[PATCH 5.2 v2 2/2] dt-binding: edac: add NPCM ECC documentation

[Rob Herring]

On Wed, Jun 05, 2019 at 10:12:53PM +0800, George Hung wrote:
> Add device tree documentation for Nuvoton BMC ECC
> 
> Signed-off-by: George Hung <ghung.quanta at gmail.com>
> ---
>  .../bindings/edac/npcm7xx-sdram-edac.txt        | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/edac/npcm7xx-sdram-edac.txt
> 
> diff --git a/Documentation/devicetree/bindings/edac/npcm7xx-sdram-edac.txt b/Documentation/devicetree/bindings/edac/npcm7xx-sdram-edac.txt
> new file mode 100644
> index 000000000000..dd4dac59a5bd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/edac/npcm7xx-sdram-edac.txt
> @@ -0,0 +1,17 @@
> +Nuvoton NPCM7xx SoC EDAC device driver
> +
> +The Nuvoton NPCM7xx SoC supports DDR4 memory with/without ECC and the driver
> +uses the EDAC framework to implement the ECC detection and corrtection.
> +
> +Required properties:
> +- compatible:	should be "nuvoton,npcm7xx-sdram-edac"

Is this for the whole SDRAM controller or just ECC related registers? 
In the former case, the naming should just reflect the block name and 
not a Linux term.

> +- reg:		Memory controller register set should be <0xf0824000 0x1000>
> +- interrupts:	should be MC interrupt #25
> +
> +Example:
> +
> +	mc: memory-controller at f0824000 {
> +		compatible = "nuvoton,npcm7xx-sdram-edac";
> +		reg = <0xf0824000 0x1000>;
> +		interrupts = <0 25 4>;
> +	};
> -- 
> 2.21.0
>