Network Settings GUI

Jandra A jandraara at gmail.com
Wed Jul 17 06:22:07 AEST 2019


Hi Ruixia,

Thanks for the clarification. I wanted to let you know we are still working
on this and hoping to get it to you all as soon as we can. I want to make
sure we are understanding the requirements for Lenovo:

- Need the ability to support both IPV4 and IPV6 simultaneously on a single
interface.
- In the case the both IPV4 and IPV6 are enabled in a single interface,
zero-configuration cannot assign addresses to either.
- The format for IPV6 DNS servers is the same as IPV6 IP addresses. Do each
of these also have a Fully Qualified Domain Name (FQDN)?
- Only two IP addresses maximum (in addition to those provided by
zero-config, if any) will be supported per interface. If there are two, one
must be IPV4 and one must be IPV6.
- For IPV6, we will support either DHCP or static configurations, not both
at the same time on the same interface. Same applies for IPV6, though IPV4
can be different from IPV6.

Thank you for your patience with us.

Regards,
Jandra Aranguren

On Wed, Jul 3, 2019 at 12:49 AM 孙瑞霞 <rxsun at zd-tech.com.cn> wrote:

> Hi Jandra,
> >>In the case that DHCP doesn't give either, both IPV4 and IPV6 are
> enabled.
> >>In the case that IPV6 DHCP is given ,IPV6 are disabled,so are IPV4.
>
> >Can you clarify this? I do not follow.
>
> when both IPV4 and IPV6 are enabled and DHCP is disabled and the user
> input nothing to IPV4 and IPV6 address input box (zeroconf),in this case,it
> shall not to assign any IP address to bmc network device, the webui should
> give an error tips to users.
>
> It only works when the user input the correct format IP address.
> PS:Having a check box to enable ipv4 and ipv6 configuration would be
> better.
> One useful link:
> https://support.code42.com/Administrator/6/Configuring/How_to_use_both_IPv4_and_IPv6_in_your_Code42_environment
> Best,
> Ruixia
>
> 在 2019/7/2 下午8:57, Jandra A 写道:
>
>
>>    - In the case that DHCP doesn't give either, both IPV4 and IPV6 are
>>    enabled.
>>
>>
>>    - In the case that IPV6 DHCP is given ,IPV6 are disabled,so are IPV4.
>>
>>
> Can you clarify this? I do not follow.
>
> On Tue, Jul 2, 2019 at 3:14 AM 孙瑞霞 <rxsun at zd-tech.com.cn> wrote:
>
>> Hi,
>>
>> The following item is expected,
>>
>>    - In the case that DHCP doesn't give either, both IPV4 and IPV6 are
>>    enabled.
>>
>>
>>    - In the case that IPV6 DHCP is given ,IPV6 are disabled,so are IPV4.
>>
>>
>>    - IPV6 DNS servers  is in the format of an IPV6 IP address.
>>
>> it will be similar with the picture below, maybe.
>>
>> Best regard, thanks.
>>
>> ruixia,sun.
>>
>>
>> 在 2019/7/1 下午11:26, Jandra A 写道:
>>
>> Ruixia -- I am waiting on a couple of responses from our backend team to
>> be able to provide a design that aligns with how the functionality is
>> developed.
>>
>> Ratan -- I'm helping create the design mockup for including IPV6 in the
>> Network settings panel so that Lenovo can do the front-end implementation.
>> Do you know if the work your team was doing for this will be merged to the
>> master soon?
>>
>> I have some questions I am hoping you can help answer for this IPV6
>> design:
>> - What happens to zeroconf when both IPV4 and IPV6 are enabled? Does it
>> try to assign an IP address to both (in the case that DHCP doesn't give
>> either) or does it only assign either an IPV4 IP address or an IPV6 IP
>> address?
>> - What is the format of IPV6 DNS servers? Is that also in the format of
>> an IPV6 IP address?
>>
>> I have built the latest openbmc project image by adding the option "ipv6"
>>> in the term DISTRO_FEATURES_DEFAULT in the file
>>> /meta-phosphor/conf/distro/include/phosphor-base.inc. I can ping the
>>> openbmc  IPV6 IP successfully, but cannot login to it by openssh command.
