qemu does not work for the latest image?

Li, Yong B yong.b.li at linux.intel.com
Fri Nov 16 18:13:20 AEDT 2018


Thanks Andrew for your commands.  The issue is caused by my older qemu 
tool.

After downloaded qemu-system-arm, I can boot the image now!

Thanks,
Yong
On 11/15/2018 10:13 PM, Andrew Geissler wrote:
> On Thu, Nov 15, 2018 at 1:25 AM Yong Li<yong.b.li at linux.intel.com>  wrote:
>> Hi All,
>>
>>
>>
>> Previously I can use qemu to test these built images, but it does not work now and get the below error messages:
>> Just want to know if there is any command/options changes? Or it does not support now?
> Hey Yong, I pulled down the latest qemu binary and witherspoon image
> and it booted up fine for me.
>
> Here were my commands:
> wgethttps://openpower.xyz/job/openbmc-qemu-build-merge-x86/lastSuccessfulBuild/artifact/qemu/arm-softmmu/qemu-system-arm
> wgethttps://openpower.xyz/job/openbmc-build/distro=ubuntu,label=builder,target=witherspoon/lastSuccessfulBuild/artifact/deploy/images/witherspoon/obmc-phosphor-image-witherspoon.ubi.mtd
> ./qemu-system-arm -m 256 -M witherspoon-bmc -nographic -drive
> file=./obmc-phosphor-image-witherspoon.ubi.mtd,format=raw,if=mtd -net
> nic -net user,hostfwd=:127.0.0.1:2622-:22,hostfwd=:127.0.0.1:2643-:443,hostfwd=:127.0.0.1:8580-:80,hostname=qemu
>
>> qemu-system-arm -m 256 -M witherspoon-bmc -nographic -drive file=tmp/deploy/images/witherspoon/obmc-phosphor-image-poon.ubi.mtd,format=raw,if=mtd
>>
>> qemu-system-arm: Aspeed iBT has no chardev backend
>>
>> U-Boot 2016.07 (Nov 15 2018 - 06:18:37 +0000)
>>
>>
>>
>>         Watchdog enabled
>>
>> DRAM:  240 MiB
>>
>> Flash: 32 MiB
>>
>> *** Warning - bad CRC, using default environment
>>
>>
>>
>> In:    serial
>>
>> Out:   serial
>>
>> Err:   serial
>>
>> Net:   aspeednic#0
>>
>> Error: aspeednic#0 address not set.
>>
>>
>>
>> Hit any key to stop autoboot:  0
>>
>> ubi0: attaching mtd1
>>
>> ubi0: scanning is finished
>>
>> UBI init error 12
>>
>> Error, no UBI device/partition selected!
>>
>> Wrong Image Format for bootm command
>>
>> ERROR: can't get kernel image!
>>
>>
>>
>>
>>
>> Thanks,
>>
>> Yong



More information about the openbmc mailing list