NCSI eth0 (ftgmac100): transmit queue 0 timed out error

Andrew Jeffery andrew at aj.id.au
Mon Nov 25 09:00:45 AEDT 2019



On Sat, 23 Nov 2019, at 18:50, Евгений wrote:
> Hello Andrew,
> 
> It turned out that the i210 firmware was not loaded by the manufacturer. 
> Maybe this is normal, but how then did they test the board?

No idea. Glad you solved it. The pinmux issue is a bit disconcerting still.

Andrew


More information about the openbmc mailing list