>>> It seemed that there are some works on openbmc embedded OS to support
>>> IPV6.
>>> Another issue from Ruixia is the IPV6 Dbus Interfaces design, I found
>>> there are some IPV6 rest-Dbus or Redfish interfaces on yaml files
>>> available. I don' t know is it enough to the IPV6 webui.
>>
>>
>> Ratan, would you be able to help Ruixia and Xiuzhi with this?
>>
>> Regards,
>> Jandra Aranguren
>>
>>
>> On Mon, Jul 1, 2019 at 9:27 AM 孙瑞霞 <rxsun at zd-tech.com.cn> wrote:
>>
>>> hi,
>>> After the meeting of last week,I was expecting the email about ipv6 ui
>>> designing and ipv6 interface with web server ,when will I receive it?Should
>>> we have another meeting this week?
>>> best regard!
>>>
>>> ruixia,sun
>>>
>>>
>>> 孙瑞霞
>>> 邮箱:rxsun at zd-tech.com.cn
>>>
>>> <https://maas.mail.163.com/dashi-web-extend/html/proSignature.html?iconUrl=https%3A%2F%2Fmail-online.nosdn.127.net%2Fqiyelogo%2FdefaultAvatar.png&name=%E5%AD%99%E7%91%9E%E9%9C%9E&uid=example%40163.com&ftlId=3&items=%5B%22%E9%82%AE%E7%AE%B1%EF%BC%9Arxsun%40zd-tech.com.cn%22%5D>
>>>
>>> 签名由 网易邮箱大师 <https://mail.163.com/dashi/dlpro.html?from=mail88> 定制
>>> On 06/25/2019 23:25, Jandra A <jandraara at gmail.com> wrote:
>>>
>>> Great, let's meet using my webex
>>> https://ibm.webex.com/meet/jandra.aranguren I will send you an invite
>>> as well.
>>>
>>> On Tue, Jun 25, 2019 at 1:16 AM 孙瑞霞 <rxsun at zd-tech.com.cn> wrote:
>>>
>>>> Hi,all,
>>>> I will be glad to meet at 7:00AM Central time this Wednesday (June
>>>> 26th).
>>>>
>>>> Ruixia,Sun
>>>>
>>>>
>>>>
>>>> 发件人:"Jandra A" <jandraara at gmail.com>
>>>> 发送日期:2019-06-25 00:51:39
>>>> 收件人:xiuzhi <1450335857 at qq.com>
>>>> 抄送人:Derick <derick.montague at gmail.com>,openbmc <
>>>> openbmc at lists.ozlabs.org>,rxsun <rxsun at zd-tech.com.cn>
>>>> 主题:Re: Re: Network Settings GUI
>>>>
>>>> Hi Xiuzhi and Ruixia,
>>>>
>>>> It would be great to set some time to align on the requirements from
>>>> design and how to work together so that your team can start on the so
>>>> front-end development.
>>>>
>>>> Like Derick said, we meet every other Wednesday at 10:00 Central time
>>>> to discuss GUI issues, with the next one being next Wednesday (July 3rd).
>>>> Hopefully you can make that.
>>>>
>>>> If you cannot, I am happy to meet at 7:00 or 8:00 AM Central time this
>>>> Wednesday (June 26th) or Friday (June 28th). Please let me know.
>>>>
>>>> Regards,
>>>>
>>>> On Wed, Jun 19, 2019 at 8:30 PM xiuzhi <1450335857 at qq.com> wrote:
>>>>
>>>>> Hi Derick,
>>>>> >> The IPV6 webui should support both IPV4 and IPV6 on a single
>>>>> interface at the same time and users can set IPV4 and IPV6 on the same
>>>>> network webpage from Lenovo test cases.
>>>>>
>>>>> >Thank you!
>>>>>
>>>>> >>  Ruixia (her email: rxsun at zd-tech.com.cn;), form my team can do
>>>>> front-end  to implement your design .  It would be best if the IPV6 feature
>>>>> could be achieved in one to two months.
>>>>>
>>>>> >It would be great if she were able to join our GUI Community
>>>>> workgroup. It's every other Wednesday at 10:00 Central Time. We use
>>>>> these to discuss all the GUI issues. Where are you located?
>>>>>   I am in BeiJing  UTC+8. The meeting time is  Wednesday  23:00
>>>>> Beijing Time (Wednesday 10:00 am Central Daylight Time),isn't it?
>>>>> >GUI Community Workgroup Wiki:
>>>>> https://github.com/openbmc/openbmc/wiki/GUI-Design-work-group
>>>>>
>>>>> Best,
>>>>> Xiuzhi
>>>>>
>>>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/openbmc/attachments/20190716/db190504/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 1935163017.jpg
Type: image/jpeg
Size: 32204 bytes
Desc: not available
URL: <http://lists.ozlabs.org/pipermail/openbmc/attachments/20190716/db190504/attachment-0001.jpg>


More information about the openbmc mailing list