[PATCH v2 1/7] i2c: npcm: restore slave addresses array length

[Tyrone Ting]

The smatch check warning is "buffer overflow 'npcm_i2caddr' 2 <= 9".
The original design supports 10 slave addresses although only 2
addresses are required for current implementation.

Restore the npcm_i2caddr array length to fix the smatch warning.

Fixes: 47d506d1a28f ("i2c: npcm: Remove own slave addresses 2:10")
Reported-by: Dan Carpenter <dan.carpenter at linaro.org>
Closes: https://lore.kernel.org/r/202408130818.FgDP5uNm-lkp@intel.com/
Signed-off-by: Tyrone Ting <kfting at nuvoton.com>
---
 drivers/i2c/busses/i2c-npcm7xx.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/busses/i2c-npcm7xx.c b/drivers/i2c/busses/i2c-npcm7xx.c
index 2fe68615942e..bbcb4d6668ce 100644
--- a/drivers/i2c/busses/i2c-npcm7xx.c
+++ b/drivers/i2c/busses/i2c-npcm7xx.c
@@ -136,11 +136,13 @@ enum i2c_addr {
  * Since the addr regs are sprinkled all over the address space,
  * use this array to get the address or each register.
  */
-#define I2C_NUM_OWN_ADDR 2
+#define I2C_NUM_OWN_ADDR 10
 #define I2C_NUM_OWN_ADDR_SUPPORTED 2
 
 static const int npcm_i2caddr[I2C_NUM_OWN_ADDR] = {
-	NPCM_I2CADDR1, NPCM_I2CADDR2,
+	NPCM_I2CADDR1, NPCM_I2CADDR2, NPCM_I2CADDR3, NPCM_I2CADDR4,
+	NPCM_I2CADDR5, NPCM_I2CADDR6, NPCM_I2CADDR7, NPCM_I2CADDR8,
+	NPCM_I2CADDR9, NPCM_I2CADDR10,
 };
 #endif
 
-- 
2.34.1