[PATCH v2] hwmon: (pmbus/ibm-cffps) Fix write bits for LED control

[Guenter Roeck]

On Fri, Aug 06, 2021 at 10:51:31PM +0000, Brandon Wyman wrote:
> When doing a PMBus write for the LED control on the IBM Common Form
> Factor Power Supplies (ibm-cffps), the DAh command requires that bit 7
> be low and bit 6 be high in order to indicate that you are truly
> attempting to do a write.
> 
> Signed-off-by: Brandon Wyman <bjwyman at gmail.com>

Applied.

Thanks,
Guenter

> ---
> V1 -> V2: Use full name instead of initials in Signed-off-by line.
> ---
>  drivers/hwmon/pmbus/ibm-cffps.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/hwmon/pmbus/ibm-cffps.c b/drivers/hwmon/pmbus/ibm-cffps.c
> index 5668d8305b78..df712ce4b164 100644
> --- a/drivers/hwmon/pmbus/ibm-cffps.c
> +++ b/drivers/hwmon/pmbus/ibm-cffps.c
> @@ -50,9 +50,9 @@
>  #define CFFPS_MFR_VAUX_FAULT			BIT(6)
>  #define CFFPS_MFR_CURRENT_SHARE_WARNING		BIT(7)
>  
> -#define CFFPS_LED_BLINK				BIT(0)
> -#define CFFPS_LED_ON				BIT(1)
> -#define CFFPS_LED_OFF				BIT(2)
> +#define CFFPS_LED_BLINK				(BIT(0) | BIT(6))
> +#define CFFPS_LED_ON				(BIT(1) | BIT(6))
> +#define CFFPS_LED_OFF				(BIT(2) | BIT(6))
>  #define CFFPS_BLINK_RATE_MS			250
>  
>  enum {