[PATCH v3 2/2] serial: 8250: Use BIT(x) for UART_{CAP,BUG}_*

[Jiri Slaby]

On 20. 05. 21, 4:13, Andrew Jeffery wrote:
> BIT(x) improves readability and safety with respect to shifts.
> 
> Signed-off-by: Andrew Jeffery <andrew at aj.id.au>

Reviewed-by: Jiri Slaby <jirislaby at kernel.org>

> ---
>   drivers/tty/serial/8250/8250.h | 33 +++++++++++++++++----------------
>   1 file changed, 17 insertions(+), 16 deletions(-)
> 
> diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
> index 34aa2714f3c9..6473361525d1 100644
> --- a/drivers/tty/serial/8250/8250.h
> +++ b/drivers/tty/serial/8250/8250.h
> @@ -7,6 +7,7 @@
>    *  Copyright (C) 2001 Russell King.
>    */
>   
> +#include <linux/bits.h>
>   #include <linux/serial_8250.h>
>   #include <linux/serial_reg.h>
>   #include <linux/dmaengine.h>
> @@ -70,25 +71,25 @@ struct serial8250_config {
>   	unsigned int	flags;
>   };
>   
> -#define UART_CAP_FIFO	(1 << 8)	/* UART has FIFO */
> -#define UART_CAP_EFR	(1 << 9)	/* UART has EFR */
> -#define UART_CAP_SLEEP	(1 << 10)	/* UART has IER sleep */
> -#define UART_CAP_AFE	(1 << 11)	/* MCR-based hw flow control */
> -#define UART_CAP_UUE	(1 << 12)	/* UART needs IER bit 6 set (Xscale) */
> -#define UART_CAP_RTOIE	(1 << 13)	/* UART needs IER bit 4 set (Xscale, Tegra) */
> -#define UART_CAP_HFIFO	(1 << 14)	/* UART has a "hidden" FIFO */
> -#define UART_CAP_RPM	(1 << 15)	/* Runtime PM is active while idle */
> -#define UART_CAP_IRDA	(1 << 16)	/* UART supports IrDA line discipline */
> -#define UART_CAP_MINI	(1 << 17)	/* Mini UART on BCM283X family lacks:
> +#define UART_CAP_FIFO	BIT(8)	/* UART has FIFO */
> +#define UART_CAP_EFR	BIT(9)	/* UART has EFR */
> +#define UART_CAP_SLEEP	BIT(10)	/* UART has IER sleep */
> +#define UART_CAP_AFE	BIT(11)	/* MCR-based hw flow control */
> +#define UART_CAP_UUE	BIT(12)	/* UART needs IER bit 6 set (Xscale) */
> +#define UART_CAP_RTOIE	BIT(13)	/* UART needs IER bit 4 set (Xscale, Tegra) */
> +#define UART_CAP_HFIFO	BIT(14)	/* UART has a "hidden" FIFO */
> +#define UART_CAP_RPM	BIT(15)	/* Runtime PM is active while idle */
> +#define UART_CAP_IRDA	BIT(16)	/* UART supports IrDA line discipline */
> +#define UART_CAP_MINI	BIT(17)	/* Mini UART on BCM283X family lacks:
>   					 * STOP PARITY EPAR SPAR WLEN5 WLEN6
>   					 */
>   
> -#define UART_BUG_QUOT	(1 << 0)	/* UART has buggy quot LSB */
> -#define UART_BUG_TXEN	(1 << 1)	/* UART has buggy TX IIR status */
> -#define UART_BUG_NOMSR	(1 << 2)	/* UART has buggy MSR status bits (Au1x00) */
> -#define UART_BUG_THRE	(1 << 3)	/* UART has buggy THRE reassertion */
> -#define UART_BUG_PARITY	(1 << 4)	/* UART mishandles parity if FIFO enabled */
> -#define UART_BUG_TXRACE	(1 << 5)	/* UART Tx fails to set remote DR */
> +#define UART_BUG_QUOT	BIT(0)	/* UART has buggy quot LSB */
> +#define UART_BUG_TXEN	BIT(1)	/* UART has buggy TX IIR status */
> +#define UART_BUG_NOMSR	BIT(2)	/* UART has buggy MSR status bits (Au1x00) */
> +#define UART_BUG_THRE	BIT(3)	/* UART has buggy THRE reassertion */
> +#define UART_BUG_PARITY	BIT(4)	/* UART mishandles parity if FIFO enabled */
> +#define UART_BUG_TXRACE	BIT(5)	/* UART Tx fails to set remote DR */
>   
>   
>   #ifdef CONFIG_SERIAL_8250_SHARE_IRQ
> 


-- 
js
suse labs