[PATCH] ARM: dts: aspeed: Add Swift BMC machine
Matt Spinler
mspinler at linux.ibm.com
Wed Mar 13 08:47:13 AEDT 2019
On 3/5/2019 3:07 PM, Adriana Kobylak wrote:
> The Swift BMC is an ASPEED ast2500 based BMC that is part of
> a Power9 server. This adds the device tree description for
> most upstream components.
> There's a pending TODO to create the flash layout for its
> 16GB NAND flash chip. Use the default 32MB NOR flash chip
> for this initial commit.
>
> Signed-off-by: Adriana Kobylak <anoo at linux.ibm.com>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/aspeed-bmc-opp-swift.dts | 702 +++++++++++++++++++++++++++++
> 2 files changed, 703 insertions(+)
> create mode 100644 arch/arm/boot/dts/aspeed-bmc-opp-swift.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 1a2db60..2e0011b 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1204,6 +1204,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
> aspeed-bmc-opp-lanyang.dtb \
> aspeed-bmc-opp-palmetto.dtb \
> aspeed-bmc-opp-romulus.dtb \
> + aspeed-bmc-opp-swift.dtb \
> aspeed-bmc-opp-witherspoon.dtb \
> aspeed-bmc-opp-zaius.dtb \
> aspeed-bmc-portwell-neptune.dtb \
> diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts b/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts
> new file mode 100644
> index 0000000..27459b7
> --- /dev/null
> +++ b/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts
> @@ -0,0 +1,702 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/dts-v1/;
> +#include "aspeed-g5.dtsi"
> +#include <dt-bindings/gpio/aspeed-gpio.h>
> +#include <dt-bindings/leds/leds-pca955x.h>
> +
> +/ {
> + model = "Swift BMC";
> + compatible = "ibm,swift-bmc", "aspeed,ast2500";
> +
> + chosen {
> + stdout-path = &uart5;
> + bootargs = "console=ttyS4,115200 earlyprintk";
> + };
> +
> + memory at 80000000 {
> + reg = <0x80000000 0x20000000>;
> + };
> +
> + reserved-memory {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + flash_memory: region at 98000000 {
> + no-map;
> + reg = <0x98000000 0x04000000>; /* 64M */
> + };
> +
> + gfx_memory: framebuffer {
> + size = <0x01000000>;
> + alignment = <0x01000000>;
> + compatible = "shared-dma-pool";
> + reusable;
> + };
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> +
> + air-water {
> + label = "air-water";
> + gpios = <&gpio ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(B, 5)>;
> + };
> +
> + checkstop {
> + label = "checkstop";
> + gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(J, 2)>;
> + };
> +
> + ps0-presence {
> + label = "ps0-presence";
> + gpios = <&gpio ASPEED_GPIO(R, 7) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(R, 7)>;
> + };
> +
> + ps1-presence {
> + label = "ps1-presence";
> + gpios = <&gpio ASPEED_GPIO(N, 0) GPIO_ACTIVE_LOW>;
> + linux,code = <ASPEED_GPIO(N, 0)>;
> + };
> + };
> +
> + iio-hwmon-battery {
> + compatible = "iio-hwmon";
> + io-channels = <&adc 12>;
> + };
> +
> + gpio-keys-polled {
> + compatible = "gpio-keys-polled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + poll-interval = <1000>;
> +
> + fan0-presence {
> + label = "fan0-presence";
> + gpios = <&pca0 5 GPIO_ACTIVE_LOW>;
> + linux,code = <5>;
> + };
> +
> + fan1-presence {
> + label = "fan1-presence";
> + gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
> + linux,code = <6>;
> + };
> +
> + fan2-presence {
> + label = "fan2-presence";
> + gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
> + linux,code = <7>;
> + };
> +
> + fan3-presence {
> + label = "fan3-presence";
> + gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
> + linux,code = <8>;
