[PATCH] [v5] clocksource/drivers/npcm: fix GENMASK and timer operation
Avi Fishman
avifishman70 at gmail.com
Wed Aug 21 20:42:27 AEST 2019
Thanks Daniel,
It seems more clear now :)
Good to know about the need for Fixes tag.
On Wed, Aug 21, 2019 at 1:11 PM Daniel Lezcano
<daniel.lezcano at linaro.org> wrote:
>
> On 29/07/2019 19:03, Avi Fishman wrote:
> > NPCM7XX_Tx_OPER GENMASK bits where wrong,
> > Since NPCM7XX_REG_TICR0 register reset value of those bits was 0,
> > it did not cause an issue.
> > in npcm7xx_timer_oneshot() the original NPCM7XX_REG_TCSR0 register was
> > read again after masking it with ~NPCM7XX_Tx_OPER so the masking didn't
> > take effect.
> >
> > npcm7xx_timer_periodic() was not wrong but it wrote to NPCM7XX_REG_TICR0
> > in a middle of read modify write to NPCM7XX_REG_TCSR0 which is
> > confusing.
> > npcm7xx_timer_oneshot() did wrong calculation
> >
> > Signed-off-by: Avi Fishman <avifishman70 at gmail.com>
>
> I've applied the patch and massaged the changelog [1].
>
> Let me know if you disagree with it.
>
> Please, in the future take care of adding the Fixes tag.
>
> Thanks
>
> -- Daniel
>
> [1]
> https://git.linaro.org/people/daniel.lezcano/linux.git/commit/?h=clockevents/next&id=a5f6679fc81e42fcbef0184770d8a3b04c0f153e
>
> > ---
> > drivers/clocksource/timer-npcm7xx.c | 9 +++------
> > 1 file changed, 3 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/clocksource/timer-npcm7xx.c b/drivers/clocksource/timer-npcm7xx.c
> > index 8a30da7f083b..9780ffd8010e 100644
> > --- a/drivers/clocksource/timer-npcm7xx.c
> > +++ b/drivers/clocksource/timer-npcm7xx.c
> > @@ -32,7 +32,7 @@
> > #define NPCM7XX_Tx_INTEN BIT(29)
> > #define NPCM7XX_Tx_COUNTEN BIT(30)
> > #define NPCM7XX_Tx_ONESHOT 0x0
> > -#define NPCM7XX_Tx_OPER GENMASK(27, 3)
> > +#define NPCM7XX_Tx_OPER GENMASK(28, 27)
> > #define NPCM7XX_Tx_MIN_PRESCALE 0x1
> > #define NPCM7XX_Tx_TDR_MASK_BITS 24
> > #define NPCM7XX_Tx_MAX_CNT 0xFFFFFF
> > @@ -84,8 +84,6 @@ static int npcm7xx_timer_oneshot(struct clock_event_device *evt)
> >
> > val = readl(timer_of_base(to) + NPCM7XX_REG_TCSR0);
> > val &= ~NPCM7XX_Tx_OPER;
> > -
> > - val = readl(timer_of_base(to) + NPCM7XX_REG_TCSR0);
> > val |= NPCM7XX_START_ONESHOT_Tx;
> > writel(val, timer_of_base(to) + NPCM7XX_REG_TCSR0);
> >
> > @@ -97,12 +95,11 @@ static int npcm7xx_timer_periodic(struct clock_event_device *evt)
> > struct timer_of *to = to_timer_of(evt);
> > u32 val;
> >
> > + writel(timer_of_period(to), timer_of_base(to) + NPCM7XX_REG_TICR0);
> > +
> > val = readl(timer_of_base(to) + NPCM7XX_REG_TCSR0);
> > val &= ~NPCM7XX_Tx_OPER;
> > -
> > - writel(timer_of_period(to), timer_of_base(to) + NPCM7XX_REG_TICR0);
> > val |= NPCM7XX_START_PERIODIC_Tx;
> > -
> > writel(val, timer_of_base(to) + NPCM7XX_REG_TCSR0);
> >
> > return 0;
> >
>
>
> --
> <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
>
> Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
> <http://twitter.com/#!/linaroorg> Twitter |
> <http://www.linaro.org/linaro-blog/> Blog
>
--
Regards,
Avi
More information about the openbmc
mailing list