[u-boot,v2019.04-aspeed-openbmc v3 1/1] arm: dts: Aspeed: add Bletchley dts
Potin Lai (賴柏廷)
Potin.Lai at quantatw.com
Tue Feb 22 13:25:44 AEDT 2022
Joel Stanley 於 2022/2/22 上午 10:14 寫道:
> On Mon, 21 Feb 2022 at 11:02, Potin Lai (賴柏廷) <Potin.Lai at quantatw.com> wrote:
>> On 2/11/22 08:54, Potin Lai (賴柏廷) wrote:
>>> Initial introduction of Bletchley equipped with
>>> Aspeed 2600 BMC SoC.
>>>
>>> Signed-off-by: Potin Lai <potin.lai at quantatw.com>
>>>
>>> ---
>>>
>>> change v2 -> v3:
>>> * update model & compatible to match with kernel dts
>>>
>>> change v1 -> v2:
>>> * sort Makefile alphabetically
>>> * add licence and copyright
>>> * update model name
>>> * remove the nodes not using (fsi, emmc, sdhci, ehci, pcie & display_port)
>> Hi Joel, could you help review this patch and let me know if any modification needed? Many thanks
> It looks good. I've applied it to the openbmc u-boot tree.
>
> In the future, please try to get some reviews from your colleagues.
>
> Cheers,
>
> Joel
Thanks a lot for you help and advice.
Potin
>
>> Potin
>>
>>> ---
>>> arch/arm/dts/Makefile | 9 +-
>>> arch/arm/dts/ast2600-bletchley.dts | 223 +++++++++++++++++++++++++++++
>>> 2 files changed, 228 insertions(+), 4 deletions(-)
>>> create mode 100644 arch/arm/dts/ast2600-bletchley.dts
>>>
>>> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
>>> index df844065cd..ac93a89c07 100755
>>> --- a/arch/arm/dts/Makefile
>>> +++ b/arch/arm/dts/Makefile
>>> @@ -677,15 +677,16 @@ dtb-$(CONFIG_ARCH_BCM6858) += \
>>> dtb-$(CONFIG_ARCH_ASPEED) += \
>>> ast2400-evb.dtb \
>>> ast2500-evb.dtb \
>>> - ast2600-evb.dtb \
>>> - ast2600-ncsi.dtb \
>>> ast2600a0-evb.dtb \
>>> ast2600a1-evb.dtb \
>>> + ast2600-bletchley.dtb \
>>> + ast2600-evb.dtb \
>>> ast2600-fpga.dtb \
>>> + ast2600-intel.dtb \
>>> + ast2600-ncsi.dtb \
>>> ast2600-rainier.dtb \
>>> ast2600-slt.dtb \
>>> - ast2600-tacoma.dtb \
>>> - ast2600-intel.dtb
>>> + ast2600-tacoma.dtb
>>>
>>> dtb-$(CONFIG_ARCH_STI) += stih410-b2260.dtb
>>>
>>> diff --git a/arch/arm/dts/ast2600-bletchley.dts b/arch/arm/dts/ast2600-bletchley.dts
>>> new file mode 100644
>>> index 0000000000..57ca845b94
>>> --- /dev/null
>>> +++ b/arch/arm/dts/ast2600-bletchley.dts
>>> @@ -0,0 +1,223 @@
>>> +// SPDX-License-Identifier: GPL-2.0+
>>> +// Copyright (c) 2022 Meta Platforms Inc.
>>> +/dts-v1/;
>>> +
>>> +#include "ast2600-u-boot.dtsi"
>>> +
>>> +/ {
>>> + model = "Facebook Bletchley BMC";
>>> + compatible = "facebook,bletchley-bmc", "aspeed,ast2600";
>>> +
>>> + memory {
>>> + device_type = "memory";
>>> + reg = <0x80000000 0x40000000>;
>>> + };
>>> +
>>> + chosen {
>>> + stdout-path = &uart5;
>>> + };
>>> +
>>> + aliases {
>>> + mmc0 = &emmc_slot0;
>>> + mmc1 = &sdhci_slot0;
>>> + mmc2 = &sdhci_slot1;
>>> + spi0 = &fmc;
>>> + spi1 = &spi1;
>>> + spi2 = &spi2;
>>> + ethernet0 = &mac0;
>>> + ethernet1 = &mac1;
>>> + ethernet2 = &mac2;
>>> + ethernet3 = &mac3;
>>> + };
>>> +
>>> + cpus {
>>> + cpu at 0 {
>>> + clock-frequency = <800000000>;
>>> + };
>>> + cpu at 1 {
>>> + clock-frequency = <800000000>;
>>> + };
>>> + };
>>> +};
>>> +
>>> +&uart5 {
>>> + u-boot,dm-pre-reloc;
>>> + status = "okay";
>>> +};
>>> +
>>> +&sdrammc {
>>> + clock-frequency = <400000000>;
>>> +};
>>> +
>>> +&wdt1 {
>>> + status = "okay";
>>> +};
>>> +
>>> +&wdt2 {
>>> + status = "okay";
>>> +};
>>> +
>>> +&wdt3 {
>>> + status = "okay";
>>> +};
>>> +
>>> +&mdio {
>>> + status = "okay";
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&pinctrl_mdio4_default>;
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> +};
