NX_P8_DMA_CFG_842_COMPLETION_MODE_MASK PPC_BITMASK(59, 60)
+#define NX_P8_DMA_CFG_842_COMPLETION_MODE_LSH PPC_BITLSHIFT(60)
+#define NX_P8_DMA_CFG_842_CPB_WR_MASK PPC_BITMASK(61, 62)
+#define NX_P8_DMA_CFG_842_CPB_WR_LSH PPC_BITLSHIFT(62)
+#define NX_P8_DMA_CFG_842_OUTPUT_DATA_WR PPC_BIT(63)
+
+
+/* Engine Enable Register */
+#define NX_P8_EE_CFG XSCOM_SAT(0xc, 0x1, 0x01)
+#define NX_P8_EE_CFG_EFUSE PPC_BIT(0)
+#define NX_P8_EE_CFG_AMF_3 PPC_BIT(53)
+#define NX_P8_EE_CFG_AMF_2 PPC_BIT(54)
+#define NX_P8_EE_CFG_AMF_1 PPC_BIT(55)
+#define NX_P8_EE_CFG_AMF_0 PPC_BIT(56)
+#define NX_P8_EE_CFG_SYM_1 PPC_BIT(57)
+#define NX_P8_EE_CFG_SYM_0 PPC_BIT(58)
+#define NX_P8_EE_CFG_842_1 PPC_BIT(62)
+#define NX_P8_EE_CFG_842_0 PPC_BIT(63)
+
+
+/* Configuration parameters */
+#define NX_DMA_842_COMPRESS_PREFETCH 1
+#define NX_DMA_842_DECOMPRESS_PREFETCH 1
+#define NX_DMA_842_COMPRESS_MAX_RR 1
+#define NX_DMA_842_DECOMPRESS_MAX_RR 1
+#define NX_DMA_842_SPBC 1
+#define NX_DMA_842_CSB_WR 0
+#define NX_DMA_842_COMPLETION_MODE 0
+#define NX_DMA_842_CPB_WR 0
+#define NX_DMA_842_OUTPUT_WR 0
+
+
+/* Arbitrary Coprocessor Type values */
+#define NX_CT_842 1
+#define NX_CT_SYM 2
+#define NX_CT_ASYM 3
+
+
+/* Coprocessor Instance counter
+ * P8 NX workbook, section 5.5.1
+ * "Assigning <CT,CI> Values"
+ */
+#define NX_P8_SYM_CFG_CI_MAX 511
+#define NX_P8_SYM_CFG_CI_LSHIFT 2
+#define NX_P8_ASYM_CFG_CI_MAX 127
+#define NX_P8_ASYM_CFG_CI_LSHIFT 4
+#define NX_P8_842_CFG_CI_MAX 511
+#define NX_P8_842_CFG_CI_LSHIFT 2
+
+extern void nx_create_rng_node(struct dt_node *);
+extern void nx_create_crypto_node(struct dt_node *);
+extern void nx_create_842_node(struct dt_node *);
+
extern void nx_init(void);
#endif /* __NX_H */
--
1.8.3.1
More information about the Skiboot
mailing list