using phosphor-dbus-monitor
Matthew Barth
msbarth at linux.ibm.com
Wed Apr 10 00:12:22 AEST 2019
On 4/9/19 8:50 AM, Matt Spinler wrote:
> Hi Wim,
>
> If you could post your YAML somewhere, I could take a look for any
> obvious problems.
If you could also provide a little more details on the error your
attempting to log would be helpful (i.e. is there a dbus interface?).
>
> On 4/9/2019 2:23 AM, Wim Vervoorn wrote:
>> Hello Lei,
>>
>> Thanks for your response. I know this example too and it helps a bit
>> but it doesn’t really clarify all issues.
>>
>> As you've worked with this as well. Do you understand the meta item?
>> The example indicates it has different meaning but doesn't provide any
>> pointers to what those meanings are. Have you been able to find out?
What meta item are you referring to?
>>
>> Best Regards,
>> Wim Vervoorn
>>
>> -----Original Message-----
>> From: Lei YU [mailto:mine260309 at gmail.com]
>> Sent: Tuesday, April 9, 2019 5:44 AM
>> To: Wim Vervoorn <wvervoorn at eltan.com>; Matthew Barth
>> <msbarth at linux.ibm.com>
>> Cc: openbmc at lists.ozlabs.org
>> Subject: Re: using phosphor-dbus-monitor
>>
>>> I am trying to use phosphor-dbus-monitor to create logging of sensor
>>> exceptions like a Critical state on a specific sensor.
>>> I am able to create a solution with a building yaml but at the end it
>>> doesn’t deliver me the desired result.
>>> As there are very limited examples (on a few in the witherspoon) it
>>> is very hard to figure out where the mistake is.
>> There is an example yaml config in the repo:
>> https://github.com/openbmc/phosphor-dbus-monitor/blob/master/src/example/example.yaml
>>
>>
>> And I have the same feeling that it's hard to know what's wrong if
>> something is wrong.ei
>>
>>> Are there any tools that can be used to make this easier?
>> @Matthew Barth Could you kindly help to add some doc/tool to make it
>> easier to use?
Originally, the example yaml was meant to be the document which I
understand is probably not the greatest form when it comes to this.
Unfortunately enhancing the documentation would be a low priority at
this time but feel free to create/update the documentation from your
findings and push them up for review if you'd like.
>>
>>> Additionally is this the correct method to achieve this goal or
>>> should I use something else to define conditions for logging?
>> I think so. This repo is intended to watch the dbus and do stuff as
>> yaml config.
Correct. This repo was intended to perform error logging and/or system
level actions, such as a shutdown, based on object properties on dbus.
>>
>>
More information about the openbmc
mailing list