[PATCH v2 0/2] pinctrl: nuvoton: add driver for NPCM7xx

[Tomer Maimon]

This patch set adds pinmux and GPIO controller for the Nuvoton
NPCM750/730/715/705 Baseboard Management Controller (BMC).

The Nuvoton BMC NPCM750/730/715/705 Pinmux functions accessible
only for pin groups and pinconf parameters available only for 
individual pins.

The Nuvoton BMC NPCM750/730/715/705 has eight identical GPIO 
modules, each module has 32 GPIO ports.

Most of the GPIO ports are multiplexed with other system functions.

The NPCM7xx pinctrl and GPIO driver tested on NPCM750 evaluation board.

Addressed comments from:.
 - Rob Herring: https://www.spinics.net/lists/kernel/msg2853083.html
				  
Changes since version 1:
 - Remove Kconfig MFD_SYSCON dependency.
 - Modify setfunc function.
 - Modify dt-binding documentation according Rob comments.

Tomer Maimon (2):
  dt-binding: pinctrl: Add NPCM7xx pinctrl and GPIO documentation
  pinctrl: nuvoton: add NPCM7xx pinctrl and GPIO driver

 .../bindings/pinctrl/nuvoton,npcm7xx-pinctrl.txt   |  216 ++
 drivers/pinctrl/Kconfig                            |    1 +
 drivers/pinctrl/Makefile                           |    1 +
 drivers/pinctrl/nuvoton/Kconfig                    |   12 +
 drivers/pinctrl/nuvoton/Makefile                   |    4 +
 drivers/pinctrl/nuvoton/pinctrl-npcm7xx.c          | 2089 ++++++++++++++++++++
 6 files changed, 2323 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/nuvoton,npcm7xx-pinctrl.txt
 create mode 100644 drivers/pinctrl/nuvoton/Kconfig
 create mode 100644 drivers/pinctrl/nuvoton/Makefile
 create mode 100644 drivers/pinctrl/nuvoton/pinctrl-npcm7xx.c

-- 
2.14.1