[PATCH dev-4.19 v2] EDAC: Add Nuvoton NPCM7xx EDAC driver
George Hung
george.hung at quantatw.com
Thu Mar 21 00:02:47 AEDT 2019
Add support for the Nuvoton NPCM7xx SoC EDAC driver
Signed-off-by: George Hung <george.hung at quantatw.com>
---
v1->v2:
* Change CONFIG_EDAC_NUVOTON as CONFIG_EDAC_NPCM7XX
* Change ecc_synd to ecc_id (typo)
* Move 'enable interrupt' to the last stage of irq function
* Add the bit definition for ECC interrupt bitwise value
drivers/edac/Kconfig | 7 +
drivers/edac/Makefile | 2 +
drivers/edac/npcm7xx_edac.c | 424 ++++++++++++++++++++++++++++++++++++
3 files changed, 433 insertions(+)
create mode 100644 drivers/edac/npcm7xx_edac.c
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index 57304b2e989f..e132f5616583 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -460,4 +460,11 @@ config EDAC_TI
Support for error detection and correction on the
TI SoCs.
+config EDAC_NPCM7XX
+ tristate "Nuvoton NPCM7xx DDR Memory Controller"
+ depends on ARCH_NPCM7XX
+ help
+ Support for error detection and correction on the
+ Nuvoton NPCM7xx DDR memory controller.
+
endif # EDAC
diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
index 02b43a7d8c3e..1236f490bec7 100644
--- a/drivers/edac/Makefile
+++ b/drivers/edac/Makefile
@@ -77,3 +77,5 @@ obj-$(CONFIG_EDAC_ALTERA) += altera_edac.o
obj-$(CONFIG_EDAC_SYNOPSYS) += synopsys_edac.o
obj-$(CONFIG_EDAC_XGENE) += xgene_edac.o
obj-$(CONFIG_EDAC_TI) += ti_edac.o
+
+obj-$(CONFIG_EDAC_NPCM7XX) += npcm7xx_edac.o
diff --git a/drivers/edac/npcm7xx_edac.c b/drivers/edac/npcm7xx_edac.c
new file mode 100644
index 000000000000..bab25a4308be
--- /dev/null
+++ b/drivers/edac/npcm7xx_edac.c
@@ -0,0 +1,424 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019 Quanta Computer lnc.
+ */
+
+#include <linux/edac.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+
+#include "edac_module.h"
+
+#define ECC_ENABLE BIT(24)
+#define ECC_EN_INT_MASK 0x7fffff87
+
+#define INT_STATUS_ADDR 116
+#define INT_ACK_ADDR 117
+#define INT_MASK_ADDR 118
+
+#define ECC_EN_ADDR 93
+#define ECC_C_ADDR_ADDR 98
+#define ECC_C_DATA_ADDR 100
+#define ECC_C_ID_ADDR 101
+#define ECC_C_SYND_ADDR 99
+#define ECC_U_ADDR_ADDR 95
+#define ECC_U_DATA_ADDR 97
+#define ECC_U_ID_ADDR 101
+#define ECC_U_SYND_ADDR 96
+
+#define ECC_ERROR -1
+#define EDAC_MSG_SIZE 256
+#define EDAC_MOD_NAME "npcm7xx-edac"
+
+struct ecc_error_signature_info {
+ u32 ecc_addr;
+ u32 ecc_data;
+ u32 ecc_id;
+ u32 ecc_synd;
+};
+
+struct npcm7xx_ecc_int_status {
+ u32 int_mask;
+ u32 int_status;
+ u32 int_ack;
+ u32 ce_cnt;
+ u32 ue_cnt;
+ struct ecc_error_signature_info ceinfo;
+ struct ecc_error_signature_info ueinfo;
+};
+
+struct npcm7xx_edac_priv {
+ void __iomem *baseaddr;
+ char message[EDAC_MSG_SIZE];
+ struct npcm7xx_ecc_int_status stat;
+};
+
+/**
+ * npcm7xx_edac_get_ecc_syndrom - Get the current ecc error info
+ * @base: Pointer to the base address of the ddr memory controller
+ * @p: Pointer to the Nuvoton ecc status structure
+ *
+ * Determines there is any ecc error or not
+ *
