Add sensors to S2600WF

[Zheng Bao]

Is there any chance to shrink the size of wolfpass to 32M?

Zheng

________________________________
From: openbmc on behalf of Alexander Amelkin
Sent: Tuesday, December 3, 2019 1:47 PM
To: AKASH G J; openbmc at lists.ozlabs.org
Subject: Re: Add sensors to S2600WF

03.12.2019 13:39, AKASH G J wrote:
Hi all,

I am using S2600WF configuration for BMC firmware.  We are having temperature sensors and ADC voltage monitors connected on board. All sensor readings are shown on hwmon sysfs interface.

But it is not coming when issuing IPMI commands.

$ ipmitool -I dbus sdr type temperature
$ ipmitool -I dbus sdr type voltage

Is there anything to be done to make sure sensor values are reported over DBus.

For s2600wf it's best to use the version of OpenBMC from the
Intel-BMC repository ([mailto:git at github.com:Intel-BMC/openbmc.git]git at github.com:Intel-BMC/openbmc.git).
I'm using their clean_builds branch.

Use 'wolfpass' machine there instead of `s2600wf` and build
'intel-platforms' instead of 'phosphor-obmc-image'.

Sensors work for me that way via IPMI.

With best regards,
Alexander Amelkin
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/openbmc/attachments/20191206/35fd0501/attachment.htm>