New repo for System Fatal Error Diagnostics for POWER Systems

[Brad Bishop]

On Tue, Mar 05, 2019 at 12:27:10PM -0600, zshelle wrote:
>On 2019-02-28 10:38, zshelle wrote:
>>The design proposal is here:
>>https://gerrit.openbmc-project.xyz/#/c/openbmc/docs/+/18591/
>>
>>In the design proposal, I indicated we need a repo for the analyzer
>>side and the isolator side of the diagnostics. The analyzer side will
>>all be OpenBMC specific code. That is the easy one. The isolator side
>>will be common code used throughout several projects within OpenPOWER
>>in addition to its application in OpenBMC. It's been pointed out to me
>>that there will be some convenient advantages to putting this isolator
>>repo in the OpenBMC project. However, it will be used heavily in
>>several OpenPOWER projects. I should point out that while the isolator
>>is currently geared towards POWER, it has the potential to be used on
>>other architectures in the future. I would appreciate any input on
>>this topic.
>
>Is there enough information in the proposal to at least get the repos 
>created? Sorry to push, but I want to get these repos created before I 
>am out on paternity leave starting this Friday.
>
>For the analyzer, I was thinking of openpower-hw-diags or something 
>along those lines.
>
>I could use some suggestions for the isolator. It sounds like it could 
>be used by more than POWER.

Hi Zane

openpower-hw-diags and openpower-libhei (as discussed in IRC) created.
thx.

-brad