ipmi inventory

[Vijay Khemka]

Thanks Emily.

From: Emily Shaffer <emilyshaffer at google.com>
Date: Thursday, October 18, 2018 at 1:38 PM
To: Vijay Khemka <vijaykhemka at fb.com>
Cc: "openbmc at lists.ozlabs.org" <openbmc at lists.ozlabs.org>, Brad Bishop <bradleyb at fuzziesquirrel.com>
Subject: Re: ipmi inventory

From the spec:
"Indicates the physical entity that the sensor is monitoring or is otherwise
associated with the sensor. See Table 43-, Entity ID Codes."

Header for that table:

"The Entity ID field is used for identifying the physical entity that a sensor or device is associated with. If multiple
sensors refer to the same entity, they will have the same Entity ID field value. For example, if a voltage sensor
and a temperature sensor are both for a ‘Power Supply 1’ entity the Entity ID in their sensor data records would
both be 10 (0Ah), per the Entity ID table."

Check out the spec on your own for the table. It starts on page 550 as written in the pdf (although the file itself puts that on page 576)

On Thu, Oct 18, 2018 at 1:33 PM Vijay Khemka <vijaykhemka at fb.com<mailto:vijaykhemka at fb.com>> wrote:
Hi,
I am trying to find reference to entityID defined in config.yaml for ipmi unventory map. I see different value of entityID for different sections. Is there any documentation which defines what should be entityID and instance for each section.

Regards
-Vijay
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/openbmc/attachments/20181018/81360789/attachment-0001.html>