Redfish Mapped Commands

[Jayashree D]

Hi All,

I am about to test redfish commands for the following features.
Can anyone point me the related redfish commands for those features?

1. We are using X86 power control, is there any compatible commands in redfish to test?
2. FRU information.
3. obmc-console-client to connect the host.
4. To set, start and stop the fan speed controller.
5. Host Logger.
6. LED
7. BIOS Upgrade
8. Settings Manager

Thanks,
Regards,
Jayashree
::DISCLAIMER::
________________________________
The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents (with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates. Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of authorized representative of HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any email and/or attachments, please check them for viruses and other defects.
________________________________
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/openbmc/attachments/20200804/fca0d6d4/attachment-0001.htm>