[PATCH v1] i2c: npcm7xx: Support changing bus speed using debugfs.

[Tali Perry]

On Wed, Sep 30, 2020 at 12:31 PM Andy Shevchenko
<andriy.shevchenko at linux.intel.com> wrote:
>
> On Wed, Sep 30, 2020 at 10:13:42AM +0300, Tali Perry wrote:
> > Systems that can dinamically add and remove slave devices
>
> dynamically
>
> > often need to change the bus speed in runtime.
>
> > This patch exposes the bus frequency to the user.
>
> Expose the bus frequency to the user.
>
> > This feature can also be used for test automation.
>
> In general I think that DT overlays or so should be user rather than this.
> If we allow to change bus speed settings for debugging purposes it might make
> sense to do this on framework level for all drivers which support that (via
> additional callback or so).

Do you mean adding something like this:

struct i2c_algorithm {
/*
* If an adapter algorithm can't do I2C-level access, set master_xfer
* to NULL. If an adapter algorithm can do SMBus access, set
* smbus_xfer. If set to NULL, the SMBus protocol is simulated
* using common I2C messages.
*
* master_xfer should return the number of messages successfully
* processed, or a negative value on error
*/
int (*master_xfer)(struct i2c_adapter *adap, struct i2c_msg *msgs,
  int num);
....
int (*set_speed)(struct i2c_adapter *adap, unsigned int speed);
....
/* To determine what the adapter supports */
u32 (*functionality)(struct i2c_adapter *adap);

...
};

And expose this feature in functionality?


>
> > Fixes: 56a1485b102e (i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver)
> > Signed-off-by: Tali Perry <tali.perry1 at gmail.com>
> > ---
> >  drivers/i2c/busses/i2c-npcm7xx.c | 36 ++++++++++++++++++++++++++++++++
> >  1 file changed, 36 insertions(+)
> >
> > diff --git a/drivers/i2c/busses/i2c-npcm7xx.c b/drivers/i2c/busses/i2c-npcm7xx.c
> > index 2ad166355ec9..44e2340c1893 100644
> > --- a/drivers/i2c/busses/i2c-npcm7xx.c
> > +++ b/drivers/i2c/busses/i2c-npcm7xx.c
> > @@ -2208,6 +2208,41 @@ static const struct i2c_algorithm npcm_i2c_algo = {
> >  /* i2c debugfs directory: used to keep health monitor of i2c devices */
> >  static struct dentry *npcm_i2c_debugfs_dir;
> >
> > +static int i2c_speed_get(void *data, u64 *val)
> > +{
> > +     struct npcm_i2c *bus = data;
> > +
> > +     *val = (u64)bus->bus_freq;
> > +     return 0;
> > +}
> > +
> > +static int i2c_speed_set(void *data, u64 val)
> > +{
> > +     struct npcm_i2c *bus = data;
> > +     int ret;
> > +
> > +     if (val < (u64)I2C_FREQ_MIN_HZ || val > (u64)I2C_FREQ_MAX_HZ)
> > +             return -EINVAL;
> > +
> > +     if (val == (u64)bus->bus_freq)
> > +             return 0;
> > +
> > +     i2c_lock_bus(&bus->adap, I2C_LOCK_ROOT_ADAPTER);
> > +
> > +     npcm_i2c_int_enable(bus, false);
> > +
> > +     ret = npcm_i2c_init_module(bus, I2C_MASTER, (u32)val);
> > +
> > +     i2c_unlock_bus(&bus->adap, I2C_LOCK_ROOT_ADAPTER);
>
> While all these explicit castings?
>
> > +
> > +     if (ret)
> > +             return -EAGAIN;
> > +
> > +     return 0;
> > +}
>
> > +
>
> No need to have this blank line
>
> > +DEFINE_DEBUGFS_ATTRIBUTE(i2c_clock_ops, i2c_speed_get, i2c_speed_set, "%lld\n");
> > +
> >  static void npcm_i2c_init_debugfs(struct platform_device *pdev,
> >                                 struct npcm_i2c *bus)
> >  {
> > @@ -2223,6 +2258,7 @@ static void npcm_i2c_init_debugfs(struct platform_device *pdev,
> >       debugfs_create_u64("rec_succ_cnt", 0444, d, &bus->rec_succ_cnt);
> >       debugfs_create_u64("rec_fail_cnt", 0444, d, &bus->rec_fail_cnt);
> >       debugfs_create_u64("timeout_cnt", 0444, d, &bus->timeout_cnt);
> > +     debugfs_create_file("i2c_speed", 0644, d, bus, &i2c_clock_ops);
> >
> >       bus->debugfs = d;
> >  }
>
> --
> With Best Regards,
> Andy Shevchenko
>
>