[PATCH 2/2] rainier: Add LEDs that are controlled by ASPEED

Eddie James eajames at linux.ibm.com
Tue Jul 28 07:20:14 AEST 2020


On 7/27/20 7:40 AM, vishwanatha subbanna wrote:
> These are the LEDs that have direct GPIO connection from ASPEED


Reviewed-by: Eddie James <eajames at linux.ibm.com>


>
> Signed-off-by: Vishwanatha Subbanna <vishwa at linux.vnet.ibm.com>
> ---
> arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts | 24 ++++++++++++++++++++++--
> 1 file changed, 22 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
> index ecbce50..dc68c49 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
> @@ -72,6 +72,26 @@
> 	leds {
> 		compatible = "gpio-leds";
>
> +		/* BMC Card fault LED at the back */
> +		bmc-ingraham0 {
> +			gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>;
> +		};
> +
> +		/* Enclosure ID LED at the back */
> +		rear-enc-id0 {
> +			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
> +		};
> +
> +		/* Enclosure fault LED at the back */
> +		rear-enc-fault0 {
> +			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
> +		};
> +
> +		/* PCIE slot power LED */
> +		pcieslot-power {
> +			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>;
> +		};
> +
> 		/* System ID LED that is at front on Op Panel */
> 		front-sys-id0 {
> 			retain-state-shutdown;
> @@ -112,7 +132,7 @@
> 	/*E0-E7*/	"","","","","","","","",
> 	/*F0-F7*/	"","","","","","","","",
> 	/*G0-G7*/	"","","","","","","","",
> -	/*H0-H7*/	"","","","","","","","",
> +	/*H0-H7*/	"","bmc-ingraham0","rear-enc-id0","rear-enc-fault0","","","","",
> 	/*I0-I7*/	"","","","","","","","",
> 	/*J0-J7*/	"","","","","","","","",
> 	/*K0-K7*/	"","","","","","","","",
> @@ -120,7 +140,7 @@
> 	/*M0-M7*/	"","","","","","","","",
> 	/*N0-N7*/	"","","","","","","","",
> 	/*O0-O7*/	"","","","","","","","",
> -	/*P0-P7*/	"","","","","","","","",
> +	/*P0-P7*/	"","","","","pcieslot-power","","","",
> 	/*Q0-Q7*/	"cfam-reset","","","","","","","",
> 	/*R0-R7*/	"","","","","","","","",
> 	/*S0-S7*/	"presence-ps0","presence-ps1","presence-ps2","presence-ps3",


More information about the openbmc mailing list