[PATCH v2 1/2] dt-binding: i2c: npcm7xx: add binding for i2c controller

[Rob Herring]

On Tue, Aug 07, 2018 at 02:07:08PM +0300, Tali Perry wrote:
> Nuvoton NPCM7XX I2C Controller
> NPCM7xx includes 16 I2C contollers. THis driver operates the controller.
> This module also includes a slave mode, which will be submitted later on.
> 
> Any feedback would be appreciated.  
> 
> v2 -> v1:
> 	- run check patch in strict mode.
> 	- use linux crc.
> 	- define regs in constant offset without base.
> 	- remove debug prints.
> 	- no declerations for local functions.
> 	
> v1: initial version
> 
> Signed-off-by: Tali Perry <tali.perry1 at gmail.com>
> 
> ---
>  .../devicetree/bindings/i2c/i2c-npcm7xx.txt        | 27 ++++++++++++++++++++++
>  MAINTAINERS                                        |  8 +++++++
>  2 files changed, 35 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/i2c/i2c-npcm7xx.txt
> 
> diff --git a/Documentation/devicetree/bindings/i2c/i2c-npcm7xx.txt b/Documentation/devicetree/bindings/i2c/i2c-npcm7xx.txt
> new file mode 100644
> index 000000000000..e2ee45d7a41e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i2c/i2c-npcm7xx.txt
> @@ -0,0 +1,27 @@
> +Nuvoton NPCM7XX I2C bus
> +
> +The NPCM750x includes sixteen I2C busses
> +
> +Required properties:
> +- compatible      : must be "nuvoton,npcm750-i2c-bus"

Is 'bus' how the datasheet calls it? If not, I'd drop the '-bus' part as 
it is really a controller.

> +- reg             : Offset and length of the register set for the device.
> +- interrupts      : Contain the I2C interrupt with flags for falling edge.
> +- clocks          : phandle of I2C reference clock.
> +
> +Optional:
> +- bus-frequency   : Contain the I2C bus frequency,
> +			the default I2C bus frequency is 100000.
> +- pinctrl-0       : must be <&smbX_pins>, X is module number
> +			(on NPCM7XX it's 0 to 15)
> +- pinctrl-names   : should be set to "default"
> +Example:
> +
> +	i2c0: i2c-bus at 80000 {

Should be 'i2c at 80000'

> +		compatible = "nuvoton,npcm750-i2c-bus";
> +		reg = <0x80000 0x1000>;
> +		clocks = <&clk NPCM7XX_CLK_APB2>;
> +		bus-frequency = <100000>;
> +		interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&smb0_pins>;
> +	};
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 192d7f73fd01..13bac916d21d 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -1244,6 +1244,14 @@ F:	drivers/i2c/busses/i2c-aspeed.c
>  F:	Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-i2c-ic.txt
>  F:	Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
>  
> +ARM/NUVOTON I2C DRIVER
> +M:	Tali Perry <tali.perry1 at gmail.com>
> +L:	linux-i2c at vger.kernel.org
> +L:	openbmc at lists.ozlabs.org (moderated for non-subscribers)
> +S:	Maintained
> +F:	drivers/i2c/busses/i2c-npcm7xx.c
> +F:	Documentation/devicetree/bindings/i2c/i2c-npcm7xx.txt
> +
>  ARM/ASPEED MACHINE SUPPORT
>  M:	Joel Stanley <joel at jms.id.au>
>  R:	Andrew Jeffery <andrew at aj.id.au>
> -- 
> 2.14.1
>