[PATCH v2 2/2] iio: adc: modify NPCM reset support

Tomer Maimon tmaimon77 at gmail.com
Sun Feb 9 19:22:22 AEDT 2020


Great!

Thanks a lot Jonathan

On Thu, 6 Feb 2020 at 13:40, Jonathan Cameron <jic23 at kernel.org> wrote:

> On Mon,  3 Feb 2020 17:09:17 +0200
> Tomer Maimon <tmaimon77 at gmail.com> wrote:
>
> > Modify NPCM ADC reset support from
> > direct register access to reset controller support.
> >
> > please make sure to modify NPCM adc device tree
> > parameters as described at nuvoton,npcm-adc.txt
> > document for using this change.
> >
> > Signed-off-by: Tomer Maimon <tmaimon77 at gmail.com>
>
> Applied.  I added a note for anyone browsing the tree in future
> to say that we know this is a breaking change, but in this case
> close ecosystem etc so it's fine..
>
> I don't want others to point at your patch when I tell them no
> for similar changes in more generic parts!
>
> Thanks,
>
> Jonathan
>
> > ---
> >  drivers/iio/adc/npcm_adc.c | 30 +++++++++---------------------
> >  1 file changed, 9 insertions(+), 21 deletions(-)
> >
> > diff --git a/drivers/iio/adc/npcm_adc.c b/drivers/iio/adc/npcm_adc.c
> > index a6170a37ebe8..83bad2d5575d 100644
> > --- a/drivers/iio/adc/npcm_adc.c
> > +++ b/drivers/iio/adc/npcm_adc.c
> > @@ -14,6 +14,7 @@
> >  #include <linux/regulator/consumer.h>
> >  #include <linux/spinlock.h>
> >  #include <linux/uaccess.h>
> > +#include <linux/reset.h>
> >
> >  struct npcm_adc {
> >       bool int_status;
> > @@ -23,13 +24,9 @@ struct npcm_adc {
> >       struct clk *adc_clk;
> >       wait_queue_head_t wq;
> >       struct regulator *vref;
> > -     struct regmap *rst_regmap;
> > +     struct reset_control *reset;
> >  };
> >
> > -/* NPCM7xx reset module */
> > -#define NPCM7XX_IPSRST1_OFFSET               0x020
> > -#define NPCM7XX_IPSRST1_ADC_RST              BIT(27)
> > -
> >  /* ADC registers */
> >  #define NPCM_ADCCON   0x00
> >  #define NPCM_ADCDATA  0x04
> > @@ -106,13 +103,11 @@ static int npcm_adc_read(struct npcm_adc *info,
> int *val, u8 channel)
> >                                              msecs_to_jiffies(10));
> >       if (ret == 0) {
> >               regtemp = ioread32(info->regs + NPCM_ADCCON);
> > -             if ((regtemp & NPCM_ADCCON_ADC_CONV) && info->rst_regmap) {
> > +             if (regtemp & NPCM_ADCCON_ADC_CONV) {
> >                       /* if conversion failed - reset ADC module */
> > -                     regmap_write(info->rst_regmap,
> NPCM7XX_IPSRST1_OFFSET,
> > -                                  NPCM7XX_IPSRST1_ADC_RST);
> > +                     reset_control_assert(info->reset);
> >                       msleep(100);
> > -                     regmap_write(info->rst_regmap,
> NPCM7XX_IPSRST1_OFFSET,
> > -                                  0x0);
> > +                     reset_control_deassert(info->reset);
> >                       msleep(100);
> >
> >                       /* Enable ADC and start conversion module */
> > @@ -186,7 +181,6 @@ static int npcm_adc_probe(struct platform_device
> *pdev)
> >       struct npcm_adc *info;
> >       struct iio_dev *indio_dev;
> >       struct device *dev = &pdev->dev;
> > -     struct device_node *np = pdev->dev.of_node;
> >
> >       indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info));
> >       if (!indio_dev)
> > @@ -199,6 +193,10 @@ static int npcm_adc_probe(struct platform_device
> *pdev)
> >       if (IS_ERR(info->regs))
> >               return PTR_ERR(info->regs);
> >
> > +     info->reset = devm_reset_control_get(&pdev->dev, NULL);
> > +     if (IS_ERR(info->reset))
> > +             return PTR_ERR(info->reset);
> > +
> >       info->adc_clk = devm_clk_get(&pdev->dev, NULL);
> >       if (IS_ERR(info->adc_clk)) {
> >               dev_warn(&pdev->dev, "ADC clock failed: can't read clk\n");
> > @@ -211,16 +209,6 @@ static int npcm_adc_probe(struct platform_device
> *pdev)
> >       div = div >> NPCM_ADCCON_DIV_SHIFT;
> >       info->adc_sample_hz = clk_get_rate(info->adc_clk) / ((div + 1) *
> 2);
> >
> > -     if (of_device_is_compatible(np, "nuvoton,npcm750-adc")) {
> > -             info->rst_regmap = syscon_regmap_lookup_by_compatible
> > -                     ("nuvoton,npcm750-rst");
> > -             if (IS_ERR(info->rst_regmap)) {
> > -                     dev_err(&pdev->dev, "Failed to find
> nuvoton,npcm750-rst\n");
> > -                     ret = PTR_ERR(info->rst_regmap);
> > -                     goto err_disable_clk;
> > -             }
> > -     }
> > -
> >       irq = platform_get_irq(pdev, 0);
> >       if (irq <= 0) {
> >               ret = -EINVAL;
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/openbmc/attachments/20200209/00587737/attachment.htm>


More information about the openbmc mailing list