openbmc Digest, Vol 39, Issue 49

[xiuzhi]

Hi qianlihu,
  Where can I get the testtool   kcsbridged  ?
Which environment should it run, on BMC OS or on host side?
Best,
Xiuzhi
Message: 2
Date: Thu, 15 Nov 2018 09:49:06 +0800
From: qianlihu <wangzhiqiang8906 at gmail.com>
To: jae.hyun.yoo at linux.intel.com
Cc: openbmc at lists.ozlabs.org
Subject: Re: [HELP] ipmi-kcs didn't work
Message-ID:
	<CAHkHK09Km5BVLdq7OMSwTLi05-KgDc8K8j9_+e1ewtGanyr4Tg at mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"

Hi,Jae

>
> Hi,
>
> On 11/14/2018 2:38 AM, qianlihu wrote:
> > Hi,
> >
> > I add ipmi kcs node,but it didn't work
> >
> > here is the patch for dts.
> >
> >          lpc_bmc: lpc-bmc at 0 {
> > -               compatible = "aspeed,ast2500-lpc-bmc";
> > +               compatible = "aspeed,ast2500-lpc-bmc", "simple-mfd", "syscon";
> > +
> >                  reg = <0x0 0x80>;
> > +               reg-io-width = <4>;
> > +
> > +               #address-cells = <1>;
> > +               #size-cells = <1>;
> > +               ranges = <0x0 0x0 0x80>;
> > +
> > +               kcs3: kcs3 at 0 {
> > +                       compatible = "aspeed,ast2500-kcs-bmc";
> > +                       reg = <0x0 0x80>;
> > +                       interrupts = <8>;
> > +                       kcs_chan = <3>;
> > +                       kcs_addr = <0xca2>;
>
> Probably, you should add a clock setting for KCS H/W block into here.
>
>         clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
>
I tried ,but it didn't work?

> Cheers,
>
> Jae
>
> > +                       status = "disabled";
> > +
> > +               };
> >          };
> >
> > +&kcs3 {
> >                           +       status = "okay";
> >          +};
> >
> >
> > The device node /dev/ipmi-kcs3 is created.
> >
> >
> > root at sanjose:/tmp# 
> > Debug logging
> > Starting
> > Registering dbus methods/signals
> > Requesting dbus name: org.openbmc.HostIpmi
> > Getting dbus file descriptors
> > Opening /dev/ipmi-kcs3
> > Creating timer fd
> > Entering polling loop
> > Processed 1 dbus events
> > Processed 1 dbus events
> > Processed 1 dbus events
> > Processed 1 dbus events
> > Processed 1 dbus events
> > Processed 1 dbus events
> > Processed 1 dbus events
> >
> > but there is nothing output.
> >

this is the dmesg info

root at sanjose:~# dmesg |grep kcs
[    2.052340] aspeed-kcs-bmc: channel=3 addr=0xca2 idr=0x2c odr=0x38 str=0x44

I also checked the hardtrap:
0x1e6e2070[bit25]  enabled the lpc mode

I'm sure the IO port is 0xca2.


should I config the pin for LPC,I checked the ibt node,it didn't.


thank you

--qianlihu



End of openbmc Digest, Vol 39, Issue 49
***************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/openbmc/attachments/20181115/9e605622/attachment.html>