> + };
> +
> + fanboost-presence {
> + label = "fanboost-presence";
> + gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
> + linux,code = <9>;
> + };
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + fan0 {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca0 0 GPIO_ACTIVE_LOW>;
> + };
> +
> + fan1 {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca0 1 GPIO_ACTIVE_LOW>;
> + };
> +
> + fan2 {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca0 2 GPIO_ACTIVE_LOW>;
> + };
> +
> + fan3 {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca0 3 GPIO_ACTIVE_LOW>;
> + };
> +
> + fanboost {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca0 4 GPIO_ACTIVE_LOW>;
> + };
> +
> + front-fault {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca0 13 GPIO_ACTIVE_LOW>;
> + };
> +
> + front-power {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca0 14 GPIO_ACTIVE_LOW>;
> + };
> +
> + front-id {
> + retain-state-shutdown;
> + default-state = "keep";
> + gpios = <&pca0 15 GPIO_ACTIVE_LOW>;
> + };
> +
> + rear-fault {
> + gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>;
> + };
> +
> + rear-id {
> + gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_LOW>;
> + };
> +
> + rear-power {
> + gpios = <&gpio ASPEED_GPIO(N, 3) GPIO_ACTIVE_LOW>;
> + };
> + };
> +
> + fsi: gpio-fsi {
> + compatible = "fsi-master-gpio", "fsi-master";
> + #address-cells = <2>;
> + #size-cells = <0>;
> + no-gpio-delays;
> +
> + clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
> + data-gpios = <&gpio ASPEED_GPIO(E, 0) GPIO_ACTIVE_HIGH>;
> + mux-gpios = <&gpio ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
> + enable-gpios = <&gpio ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
> + trans-gpios = <&gpio ASPEED_GPIO(P, 3) GPIO_ACTIVE_HIGH>;
> + };
> +
> + iio-hwmon-dps310 {
> + compatible = "iio-hwmon";
> + io-channels = <&dps 0>;
> + };
> +
> +};
> +
> +/* TODO Update flash layout for 16GB NAND */
> +&fmc {
> + status = "okay";
> + flash at 0 {
> + status = "okay";
> + m25p,fast-read;
> + label = "bmc";
> + spi-max-frequency = <50000000>;
> +#include "openbmc-flash-layout.dtsi"
> + };
> +};
> +
> +&spi1 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_spi1_default>;
> +
> + flash at 0 {
> + status = "okay";
> + label = "pnor";
> + m25p,fast-read;
> + spi-max-frequency = <100000000>;
> + };
> +};
> +
> +&uart1 {
> + /* Rear RS-232 connector */
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_txd1_default
> + &pinctrl_rxd1_default
> + &pinctrl_nrts1_default
> + &pinctrl_ndtr1_default
> + &pinctrl_ndsr1_default
> + &pinctrl_ncts1_default
> + &pinctrl_ndcd1_default
> + &pinctrl_nri1_default>;
> +};
> +
> +&uart2 {
> + /* APSS */
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
> +};
> +
> +&uart5 {
> + status = "okay";
> +};
> +
> +&lpc_ctrl {
> + status = "okay";
> + memory-region = <&flash_memory>;
> + flash = <&spi1>;
> +};
> +
> +&mbox {
> + status = "okay";
> +};
> +
> +&mac0 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_rmii1_default>;
> + use-ncsi;
> +};
> +
> +&i2c2 {
> + status = "okay";
> +
> + /* MUX ->
> + * Samtec 1
> + * Samtec 2
> + */
> +};
> +
> +&i2c3 {
> + status = "okay";
> +
> + max31785 at 52 {
> + compatible = "maxim,max31785a";
> + reg = <0x52>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + fan at 0 {
> + compatible = "pmbus-fan";
> + reg = <0>;
> + tach-pulses = <2>;
> + maxim,fan-rotor-input = "tach";
> + maxim,fan-pwm-freq = <25000>;
> + maxim,fan-dual-tach;
The 4 main fans are single rotor, so you don't need the fan-dual-tach
line on them.
