[PATCH v2] hwmon: (pmbus/ibm-cffps) Fix write bits for LED control

Brandon Wyman bjwyman at gmail.com
Sat Aug 7 08:51:31 AEST 2021


From: "B. J. Wyman" <bjwyman at gmail.com>

When doing a PMBus write for the LED control on the IBM Common Form
Factor Power Supplies (ibm-cffps), the DAh command requires that bit 7
be low and bit 6 be high in order to indicate that you are truly
attempting to do a write.

Signed-off-by: Brandon Wyman <bjwyman at gmail.com>
---
V1 -> V2: Use full name instead of initials in Signed-off-by line.
---
 drivers/hwmon/pmbus/ibm-cffps.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/hwmon/pmbus/ibm-cffps.c b/drivers/hwmon/pmbus/ibm-cffps.c
index 5668d8305b78..df712ce4b164 100644
--- a/drivers/hwmon/pmbus/ibm-cffps.c
+++ b/drivers/hwmon/pmbus/ibm-cffps.c
@@ -50,9 +50,9 @@
 #define CFFPS_MFR_VAUX_FAULT			BIT(6)
 #define CFFPS_MFR_CURRENT_SHARE_WARNING		BIT(7)
 
-#define CFFPS_LED_BLINK				BIT(0)
-#define CFFPS_LED_ON				BIT(1)
-#define CFFPS_LED_OFF				BIT(2)
+#define CFFPS_LED_BLINK				(BIT(0) | BIT(6))
+#define CFFPS_LED_ON				(BIT(1) | BIT(6))
+#define CFFPS_LED_OFF				(BIT(2) | BIT(6))
 #define CFFPS_BLINK_RATE_MS			250
 
 enum {
-- 
2.25.1



More information about the openbmc mailing list