[PATCH 5.2 v2 2/2] dt-binding: edac: add NPCM ECC documentation

[Rob Herring]

On Tue, Jul 9, 2019 at 3:50 AM George Hung (洪忠敬)
<George.Hung at quantatw.com> wrote:
>
> Hi Rob,
>
>
> > -----Original Message-----
> > From: openbmc
> > [mailto:openbmc-bounces+george.hung=quantatw.com at lists.ozlabs.org] On
> > Behalf Of Rob Herring
> > Sent: Tuesday, July 09, 2019 9:41 AM
> > To: George Hung
> > Cc: Mark Rutland; Linus Walleij; Tali Perry; paulmck at linux.ibm.com;
> > wak at google.com; benjaminfair at google.com; openbmc at lists.ozlabs.org;
> > tomer.maimon at nuvoton.com; devicetree at vger.kernel.org; Borislav Petkov;
> > Avi.Fishman at nuvoton.com; Jonathan Cameron; Mauro Carvalho Chehab;
> > linux-edac; Patrick Venture; Nicolas Ferre; linux-kernel; James Morse; Greg
> > Kroah-Hartman; davem at davemloft.net
> > Subject: Re: [PATCH 5.2 v2 2/2] dt-binding: edac: add NPCM ECC
> > documentation
> >
> > On Wed, Jun 05, 2019 at 10:12:53PM +0800, George Hung wrote:
> > > Add device tree documentation for Nuvoton BMC ECC
> > >
> > > Signed-off-by: George Hung <ghung.quanta at gmail.com>
> > > ---
> > >  .../bindings/edac/npcm7xx-sdram-edac.txt        | 17
> > +++++++++++++++++
> > >  1 file changed, 17 insertions(+)
> > >  create mode 100644
> > > Documentation/devicetree/bindings/edac/npcm7xx-sdram-edac.txt
> > >
> > > diff --git
> > > a/Documentation/devicetree/bindings/edac/npcm7xx-sdram-edac.txt
> > > b/Documentation/devicetree/bindings/edac/npcm7xx-sdram-edac.txt
> > > new file mode 100644
> > > index 000000000000..dd4dac59a5bd
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/edac/npcm7xx-sdram-edac.txt
> > > @@ -0,0 +1,17 @@
> > > +Nuvoton NPCM7xx SoC EDAC device driver
> > > +
> > > +The Nuvoton NPCM7xx SoC supports DDR4 memory with/without ECC and
> > the
> > > +driver uses the EDAC framework to implement the ECC detection and
> > corrtection.
> > > +
> > > +Required properties:
> > > +- compatible:      should be "nuvoton,npcm7xx-sdram-edac"
> >
> > Is this for the whole SDRAM controller or just ECC related registers?
> > In the former case, the naming should just reflect the block name and not a
> > Linux term.
>
> Sorry for confused naming, the address space is for the whole memory controller registers indeed,
> but the driver only uses the ECC related registers.
> Should I change the name to "nuvoton,npcm7xx-edac" ?

No, you should drop the 'edac' part. The DT describes the h/w, not
what one driver (currently) uses.

Rob