cannot ping serverip from u-boot.

[Johnathan Mantey]

On 10/26/21 10:53, Mahesh Kurapati wrote:
> Hi all,
> 
> I am using openbmc-2.9.0 on AST2500 BMC.  From the u-boot, I could not 
> ping to any external node be it on the same network, or a different 
> network.  I configured static ip 192.168.0.81 for my laptop and attached 
> wireshark to the same interface. I don’t see any ARP requests when I 
> issued ping command from BMC to the laptop.  I see that link status is 
> up from the debug prints, and also the MDIO status registers.  Don’t see 
> anything wrong.  Not sure what/where to look for to debug the issue 
> further. Appreciate any suggestions.  We are using Marvel Alaska 88 
> series Phy.  If this works, I want to tftpboot the board, and flash the 
> eMMC.  That is my goal.

Does your system have two NICs?

Is your network cable plugged into the NIC specified by the ethact 
U-Boot setting?

Have you tried changing the ethact line to point to the second NIC 
address (e.g. ethernet at 1e690000)?

> 
> ast# printenv
> 
> baudrate=115200
> 
> bootargs=console=ttyS4,115200n8 root=/dev/ram rw
> 
> bootcmd=bootm 20080000
> 
> bootdelay=2
> 
> bootfile=all.bin
> 
> eth1addr=c2:d1:29:f8:1b:e3
> 
> ethact=ethernet at 1e680000
> 
> ethaddr=be:f3:fa:8c:cd:e8
> 
> fdtcontroladdr=bcf82138
> 
> gatewayip=192.168.0.1
> 
> ipaddr=192.168.0.45
> 
> netmask=255.255.255.0
> 
> serverip=192.168.0.81
> 
> stderr=serial at 1e784000
> 
> stdin=serial at 1e784000
> 
> stdout=serial at 1e784000
> 
> verify=yes
> 
> ast#
> 
> ast# ping $serverip
> 
> Trying ethernet at 1e680000
> 
> ethernet at 1e680000: link up, 1000 Mbps full-duplex mac:c2:d1:29:f8:1b:e3
> 
> Using ethernet at 1e680000 device
> 
> ARP broadcast 1
> 
> ARP broadcast 2
> 
> ARP broadcast 3
> 
> ARP broadcast 4
> 
> ARP Retry count exceeded; starting again
> 
> ping failed; host 192.168.0.81 is not alive
> 
> ast#
> 
> ast# mdio read  1.0-60
> 
> Reading from bus eth1
> 
> PHY at address 1:
> 
> 1.0 - 0x1000
> 
> 1.1 - 0x796d  =èlink is up
> 
> 1.2 - 0x141
> 
> 1.3 - 0xdd4
> 
> 1.4 - 0x21e1
> 
> 1.5 - 0xc5e1
> 
> 1.6 - 0xd
> 
> 1.7 - 0x2001
> 
> 1.8 - 0x4a38
> 
> 1.9 - 0x300
> 
> 1.10 - 0x3800
> 
> 1.11 - 0x0
> 
> 1.12 - 0x0
> 
> 1.13 - 0x3
> 
> 1.14 - 0x0
> 
> 1.15 - 0x3000
> 
> 1.16 - 0x3070
> 
> 1.17 - 0xac08
> 
> 1.18 - 0x0
> 
> 1.19 - 0x0
> 
> 1.20 - 0x20
> 
> 1.21 - 0x0
> 
> 1.22 - 0x0
> 
> 1.23 - 0x0
> 
> 1.24 - 0x0
> 
> 1.25 - 0x0
> 
> 1.26 - 0x40
> 
> 1.27 - 0x0
> 
> 1.28 - 0x0
> 
> 1.29 - 0x0
> 
> 1.30 - 0x0
> 
> Thank you,
> 
> Mahesh
> 

-- 
Johnathan Mantey
Senior Software Engineer
*azad te**chnology partners*
Contributing to Technology Innovation since 1992
Phone: (503) 712-6764
Email: johnathanx.mantey at intel.com <mailto:johnathanx.mantey at intel.com>

-------------- next part --------------
A non-text attachment was scrubbed...
Name: OpenPGP_signature
Type: application/pgp-signature
Size: 495 bytes
Desc: OpenPGP digital signature
URL: <http://lists.ozlabs.org/pipermail/openbmc/attachments/20211026/9275e388/attachment.sig>