OpenBMC on Raspberry PI 3.

[Javier Romero]

Rick / Andrew,

Thank you very much for your answer and suggestions.

I'm looking at that repository on Github now.

Regards,




*Javier Romero*

*E-mail: xavinux at gmail.com <xavinux at gmail.com>*

*Skype: xavinux*


2017-10-06 18:28 GMT-03:00 Andrew Jeffery <andrew at aj.id.au>:

>
>
> On Sat, 7 Oct 2017, at 03:29, Rick Altherr wrote:
> > When you run  export TEMPLATECONF=meta-openbmc-machines/meta-
> > openpower/meta-ibm/meta-palmetto/conf, you are telling the build system
> > that you want to build images for the BMC processor used on the Palmetto
> > machine (Aspeed AST2400).  That image won't boot on a RaspberryPi.  What
> > you'll need to do is create a new layer in meta-openbmc-machines for a
> > RaspberryPi that includes the raspberrypi layer, specifies the correct
> > kernel device tree, etc.
>
>  As a heads-up, some of this work has already been done:
>
> https://github.com/openbmc/openbmc/tree/master/meta-
> openbmc-machines/meta-evb/meta-evb-raspberrypi/conf
>
> It was added in this change:
>
> https://gerrit.openbmc-project.xyz/#/c/508/
>
> I don't think it was thoroughly tested and it has probably bit-rotted,
> but maybe it's existence will flatten out the learning curve a bit.
>
> Cheers,
>
> Andrew
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/openbmc/attachments/20171006/c057615d/attachment-0001.html>