>>> +
>>> +&mac2 {
>>> + status = "okay";
>>> + phy-mode = "rgmii";
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&pinctrl_rgmii3_default &pinctrl_mac3link_default>;
>>> + fixed-link {
>>> + speed = <1000>;
>>> + full-duplex;
>>> + };
>>> +};
>>> +
>>> +&fmc {
>>> + status = "okay";
>>> +
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&pinctrl_fmcquad_default>;
>>> +
>>> + flash at 0 {
>>> + compatible = "spi-flash", "sst,w25q256";
>>> + status = "okay";
>>> + spi-max-frequency = <50000000>;
>>> + spi-tx-bus-width = <2>;
>>> + spi-rx-bus-width = <2>;
>>> + };
>>> +
>>> + flash at 1 {
>>> + compatible = "spi-flash", "sst,w25q256";
>>> + status = "okay";
>>> + spi-max-frequency = <50000000>;
>>> + spi-tx-bus-width = <2>;
>>> + spi-rx-bus-width = <2>;
>>> + };
>>> +
>>> + flash at 2 {
>>> + compatible = "spi-flash", "sst,w25q256";
>>> + status = "okay";
>>> + spi-max-frequency = <50000000>;
>>> + spi-tx-bus-width = <2>;
>>> + spi-rx-bus-width = <2>;
>>> + };
>>> +};
>>> +
>>> +&spi1 {
>>> + status = "okay";
>>> +
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&pinctrl_spi1_default &pinctrl_spi1abr_default
>>> + &pinctrl_spi1cs1_default &pinctrl_spi1wp_default
>>> + &pinctrl_spi1wp_default &pinctrl_spi1quad_default>;
>>> +
>>> + flash at 0 {
>>> + compatible = "spi-flash", "sst,w25q256";
>>> + status = "okay";
>>> + spi-max-frequency = <50000000>;
>>> + spi-tx-bus-width = <4>;
>>> + spi-rx-bus-width = <4>;
>>> + };
>>> +
>>> + flash at 1 {
>>> + compatible = "spi-flash", "sst,w25q256";
>>> + status = "okay";
>>> + spi-max-frequency = <50000000>;
>>> + spi-tx-bus-width = <4>;
>>> + spi-rx-bus-width = <4>;
>>> + };
>>> +};
>>> +
>>> +&spi2 {
>>> + status = "okay";
>>> +
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&pinctrl_spi2_default &pinctrl_spi2cs1_default
>>> + &pinctrl_spi2cs2_default &pinctrl_spi2quad_default>;
>>> +
>>> + flash at 0 {
>>> + compatible = "spi-flash", "sst,w25q256";
>>> + status = "okay";
>>> + spi-max-frequency = <50000000>;
>>> + spi-tx-bus-width = <4>;
>>> + spi-rx-bus-width = <4>;
>>> + };
>>> +
>>> + flash at 1 {
>>> + compatible = "spi-flash", "sst,w25q256";
>>> + status = "okay";
>>> + spi-max-frequency = <50000000>;
>>> + spi-tx-bus-width = <4>;
>>> + spi-rx-bus-width = <4>;
>>> + };
>>> +
>>> + flash at 2 {
>>> + compatible = "spi-flash", "sst,w25q256";
>>> + status = "okay";
>>> + spi-max-frequency = <50000000>;
>>> + spi-tx-bus-width = <4>;
>>> + spi-rx-bus-width = <4>;
>>> + };
>>> +};
>>> +
>>> +&i2c4 {
>>> + status = "okay";
>>> +
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&pinctrl_i2c5_default>;
>>> +};
>>> +
>>> +&i2c5 {
>>> + status = "okay";
>>> +
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&pinctrl_i2c6_default>;
>>> +};
>>> +
>>> +&i2c6 {
>>> + status = "okay";
>>> +
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&pinctrl_i2c7_default>;
>>> +};
>>> +
>>> +&i2c7 {
>>> + status = "okay";
>>> +
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&pinctrl_i2c8_default>;
>>> +};
>>> +
>>> +&i2c8 {
>>> + status = "okay";
>>> +
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&pinctrl_i2c9_default>;
>>> +};
>>> +
>>> +&scu {
>>> + mac0-clk-delay = <0x10 0x0a
>>> + 0x10 0x10
>>> + 0x10 0x10>;
>>> + mac1-clk-delay = <0x10 0x0a
>>> + 0x10 0x10
>>> + 0x10 0x10>;
>>> + mac2-clk-delay = <0x08 0x04
>>> + 0x08 0x04
>>> + 0x08 0x04>;
>>> + mac3-clk-delay = <0x08 0x04
>>> + 0x08 0x04
>>> + 0x08 0x04>;
>>> +};
>>> +
>>> +&hace {
>>> + status = "okay";
>>> +};
>>
More information about the openbmc
mailing list