I'm not sure about that booster fan though.
> + maxim,fan-no-watchdog;
> + maxim,fan-no-fault-ramp;
> + maxim,fan-ramp = <2>;
> + maxim,fan-fault-pin-mon;
> + };
> +
> + fan at 1 {
> + compatible = "pmbus-fan";
> + reg = <1>;
> + tach-pulses = <2>;
> + maxim,fan-rotor-input = "tach";
> + maxim,fan-pwm-freq = <25000>;
> + maxim,fan-dual-tach;
> + maxim,fan-no-watchdog;
> + maxim,fan-no-fault-ramp;
> + maxim,fan-ramp = <2>;
> + maxim,fan-fault-pin-mon;
> + };
> +
> + fan at 2 {
> + compatible = "pmbus-fan";
> + reg = <2>;
> + tach-pulses = <2>;
> + maxim,fan-rotor-input = "tach";
> + maxim,fan-pwm-freq = <25000>;
> + maxim,fan-dual-tach;
> + maxim,fan-no-watchdog;
> + maxim,fan-no-fault-ramp;
> + maxim,fan-ramp = <2>;
> + maxim,fan-fault-pin-mon;
> + };
> +
> + fan at 3 {
> + compatible = "pmbus-fan";
> + reg = <3>;
> + tach-pulses = <2>;
> + maxim,fan-rotor-input = "tach";
> + maxim,fan-pwm-freq = <25000>;
> + maxim,fan-dual-tach;
> + maxim,fan-no-watchdog;
> + maxim,fan-no-fault-ramp;
> + maxim,fan-ramp = <2>;
> + maxim,fan-fault-pin-mon;
> + };
> +
> + fan at 4 {
> + compatible = "pmbus-fan";
> + reg = <4>;
> + tach-pulses = <2>;
> + maxim,fan-rotor-input = "tach";
> + maxim,fan-pwm-freq = <25000>;
> + maxim,fan-dual-tach;
> + maxim,fan-no-watchdog;
> + maxim,fan-no-fault-ramp;
> + maxim,fan-ramp = <2>;
> + maxim,fan-fault-pin-mon;
> + };
> + };
> +
> + pca0: pca9552 at 60 {
> + compatible = "nxp,pca9552";
> + reg = <0x60>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + gpio at 0 {
> + reg = <0>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 1 {
> + reg = <1>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 2 {
> + reg = <2>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 3 {
> + reg = <3>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 4 {
> + reg = <4>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 5 {
> + reg = <5>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 6 {
> + reg = <6>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 7 {
> + reg = <7>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 8 {
> + reg = <8>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 9 {
> + reg = <9>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 10 {
> + reg = <10>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 11 {
> + reg = <11>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 12 {
> + reg = <12>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 13 {
> + reg = <13>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 14 {
> + reg = <14>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 15 {
> + reg = <15>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + };
> +
> + power-supply at 68 {
> + compatible = "ibm,cffps1";
> + reg = <0x68>;
> + };
> +
> + eeprom at 50 {
> + compatible = "atmel,24c64";
> + reg = <0x50>;
> + };
> +
> + power-supply at 69 {
> + compatible = "ibm,cffps1";
> + reg = <0x69>;
> + };
> +
> + eeprom at 51 {
> + compatible = "atmel,24c64";
> + reg = <0x51>;
> + };
> +};
> +
> +&i2c7 {
> + status = "okay";
> +
> + dps: dps310 at 76 {
> + compatible = "infineon,dps310";
> + reg = <0x76>;
> + #io-channel-cells = <0>;
> + };
> +
> + tmp275 at 48 {
> + compatible = "ti,tmp275";
> + reg = <0x48>;
> + };
> +
> + si7021a20 at 20 {
> + compatible = "si,si7021a20";
> + reg = <0x20>;
> + };
> +
> + eeprom at 50 {
> + compatible = "atmel,24c64";
> + reg = <0x50>;
> + };
> +
> + pca9551 at 60 {
> + compatible = "nxp,pca9551";
> + reg = <0x60>;
> + };
> +};
> +
> +&i2c8 {
> + status = "okay";
