[HELP] ipmi-kcs didn't work

[Samuel Jiang]

Hi Ryan,

I want to confirm the register default set of LCLK is running or stop for Aspped SoC?

Hi Jae,
I want to confirm that does the aspeed_gates is set for matching with the SoC default clock setting?


I need to these things information for joining the discussion to assist patch to send upstream.

Thanks,

Samuel Jiang

On Dec 4, 2018, 2:17 PM +0800, Ryan Chen , wrote:
> Hello Jae,
> ASPEED LPC IP HW block have serval clk input.
> Most important is LCLK is come from LPC Host.
> The others is not controllable by register.
> Ryan
>
> -----Original Message-----
> From: Vijay Khemka [mailto:vijaykhemka at fb.com]
> Sent: Tuesday, December 4, 2018 3:38 AM
> To: Jae Hyun Yoo <jae.hyun.yoo at linux.intel.com>; Samuel Jiang <chyishian.jiang at gmail.com>; qianlihu <wangzhiqiang8906 at gmail.com>; Gary Hsu <gary_hsu at aspeedtech.com>; Ryan Chen <ryan_chen at aspeedtech.com>
> Cc: openbmc at lists.ozlabs.org
> Subject: Re: [HELP] ipmi-kcs didn't work
>
>
>
> On 12/3/18, 7:54 AM, "Jae Hyun Yoo" <jae.hyun.yoo at linux.intel.com> wrote:
>
> On 12/1/2018 8:29 AM, Samuel Jiang wrote:
> > Apologize for sending out no content mail first.
> >
> > Jae,
> > The aspeed_gates in clk-aspeed.c perhaps as todo suggest asking Aspeed
> > the actual parent data for check initializing?
> >
>
> Yes, that makes sense.
>
> Hi Gary and Ryan,
>
> Can you please tell us what is the actual parent clock source of LPC IP?
> I mean the operational clock of LPC IP hardware block, not the interface
> clock.
>
> Thanks,
> Jae
>
> > Vijay,
> > I traced lpc-ctrl module, it seems direct update the same
> > ASPEED_CLK_GATE_LCLK register map bit to enable. If parent data is
> > disabled, it could enable in dts.
> > The device tree detail, I reference it from aspeed-g5.dtsi. Hope it
> > could help you for work.
> >
> > Thanks,
> >
> > Samuel Jiang
>
> Samual/Jay,
> In my case if I don't initialize LPC clock in driver, Bios on host side wait and doesn't boot.
> I don't understand here what is holding Bios here but by initializing this LPC clock let bios boot.
>
> Regards
> -Vijay
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/openbmc/attachments/20181205/3ec9f8cd/attachment.html>