+ * Return: ECC detection status
+ */
+static int npcm7xx_edac_get_ecc_syndrom(void __iomem *base,
+ struct npcm7xx_ecc_int_status *p)
+{
+ int status = 0;
+ u32 int_status = 0;
+
+ int_status = readl(base + 4*INT_STATUS_ADDR);
+ writel(int_status, base + 4*INT_ACK_ADDR);
+ edac_dbg(3, "int_status: %#08x\n", int_status);
+
+ if ((int_status & (1 << 6)) == (1 << 6)) {
+ edac_dbg(3, "6-Mult uncorrectable detected.\n");
+ p->ue_cnt++;
+ status = ECC_ERROR;
+ }
+
+ if ((int_status & (1 << 5)) == (1 << 5)) {
+ edac_dbg(3, "5-An uncorrectable detected\n");
+ p->ue_cnt++;
+ status = ECC_ERROR;
+ }
+
+ if ((int_status & (1 << 4)) == (1 << 4)) {
+ edac_dbg(3, "4-mult correctable detected.\n");
+ p->ce_cnt++;
+ status = ECC_ERROR;
+ }
+
+ if ((int_status & (1 << 3)) == (1 << 3)) {
+ edac_dbg(3, "3-A correctable detected.\n");
+ p->ce_cnt++;
+ status = ECC_ERROR;
+ }
+
+ if (status == ECC_ERROR) {
+ u32 ecc_id;
+
+ p->ceinfo.ecc_addr = readl(base + 4*ECC_C_ADDR_ADDR);
+ p->ceinfo.ecc_data = readl(base + 4*ECC_C_DATA_ADDR);
+ p->ceinfo.ecc_synd = readl(base + 4*ECC_C_SYND_ADDR);
+
+ p->ueinfo.ecc_addr = readl(base + 4*ECC_U_ADDR_ADDR);
+ p->ueinfo.ecc_data = readl(base + 4*ECC_U_DATA_ADDR);
+ p->ueinfo.ecc_synd = readl(base + 4*ECC_U_SYND_ADDR);
+
+ /* ECC_C_ID_ADDR has same value as ECC_U_ID_ADDR */
+ ecc_id = readl(base + 4*ECC_C_ID_ADDR);
+ p->ueinfo.ecc_id = ecc_id & 0xffff;
+ p->ceinfo.ecc_id = ecc_id >> 16;
+ }
+
+ return status;
+}
+
+/**
+ * npcm7xx_edac_handle_error - Handle controller error types CE and UE
+ * @mci: Pointer to the edac memory controller instance
+ * @p: Pointer to the Nuvoton ecc status structure
+ *
+ * Handles the controller ECC correctable and un correctable error.
+ */
+static void npcm7xx_edac_handle_error(struct mem_ctl_info *mci,
+ struct npcm7xx_ecc_int_status *p)
+{
+ struct npcm7xx_edac_priv *priv = mci->pvt_info;
+ u32 page, offset;
+
+ if (p->ce_cnt) {
+ snprintf(priv->message, EDAC_MSG_SIZE,
+ "DDR ECC: synd=%#08x addr=%#08x data=%#08x source_id=%#08x ",
+ p->ceinfo.ecc_synd, p->ceinfo.ecc_addr,
+ p->ceinfo.ecc_data, p->ceinfo.ecc_id);
+
+ page = p->ceinfo.ecc_addr >> PAGE_SHIFT;
+ offset = p->ceinfo.ecc_addr & ~PAGE_MASK;
+ edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci,
+ p->ce_cnt, page, offset,
+ p->ceinfo.ecc_synd,
+ 0, 0, -1,
+ priv->message, "");
+ }
+
+ if (p->ue_cnt) {
+ snprintf(priv->message, EDAC_MSG_SIZE,
+ "DDR ECC: synd=%#08x addr=%#08x data=%#08x source_id=%#08x ",
+ p->ueinfo.ecc_synd, p->ueinfo.ecc_addr,
+ p->ueinfo.ecc_data, p->ueinfo.ecc_id);
+
+ page = p->ueinfo.ecc_addr >> PAGE_SHIFT;
+ offset = p->ueinfo.ecc_addr & ~PAGE_MASK;
+ edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci,
+ p->ue_cnt, page, offset,
+ p->ueinfo.ecc_synd,
+ 0, 0, -1,
+ priv->message, "");
+ }
+
+ memset(p, 0, sizeof(*p));
+}
+
+/**
+ * npcm7xx_edac_check - Check controller for ECC errors
+ * @mci: Pointer to the edac memory controller instance
+ *
+ * This routine is used to check and post ECC errors and is called by
+ * this driver's CE and UE interrupt handler.
