[rhype] error booting 2.6.11

[Sushant Sharma]

okay, so --with-controlling-os has to be "controller" and we can specify
linux boot image using --with-controller-images.
I tried configuring with
  ../rhype/configure --enable-thinwire --with-serial-baudrate=9600
--with-controlling-os=/home/sushant/hypervisor/build/test/controller
--with-controller-images=/home/sushant/hypervisor/vmlinux

I saw
>Choose one of the following images.

and linux image was not among the options given.
so I added --enable-reloader while configuring rhype and got the
following error

>CPUID: processor 0xf24, features 0x3febfbff
>Page allocator space: 0xfc1a5000 - 0xfc2eefff, 0xfc2ef000 - 0xffffffff
>Page allocator marked used: 0xfc263000 - 0xfc2eefff
>PIC init
>Assigned memory PA:0x4000000[0x18000000] -> LA:0x0
>arch_os_thread: thread lpid 0x1001, cr3 0x262000
>About to resume into controller ...
>hello world.. this is controller
>setting my sched slot to 0x1
>Scheduler controller: rot: 0 (0x0000000000000001, 0x0000000000000001 
0x0000000000000001)
>load_image: copying bits from yield: to 0x600000[0x426dc]
>Copying partition img: 0x1485f8[0x426dc] -> 0x600000
>Copying partition img: 0x147400[0x78] -> 0x6425a0
>Building device entries for partition 0xffffffff
>insert prop image @: 0x3f00000, 0x900
>Copying partition img: 0x18ce20[0x900] -> 0x3f00000
>
>
>Need to relocate OS!
>chunk 0: from=0x00600000 - 0x006426dc to 0x00100000 - 0x001426dc [0x426dc]
>chunk 1: from=0x006425a0 - 0x00642618 to 0x001425a0 - 0x00142618 [0x78]
>Copying relocator to 0x642700
>putting run_info [128] information to 0x642800
>New stack pointer at 0x642900
>../../rhype/hype/x86/././vm.c:156: ASSERT(vaddr < HV_VBASE)
>bad vaddr
>BREAKPOINT

am I not doing something that I should have done?

thanks in advance
-
Sushant

Jimi Xenidis wrote:
> 
> Please see rhype/INSTALL or rhype/configure --help.
> If its still unclear please let us know how it could be clearer.
> -JX