[PATCH v2 1/1] media: aspeed: fix clock handling logic

Hans Verkuil hverkuil-cisco at xs4all.nl
Thu Jan 7 21:06:01 AEDT 2021


Hi Stephen,

On 21/12/2020 23:32, Jae Hyun Yoo wrote:
> Video engine uses eclk and vclk for its clock sources and its reset
> control is coupled with eclk so the current clock enabling sequence works
> like below.
> 
>  Enable eclk
>  De-assert Video Engine reset
>  10ms delay
>  Enable vclk
> 
> It introduces improper reset on the Video Engine hardware and eventually
> the hardware generates unexpected DMA memory transfers that can corrupt
> memory region in random and sporadic patterns. This issue is observed
> very rarely on some specific AST2500 SoCs but it causes a critical
> kernel panic with making a various shape of signature so it's extremely
> hard to debug. Moreover, the issue is observed even when the video
> engine is not actively used because udevd turns on the video engine
> hardware for a short time to make a query in every boot.
> 
> To fix this issue, this commit changes the clock handling logic to make
> the reset de-assertion triggered after enabling both eclk and vclk. Also,
> it adds clk_unprepare call for a case when probe fails.
> 
> Fixes: d2b4387f3bdf ("media: platform: Add Aspeed Video Engine driver")
> Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo at linux.intel.com>
> Reviewed-by: Joel Stanley <joel at jms.id.au>
> Reviewed-by: Eddie James <eajames at linux.ibm.com>
> 
> clk: ast2600: fix reset settings for eclk and vclk
> 
> Video engine reset setting should be coupled with eclk to match it
> with the setting for previous Aspeed SoCs which is defined in
> clk-aspeed.c since all Aspeed SoCs are sharing a single video engine
> driver. Also, reset bit 6 is defined as 'Video Engine' reset in
> datasheet so it should be de-asserted when eclk is enabled. This
> commit fixes the setting.
> 
> Fixes: d3d04f6c330a ("clk: Add support for AST2600 SoC")
> Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo at linux.intel.com>
> Reviewed-by: Joel Stanley <joel at jms.id.au>

I think it makes sense to merge this via the media subsystem.

Can you Ack this patch?

Thanks!

	Hans

> ---
> Changes since v1:
> - Squashed two patches due to dependency.
> 
>  drivers/clk/clk-ast2600.c             | 4 ++--
>  drivers/media/platform/aspeed-video.c | 9 ++++++---
>  2 files changed, 8 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/clk/clk-ast2600.c b/drivers/clk/clk-ast2600.c
> index 177368cac6dd..882da16575d4 100644
> --- a/drivers/clk/clk-ast2600.c
> +++ b/drivers/clk/clk-ast2600.c
> @@ -60,10 +60,10 @@ static void __iomem *scu_g6_base;
>  static const struct aspeed_gate_data aspeed_g6_gates[] = {
>  	/*				    clk rst  name		parent	 flags */
>  	[ASPEED_CLK_GATE_MCLK]		= {  0, -1, "mclk-gate",	"mpll",	 CLK_IS_CRITICAL }, /* SDRAM */
> -	[ASPEED_CLK_GATE_ECLK]		= {  1, -1, "eclk-gate",	"eclk",	 0 },	/* Video Engine */
> +	[ASPEED_CLK_GATE_ECLK]		= {  1,  6, "eclk-gate",	"eclk",	 0 },	/* Video Engine */
>  	[ASPEED_CLK_GATE_GCLK]		= {  2,  7, "gclk-gate",	NULL,	 0 },	/* 2D engine */
>  	/* vclk parent - dclk/d1clk/hclk/mclk */
> -	[ASPEED_CLK_GATE_VCLK]		= {  3,  6, "vclk-gate",	NULL,	 0 },	/* Video Capture */
> +	[ASPEED_CLK_GATE_VCLK]		= {  3, -1, "vclk-gate",	NULL,	 0 },	/* Video Capture */
>  	[ASPEED_CLK_GATE_BCLK]		= {  4,  8, "bclk-gate",	"bclk",	 0 }, /* PCIe/PCI */
>  	/* From dpll */
>  	[ASPEED_CLK_GATE_DCLK]		= {  5, -1, "dclk-gate",	NULL,	 CLK_IS_CRITICAL }, /* DAC */
> diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c
> index c46a79eace98..db072ff2df70 100644
> --- a/drivers/media/platform/aspeed-video.c
> +++ b/drivers/media/platform/aspeed-video.c
> @@ -514,8 +514,8 @@ static void aspeed_video_off(struct aspeed_video *video)
>  	aspeed_video_write(video, VE_INTERRUPT_STATUS, 0xffffffff);
>  
>  	/* Turn off the relevant clocks */
> -	clk_disable(video->vclk);
>  	clk_disable(video->eclk);
> +	clk_disable(video->vclk);
>  
>  	clear_bit(VIDEO_CLOCKS_ON, &video->flags);
>  }
> @@ -526,8 +526,8 @@ static void aspeed_video_on(struct aspeed_video *video)
>  		return;
>  
>  	/* Turn on the relevant clocks */
> -	clk_enable(video->eclk);
>  	clk_enable(video->vclk);
> +	clk_enable(video->eclk);
>  
>  	set_bit(VIDEO_CLOCKS_ON, &video->flags);
>  }
> @@ -1719,8 +1719,11 @@ static int aspeed_video_probe(struct platform_device *pdev)
>  		return rc;
>  
>  	rc = aspeed_video_setup_video(video);
> -	if (rc)
> +	if (rc) {
> +		clk_unprepare(video->vclk);
> +		clk_unprepare(video->eclk);
>  		return rc;
> +	}
>  
>  	return 0;
>  }
> 



More information about the openbmc mailing list