[PATCH linux dev-4.13 3/5] ARM: dts: aspeed-g5: Add resets and clocks to GFX node

[Andrew Jeffery]

On Thu, 19 Apr 2018, at 13:50, Joel Stanley wrote:
> The ast2500 has a reset for the CRT device that must be deasserted
> before it can be used. Similarly it has a clock gate for a clock called
> D1CLK that must be set to running.
> 
> Signed-off-by: Joel Stanley <joel at jms.id.au>
> ---
>  arch/arm/boot/dts/aspeed-g5.dtsi | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
> index 25a88dd44d91..4ca4bc463347 100644
> --- a/arch/arm/boot/dts/aspeed-g5.dtsi
> +++ b/arch/arm/boot/dts/aspeed-g5.dtsi
> @@ -175,6 +175,10 @@
>  				compatible = "aspeed,ast2500-gfx", "syscon";
>  				reg = <0x1e6e6000 0x1000>;
>  				reg-io-width = <4>;
> +				clocks = <&syscon ASPEED_CLK_GATE_D1CLK>;
> +				resets = <&syscon ASPEED_RESET_CRT1>;
> +				status = "disabled";
> +				interrupts = <0x19>;

Bit of a nit, but it would be easier to reference the documentation if the interrupt was base 10...

Reviewed-by: Andrew Jeffery <andrew at aj.id.au>

>  			};
>  
>  			adc: adc at 1e6e9000 {
> -- 
> 2.17.0
>