[PATCH dev-5.1 v8] ARM: dts: nuvoton: Update Quanta GSJ BMC Device Tree.
Fran Hsu
franhsutw at gmail.com
Wed Jun 12 19:44:30 AEST 2019
This patch cleans up the warning message when build GSJ device tree.
1. Remove the part of i2c-slave-mqueue from GSJ device tree.
2. Thanks for Joel's reminder I also remove the nodes of
disabled i2c bus from GSJ device tree.
Tested:
Build Quanta GSJ image and load on the GSJ BMC module.
Ensure that BMC boots to console successful.
Signed-off-by: Fran Hsu <Fran.Hsu at quantatw.com>
---
arch/arm/boot/dts/nuvoton-npcm730-gsj.dts | 62 +----------------------
1 file changed, 1 insertion(+), 61 deletions(-)
diff --git a/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts b/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts
index 380d0d382395..801ed73d962c 100644
--- a/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts
+++ b/arch/arm/boot/dts/nuvoton-npcm730-gsj.dts
@@ -5,7 +5,7 @@
#include "nuvoton-npcm730.dtsi"
#include "nuvoton-npcm730-gsj-gpio.dtsi"
/ {
- model = "Quanta GSJ Board (Device Tree v11)";
+ model = "Quanta GSJ Board (Device Tree v12)";
compatible = "nuvoton,npcm750";
aliases {
@@ -13,21 +13,15 @@
ethernet1 = &gmac0;
serial3 = &serial3;
udc9 = &udc9;
- i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;
i2c3 = &i2c3;
i2c4 = &i2c4;
- i2c5 = &i2c5;
- i2c6 = &i2c6;
- i2c7 = &i2c7;
i2c8 = &i2c8;
i2c9 = &i2c9;
i2c10 = &i2c10;
i2c11 = &i2c11;
i2c12 = &i2c12;
- i2c13 = &i2c13;
- i2c14 = &i2c14;
i2c15 = &i2c15;
fiu0 = &fiu0;
};
@@ -162,13 +156,6 @@
status = "okay";
};
- i2c0: i2c at 80000 {
- #address-cells = <1>;
- #size-cells = <0>;
- bus-frequency = <100000>;
- status = "disabled";
- };
-
i2c1: i2c at 81000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -217,27 +204,6 @@
};
};
- i2c5: i2c at 85000 {
- #address-cells = <1>;
- #size-cells = <0>;
- bus-frequency = <100000>;
- status = "disabled";
- };
-
- i2c6: i2c at 86000 {
- #address-cells = <1>;
- #size-cells = <0>;
- bus-frequency = <100000>;
- status = "disabled";
- };
-
- i2c7: i2c at 87000 {
- #address-cells = <1>;
- #size-cells = <0>;
- bus-frequency = <100000>;
- status = "disabled";
- };
-
i2c8: i2c at 88000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -296,32 +262,6 @@
};
};
- i2c13: i2c at 8d000 {
- #address-cells = <1>;
- #size-cells = <0>;
- bus-frequency = <100000>;
- status = "okay";
-
- ipmb at 40000010 {
- compatible = "slave-mqueue";
- reg = <0x40000010>;
- status = "okay";
- };
- };
-
- i2c14: i2c at 8e000 {
- #address-cells = <1>;
- #size-cells = <0>;
- bus-frequency = <100000>;
- status = "okay";
-
- ipmb at 40000012 {
- compatible = "slave-mqueue";
- reg = <0x40000012>;
- status = "okay";
- };
- };
-
i2c15: i2c at 8f000 {
#address-cells = <1>;
#size-cells = <0>;
--
2.21.0
More information about the openbmc
mailing list