[PATCH v2 0/7] i2c: npcm: Bug fixes read/write operation, checkpatch

[Tyrone Ting]

This patchset includes the following fixes:

- Restore the npcm_i2caddr array length to fix the smatch warning.
- Enable the target functionality in the interrupt handling routine 
  when the i2c transfer is about to finish.
- Correct the read/write operation procedure.
- Introduce a software flag to handle the bus error (BER) condition
  which is not caused by the i2c transfer.
- Modify timeout calculation.
- Assign the client address earlier logically.
- Use an i2c frequency table for the frequency parameters assignment.
- Coding style fix.

The NPCM I2C driver is tested on NPCM750 and NPCM845 evaluation boards.

Addressed comments from:
- kernel test robot : https://lore.kernel.org/oe-kbuild-all/
  202408080319.de2B6PgU-lkp at intel.com/
- Dan Carpenter : https://lore.kernel.org/all/202408130818
  .FgDP5uNm-lkp at intel.com/
- Andrew Jeffery : https://lore.kernel.org/lkml/
  20240807100244.16872-7-kfting at nuvoton.com/T/
  #m3ed3351bf59675bfe0de89c75aae1fb26cad5567

Changes since version 1:
- Restore the npcm_i2caddr array length to fix the smatch warning.
- Remove unused variables.
- Handle the condition where scl_table_cnt reaches to the maximum value.
- Fix the checkpatch warning.

Charles Boyer (1):
  i2c: npcm: Enable slave in eob interrupt

Tyrone Ting (6):
  i2c: npcm: restore slave addresses array length
  i2c: npcm: correct the read/write operation procedure
  i2c: npcm: use a software flag to indicate a BER condition
  i2c: npcm: Modify timeout evaluation mechanism
  i2c: npcm: Modify the client address assignment
  i2c: npcm: use i2c frequency table

 drivers/i2c/busses/i2c-npcm7xx.c | 276 +++++++++++++++++++------------
 1 file changed, 172 insertions(+), 104 deletions(-)


base-commit: 5be63fc19fcaa4c236b307420483578a56986a37
-- 
2.34.1