[PATCH linux dev-4.10 v3] ARM: dts: aspeed: quanta: Enable pwm fans

Patrick Venture venture at google.com
Thu Jun 29 23:40:35 AEST 2017


On Thu, Jun 29, 2017 at 5:30 AM, Mykola Kostenok <c_mykolak at mellanox.com> wrote:
> Hi!
>
>
> We want to add pwm_tacho for msn platform too.
>
> Is there some special reason why you add pwm_tacho:
> pwm-tacho-controller at 1e786000  to .dts not .dtsi file?
>
>
> What about add this:
>
>        pwm_tacho: pwm-tacho-controller at 1e786000 {
>                #address-cells = <1>;
>                #size-cells = <1>;
>               reg = <0x1e786000 0x1000>;
>                compatible = "aspeed,ast2500-pwm-tacho";
>                clocks = <&pwm_tacho_fixed_clk>;
>                pinctrl-names = "default";
>
>
> to aspeed-g5.dtsi?
>

I believe that's completely do-able.  I submitted patches for the way
we had it configured here.  Defining the fans in a big group with the
pwm specific to the platform.  But you're right, I do believe the
primary details are the same across all aspeed-g4/g5 for the
pwm-tacho-controller.

>
> And specific like pinctrl and fan:
>
>                pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
>                        &pinctrl_pwm2_default &pinctrl_pwm3_default>;
>
>                fan at 0 {
>                        reg = <0x00>;
>                        aspeed,fan-tach-ch = /bits/ 8 <0x00>;
>                };
>
>
>  to .dts file.
>
>
> Thanks.
>
> Best regards, Mykola Kostenok.
>
> ________________________________
> От: openbmc <openbmc-bounces+c_mykolak=mellanox.com at lists.ozlabs.org> от
> имени Patrick Venture <venture at google.com>
> Отправлено: 28 июня 2017 г. 17:23:04
> Кому: venture at google.com; joel at jms.id.au; openbmc at lists.ozlabs.org
> Тема: [PATCH linux dev-4.10 v3] ARM: dts: aspeed: quanta: Enable pwm fans
>
> Signed-off-by: Patrick Venture <venture at google.com>
> ---
> v3: lowercased hex address
> v2: Moved pwm_tacho_fixed_clk to clocks.
> ---
>  arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts | 51
> ++++++++++++++++++++++++++++
>  arch/arm/boot/dts/aspeed-g4.dtsi             |  5 +++
>  2 files changed, 56 insertions(+)
>
> diff --git a/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts
> b/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts
> index e609c53d58f5..3abc2954d26e 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts
> @@ -46,6 +46,57 @@
>                          gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_LOW>;
>                  };
>          };
> +
> +       pwm_tacho: pwm-tacho-controller at 1e786000 {
> +               #address-cells = <1>;
> +               #size-cells = <1>;
> +               reg = <0x1e786000 0x1000>;
> +               compatible = "aspeed,ast2500-pwm-tacho";
> +               clocks = <&pwm_tacho_fixed_clk>;
> +               pinctrl-names = "default";
> +               pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
> +                       &pinctrl_pwm2_default &pinctrl_pwm3_default>;
> +
> +               fan at 0 {
> +                       reg = <0x00>;
> +                       aspeed,fan-tach-ch = /bits/ 8 <0x00>;
> +               };
> +
> +               fan at 1 {
> +                       reg = <0x01>;
> +                       aspeed,fan-tach-ch = /bits/ 8 <0x01>;
> +               };
> +
> +               fan at 2 {
> +                       reg = <0x02>;
> +                       aspeed,fan-tach-ch = /bits/ 8 <0x02>;
> +               };
> +
> +               fan at 3 {
> +                       reg = <0x03>;
> +                       aspeed,fan-tach-ch = /bits/ 8 <0x03>;
> +               };
> +
> +               fan at 4 {
> +                       reg = <0x00>;
> +                       aspeed,fan-tach-ch = /bits/ 8 <0x04>;
> +               };
> +
> +               fan at 5 {
> +                       reg = <0x01>;
> +                       aspeed,fan-tach-ch = /bits/ 8 <0x05>;
> +               };
> +
> +               fan at 6 {
> +                       reg = <0x02>;
> +                       aspeed,fan-tach-ch = /bits/ 8 <0x06>;
> +               };
> +
> +               fan at 7 {
> +                       reg = <0x03>;
> +                       aspeed,fan-tach-ch = /bits/ 8 <0x07>;
> +               };
> +       };
>  };
>
>  &fmc {
> diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi
> b/arch/arm/boot/dts/aspeed-g4.dtsi
> index a998a00a2728..9cc959fccfa0 100644
> --- a/arch/arm/boot/dts/aspeed-g4.dtsi
> +++ b/arch/arm/boot/dts/aspeed-g4.dtsi
> @@ -36,6 +36,11 @@
>          };
>
>          clocks {
> +               pwm_tacho_fixed_clk: fixedclk {
> +                       compatible = "fixed-clock";
> +                       #clock-cells = <0>;
> +                       clock-frequency = <24000000>;
> +               };
>          };
>
>          ahb {
> --
> 2.13.1.611.g7e3b11ae1-goog
>


More information about the openbmc mailing list