[PATCH linux dev-5.3 2/4] clocksource: fttmr010: Parametrise shutdown
Cédric Le Goater
clg at kaod.org
Thu Nov 7 01:32:16 AEDT 2019
On 06/11/2019 10:17, Joel Stanley wrote:
> In preparation for supporting the ast2600 which uses a different method
> to clear bits in the control register, use a callback for performing the
> shutdown sequence.
>
> Signed-off-by: Joel Stanley <joel at jms.id.au>
Reviewed-by: Cédric Le Goater <clg at kaod.org>
> ---
> drivers/clocksource/timer-fttmr010.c | 19 ++++++++-----------
> 1 file changed, 8 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/clocksource/timer-fttmr010.c b/drivers/clocksource/timer-fttmr010.c
> index fadff7915dd9..c2d30eb9dc72 100644
> --- a/drivers/clocksource/timer-fttmr010.c
> +++ b/drivers/clocksource/timer-fttmr010.c
> @@ -97,6 +97,7 @@ struct fttmr010 {
> bool is_aspeed;
> u32 t1_enable_val;
> struct clock_event_device clkevt;
> + int (*timer_shutdown)(struct clock_event_device *evt);
> #ifdef CONFIG_ARM
> struct delay_timer delay_timer;
> #endif
> @@ -140,9 +141,7 @@ static int fttmr010_timer_set_next_event(unsigned long cycles,
> u32 cr;
>
> /* Stop */
> - cr = readl(fttmr010->base + TIMER_CR);
> - cr &= ~fttmr010->t1_enable_val;
> - writel(cr, fttmr010->base + TIMER_CR);
> + fttmr010->timer_shutdown(evt);
>
> if (fttmr010->is_aspeed) {
> /*
> @@ -183,9 +182,7 @@ static int fttmr010_timer_set_oneshot(struct clock_event_device *evt)
> u32 cr;
>
> /* Stop */
> - cr = readl(fttmr010->base + TIMER_CR);
> - cr &= ~fttmr010->t1_enable_val;
> - writel(cr, fttmr010->base + TIMER_CR);
> + fttmr010->timer_shutdown(evt);
>
> /* Setup counter start from 0 or ~0 */
> writel(0, fttmr010->base + TIMER1_COUNT);
> @@ -211,9 +208,7 @@ static int fttmr010_timer_set_periodic(struct clock_event_device *evt)
> u32 cr;
>
> /* Stop */
> - cr = readl(fttmr010->base + TIMER_CR);
> - cr &= ~fttmr010->t1_enable_val;
> - writel(cr, fttmr010->base + TIMER_CR);
> + fttmr010->timer_shutdown(evt);
>
> /* Setup timer to fire at 1/HZ intervals. */
> if (fttmr010->is_aspeed) {
> @@ -350,6 +345,8 @@ static int __init fttmr010_common_init(struct device_node *np, bool is_aspeed)
> fttmr010->tick_rate);
> }
>
> + fttmr010->timer_shutdown = fttmr010_timer_shutdown;
> +
> /*
> * Setup clockevent timer (interrupt-driven) on timer 1.
> */
> @@ -370,10 +367,10 @@ static int __init fttmr010_common_init(struct device_node *np, bool is_aspeed)
> fttmr010->clkevt.features = CLOCK_EVT_FEAT_PERIODIC |
> CLOCK_EVT_FEAT_ONESHOT;
> fttmr010->clkevt.set_next_event = fttmr010_timer_set_next_event;
> - fttmr010->clkevt.set_state_shutdown = fttmr010_timer_shutdown;
> + fttmr010->clkevt.set_state_shutdown = fttmr010->timer_shutdown;
> fttmr010->clkevt.set_state_periodic = fttmr010_timer_set_periodic;
> fttmr010->clkevt.set_state_oneshot = fttmr010_timer_set_oneshot;
> - fttmr010->clkevt.tick_resume = fttmr010_timer_shutdown;
> + fttmr010->clkevt.tick_resume = fttmr010->timer_shutdown;
> fttmr010->clkevt.cpumask = cpumask_of(0);
> fttmr010->clkevt.irq = irq;
> clockevents_config_and_register(&fttmr010->clkevt,
>
More information about the openbmc
mailing list