+ */
+static void npcm7xx_edac_check(struct mem_ctl_info *mci)
+{
+ struct npcm7xx_edac_priv *priv = mci->pvt_info;
+ int status = 0;
+
+ status = npcm7xx_edac_get_ecc_syndrom(priv->baseaddr, &priv->stat);
+ if (status != ECC_ERROR)
+ return;
+
+ npcm7xx_edac_handle_error(mci, &priv->stat);
+}
+
+/**
+ * npcm7xx_edac_isr - CE/UE interrupt service routine
+ * @irq: The virtual interrupt number being serviced.
+ * @dev_id: A pointer to the EDAC memory controller instance
+ * associated with the interrupt being handled.
+ *
+ * This routine implements the interrupt handler for both correctable
+ * (CE) and uncorrectable (UE) ECC errors for the Nuvoton Cadence DDR
+ * controller. It simply calls through to the routine used to check,
+ * report and clear the ECC status.
+ *
+ * Unconditionally returns IRQ_HANDLED.
+ */
+static irqreturn_t npcm7xx_edac_isr(int irq, void *dev_id)
+{
+ struct mem_ctl_info *mci = dev_id;
+ int npcm_edac_report = 0;
+
+ npcm_edac_report = edac_get_report_status();
+ if (npcm_edac_report != EDAC_REPORTING_DISABLED)
+ npcm7xx_edac_check(mci);
+
+ return IRQ_HANDLED;
+}
+
+static int npcm7xx_edac_register_irq(struct mem_ctl_info *mci,
+ struct platform_device *pdev)
+{
+ int status = 0;
+ int mc_irq;
+ struct npcm7xx_edac_priv *priv = mci->pvt_info;
+
+ mc_irq = platform_get_irq(pdev, 0);
+
+ if (!mc_irq) {
+ edac_printk(KERN_ERR, EDAC_MC, "Unable to map interrupts.\n");
+ status = -ENODEV;
+ goto fail;
+ }
+
+ status = devm_request_irq(&pdev->dev, mc_irq, npcm7xx_edac_isr, 0,
+ "npcm-memory-controller", mci);
+
+ if (status < 0) {
+ edac_printk(KERN_ERR, EDAC_MC,
+ "Unable to request irq %d for ECC",
+ mc_irq);
+ status = -ENODEV;
+ goto fail;
+ }
+
+ /* Only enable MC interrupts with ECC - clear int_mask[6:3] */
+ writel(ECC_EN_INT_MASK, priv->baseaddr + 4*INT_MASK_ADDR);
+
+ return 0;
+
+fail:
+ return status;
+}
+
+static const struct of_device_id npcm7xx_edac_of_match[] = {
+ { .compatible = "nuvoton,npcm7xx-sdram-edac"},
+ { /* end of table */ }
+};
+
+MODULE_DEVICE_TABLE(of, npcm7xx_edac_of_match);
+
+/**
+ * npcm7xx_edac_mc_init - Initialize driver instance
+ * @mci: Pointer to the edac memory controller instance
+ * @pdev: Pointer to the platform_device struct
+ *
+ * Performs initialization of the EDAC memory controller instance and
+ * related driver-private data associated with the memory controller the
+ * instance is bound to.
+ *
+ * Returns 0 if OK; otherwise, < 0 on error.
+ */
+static int npcm7xx_edac_mc_init(struct mem_ctl_info *mci,
+ struct platform_device *pdev)
+{
+ const struct of_device_id *id;
+
+ id = of_match_device(npcm7xx_edac_of_match, &pdev->dev);
+ if (!id)
+ return -ENODEV;
+
+ /* Initialize controller capabilities and configuration */
+ mci->mtype_cap = MEM_FLAG_DDR4;
+ mci->edac_ctl_cap = EDAC_FLAG_SECDED;
+ mci->edac_cap = EDAC_FLAG_SECDED;
+ mci->scrub_cap = SCRUB_FLAG_HW_SRC;
+ mci->scrub_mode = SCRUB_HW_SRC;
+ mci->ctl_name = id->compatible;
+ mci->dev_name = dev_name(&pdev->dev);
+ mci->mod_name = EDAC_MOD_NAME;
+
+ edac_op_state = EDAC_OPSTATE_INT;
+
+ return 0;
+}
+
+/**
+ * npcm7xx_edac_get_eccstate - Return the controller ecc enable/disable status
+ * @base: Pointer to the ddr memory controller base address
+ *
+ * Get the ECC enable/disable status for the controller
+ *
+ * Return: a ecc status boolean i.e true/false - enabled/disabled.
