[PATCH linux dev-4.13 4/5] ARM: dts: ast2500-evb: Enable the GFX IP

[Joel Stanley]

The GFX controller is the internal graphics device used by the SoC
(opposed to the one connected via the PCIe device and used by the host).

This configures it with a framebuffer region and adds it to the command
line so kernel boot messages appear on the display.

Signed-off-by: Joel Stanley <joel at jms.id.au>
---
 arch/arm/boot/dts/aspeed-ast2500-evb.dts | 21 ++++++++++++++++++++-
 1 file changed, 20 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed-ast2500-evb.dts
index 45efac8f8806..c0a7f51e7eb6 100644
--- a/arch/arm/boot/dts/aspeed-ast2500-evb.dts
+++ b/arch/arm/boot/dts/aspeed-ast2500-evb.dts
@@ -13,12 +13,26 @@
 
 	chosen {
 		stdout-path = &uart5;
-		bootargs = "console=ttyS4,115200 earlyprintk";
+		bootargs = "console=tty0 console=ttyS4,115200 earlyprintk";
 	};
 
 	memory at 80000000 {
+		device_type = "memory";
 		reg = <0x80000000 0x20000000>;
 	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
 };
 
 &fmc {
@@ -80,3 +94,8 @@
 		reg = <0x4d>;
 	};
 };
+
+&gfx {
+     status = "okay";
+     memory-region = <&gfx_memory>;
+};
-- 
2.17.0