do_cofigure fail

[Sheldon 13]

After I add a new application (such as *sdbus* or* phosphor-fan-presence*)
using DEVTOOL, I build it with BITBAKE, but it always get error like this:
##########################################################
NOTE: Executing RunQueue Tasks
ERROR: sdbusplus-1.0+git999-r0 do_configure: configure failed
ERROR: sdbusplus-1.0+git999-r0 do_configure: Function failed: do_configure
(log file is located at
/home/sheldon13/dev/openbmc-2.2/build/tmp/work/armv5e-openbmc-linux-gnueabi/sdbusplus/1.0+git999-r0/temp/log.do_configure.114229)
ERROR: Logfile of failure stored in:
/home/sheldon13/dev/openbmc-2.2/build/tmp/work/armv5e-openbmc-linux-gnueabi/sdbusplus/1.0+git999-r0/temp/log.do_configure.114229
Log data follows:
| DEBUG: Executing python function externalsrc_configure_prefunc
############################################################



My recipe file *sdbusplus_git.bb <http://sdbusplus_git.bb>* was
automatically generated by the DEVTOOL command ,it is like this:
##################################################################################################################
# Recipe created by recipetool
# This is the basis of a recipe and may need further editing in order to be
fully functional.
# (Feel free to remove these comments when editing.)

# WARNING: the following LICENSE and LIC_FILES_CHKSUM values are best
guesses - it is
# your responsibility to verify that the values are complete and correct.
#
# The following license files were not able to be identified and are
# represented as "Unknown" below, you will need to check them yourself:
#   LICENSE
LICENSE = "Unknown"
LIC_FILES_CHKSUM = "file://LICENSE;md5=e3fc50a88d0a364313df4b21ef20c29e"

SRC_URI = "git://github.com/openbmc/sdbusplus.git;protocol=https"

# Modify these as desired
PV = "1.0+git${SRCPV}"
SRCREV = "09c981700d7bd98eed54a670e959a424585dcd84"

S = "${WORKDIR}/git"

# NOTE: the following library dependencies are unknown, ignoring: gtest
gmock
#       (this is based on recipes that have previously been built and
packaged)
DEPENDS = "gtest systemd"

# NOTE: if this software is not capable of being built in a separate build
directory
# from the source, you should replace autotools with autotools-brokensep in
the
# inherit line
inherit pkgconfig pythonnative autotools

# Specify any options you want to pass to the configure script using
EXTRA_OECONF:
EXTRA_OECONF = ""
###############################################################################################################
and I didn't change the recipe and didn't know how to change it. Can you
help me build my project?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/openbmc/attachments/20190109/2d6bd823/attachment-0001.html>