+ */
+static bool npcm7xx_edac_get_eccstate(void __iomem *base)
+{
+ u32 ecc_en;
+ bool state = false;
+
+ ecc_en = readl(base + 4*ECC_EN_ADDR);
+ if (ecc_en & ECC_ENABLE) {
+ edac_printk(KERN_INFO, EDAC_MC, "ECC reporting and correcting on. ");
+ state = true;
+ }
+
+ return state;
+}
+
+/**
+ * npcm7xx_edac_mc_probe - Check controller and bind driver
+ * @pdev: Pointer to the platform_device struct
+ *
+ * Probes a specific controller instance for binding with the driver.
+ *
+ * Return: 0 if the controller instance was successfully bound to the
+ * driver; otherwise, < 0 on error.
+ */
+static int npcm7xx_edac_mc_probe(struct platform_device *pdev)
+{
+ struct mem_ctl_info *mci;
+ struct edac_mc_layer layers[1];
+ struct npcm7xx_edac_priv *priv;
+ struct resource *res;
+ void __iomem *baseaddr;
+ int rc;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ baseaddr = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(baseaddr)) {
+ edac_printk(KERN_ERR, EDAC_MOD_NAME,
+ "DDR controller regs not defined\n");
+ return PTR_ERR(baseaddr);
+ }
+
+ /*
+ * Check if ECC is enabled.
+ * If not, there is no useful monitoring that can be done
+ * for this controller.
+ */
+ if (!npcm7xx_edac_get_eccstate(baseaddr)) {
+ edac_printk(KERN_INFO, EDAC_MC, "ECC disabled\n");
+ return -ENXIO;
+ }
+
+ /*
+ * Allocate an EDA controller instance and perform the appropriate
+ * initialization.
+ */
+ layers[0].type = EDAC_MC_LAYER_ALL_MEM;
+ layers[0].size = 1;
+
+ mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers,
+ sizeof(struct npcm7xx_edac_priv));
+ if (!mci) {
+ edac_printk(KERN_ERR, EDAC_MC,
+ "Failed memory allocation for mc instance\n");
+ return -ENOMEM;
+ }
+
+ mci->pdev = &pdev->dev;
+ priv = mci->pvt_info;
+ priv->baseaddr = baseaddr;
+ platform_set_drvdata(pdev, mci);
+
+ rc = npcm7xx_edac_mc_init(mci, pdev);
+ if (rc) {
+ edac_printk(KERN_ERR, EDAC_MC,
+ "Failed to initialize instance\n");
+ goto free_edac_mc;
+ }
+
+ /* Attempt to register it with the EDAC subsystem */
+ rc = edac_mc_add_mc(mci);
+ if (rc) {
+ edac_printk(KERN_ERR, EDAC_MC,
+ "Failed to register with EDAC core\n");
+ goto free_edac_mc;
+ }
+
+ /* Register interrupts */
+ rc = npcm7xx_edac_register_irq(mci, pdev);
+ if (rc)
+ goto free_edac_mc;
+
+ return 0;
+
+free_edac_mc:
+ edac_mc_free(mci);
+
+ return rc;
+}
+
+/**
+ * npcm7xx_edac_mc_remove - Unbind driver from controller
+ * @pdev: Pointer to the platform_device struct
+ *
+ * Return: Unconditionally 0
+ */
+static int npcm7xx_edac_mc_remove(struct platform_device *pdev)
+{
+ struct mem_ctl_info *mci = platform_get_drvdata(pdev);
+
+ edac_mc_del_mc(&pdev->dev);
+ edac_mc_free(mci);
+
+ return 0;
+}
+
+static struct platform_driver npcm7xx_edac_driver = {
+ .probe = npcm7xx_edac_mc_probe,
+ .remove = npcm7xx_edac_mc_remove,
+ .driver = {
+ .name = EDAC_MOD_NAME,
+ .of_match_table = npcm7xx_edac_of_match,
+ },
+};
+
+module_platform_driver(npcm7xx_edac_driver);
+
+MODULE_AUTHOR("Quanta Computer Inc.");
+MODULE_DESCRIPTION("Nuvoton NPCM7xx EDAC Driver");
+MODULE_LICENSE("GPL v2");
--
2.21.0
More information about the openbmc
mailing list