OpenBMC on Raspberry PI 3.

[Javier Romero]

Hi People,

I'm building an OpenBMC image for target Palmetto on Ubuntu 16.04 to try to
make it work on the Raspberry PI 3. I've followed these steps:


*1.  *sudo apt-get install -y git build-essential libsdl1.2-dev texinfo
gawk chrpath diffstat

*2.* git clone git at github.com:openbmc/openbmc.git

*3.* cd openbmc

*4-* export TEMPLATECONF=meta-openbmc-machines/meta-
openpower/meta-ibm/meta-palmetto/conf

*tester at obmc:/openbmc$* . oe-init-build-env ~/my-build

*tester at obmc:~/my-build$* bitbake obmc-phosphor-image

*tester at obmc:/$* cd /home/tester/my-build/tmp/deploy/images/palmetto/

*tester at obmc:/$* tar -xvf
obmc-phosphor-image-palmetto-20171005142206.static.mtd.all.tar

*tester at obmc:/$* ls -lha
total 65M
drwxr-xr-x  2 root   root   4.0K Oct  5 15:37 .
drwxr-xr-x 24 root   root   4.0K Oct  5 10:29 ..
*-rw-rw-r--  1 tester tester  32M Oct  5 14:03 image-bmc*
-rw-rw-r--  2 tester tester  33M Oct  5 14:03
obmc-phosphor-image-palmetto-20171005142206.static.mtd.all.tar


Would like to know if it is the *image-bmc* file, what I will have to flash
on the SD card of the Raspberry to load OpenBMC.

Have also build an image of Linux Yocto for Raspberry PI 3.

Thanks for your attention.

Regards,




*Javier Romero*

*E-mail: xavinux at gmail.com <xavinux at gmail.com>*

*Skype: xavinux*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/openbmc/attachments/20171006/8a0fc680/attachment.html>