> +
> + pca9552: pca9552 at 60 {
> + compatible = "nxp,pca9552";
> + reg = <0x60>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N",
> + "GPU0_TH_OVERT_N_BUFF", "GPU1_TH_OVERT_N_BUFF",
> + "GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF",
> + "P9_SCM0_PRES", "P9_SCM1_PRES",
> + "GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF",
> + "GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF",
> + "PRESENT_VRM_CP0_N", "PRESENT_VRM_CP1_N",
> + "12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N";
> +
> + gpio at 0 {
> + reg = <0>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 1 {
> + reg = <1>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 2 {
> + reg = <2>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 3 {
> + reg = <3>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 4 {
> + reg = <4>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 5 {
> + reg = <5>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 6 {
> + reg = <6>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 7 {
> + reg = <7>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 8 {
> + reg = <8>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 9 {
> + reg = <9>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 10 {
> + reg = <10>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 11 {
> + reg = <11>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 12 {
> + reg = <12>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 13 {
> + reg = <13>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 14 {
> + reg = <14>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> +
> + gpio at 15 {
> + reg = <15>;
> + type = <PCA955X_TYPE_GPIO>;
> + };
> + };
> +
> + rtc at 32 {
> + compatible = "epson,rx8900";
> + reg = <0x32>;
> + };
> +
> + eeprom at 51 {
> + compatible = "atmel,24c64";
> + reg = <0x51>;
> + };
> +
> + ucd90160 at 64 {
> + compatible = "ti,ucd90160";
> + reg = <0x64>;
> + };
> +};
> +
> +&i2c9 {
> + status = "okay";
> +
> + tmp423a at 4c {
> + compatible = "ti,tmp423";
> + reg = <0x4c>;
> + };
> +
> + ir35221 at 71 {
> + compatible = "infineon,ir35221";
> + reg = <0x71>;
> + };
> +
> + ir35221 at 72 {
> + compatible = "infineon,ir35221";
> + reg = <0x72>;
> + };
> +};
> +
> +&i2c10 {
> + status = "okay";
> +
> + tmp423a at 4c {
> + compatible = "ti,tmp423";
> + reg = <0x4c>;
> + };
> +
> + ir35221 at 71 {
> + compatible = "infineon,ir35221";
> + reg = <0x71>;
> + };
> +
> + ir35221 at 72 {
> + compatible = "infineon,ir35221";
> + reg = <0x72>;
> + };
> +};
> +
> +&i2c11 {
> + /* MUX
> + * -> PCIe Slot 0
> + * -> PCIe Slot 1
> + * -> PCIe Slot 2
> + * -> PCIe Slot 3
> + */
> + status = "okay";
> +};
> +
> +&i2c12 {
> + status = "okay";
> +
> + tmp275 at 48 {
> + compatible = "ti,tmp275";
> + reg = <0x48>;
> + };
> +
> + tmp275 at 4a {
> + compatible = "ti,tmp275";
> + reg = <0x4a>;
> + };
> +};
> +
> +&i2c13 {
> + status = "okay";
> +};
> +
> +&vuart {
> + status = "okay";
> +};
> +
> +&gfx {
> + status = "okay";
> + memory-region = <&gfx_memory>;
> +};
> +
> +&pinctrl {
> + aspeed,external-nodes = <&gfx &lhc>;
> +};
> +
> +&wdt1 {
> + aspeed,reset-type = "none";
> + aspeed,external-signal;
> + aspeed,ext-push-pull;
> + aspeed,ext-active-high;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_wdtrst1_default>;
> +};
> +
> +&wdt2 {
> + aspeed,alt-boot;
> +};
> +
> +&ibt {
> + status = "okay";
> +};
> +
> +&adc {
> + status = "okay";
> +};
> +
> +#include "ibm-power9-dual.dtsi"
More information about the openbmc
mailing list