[PATCH linux dev-4.10] ARM: dts: aspeed: quanta: Enable pwm fans

[Joel Stanley]

On Fri, Jun 23, 2017 at 10:54 AM, Patrick Venture <venture at google.com> wrote:
> Signed-off-by: Patrick Venture <venture at google.com>
> ---
>  arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts | 51 ++++++++++++++++++++++++++++
>  arch/arm/boot/dts/aspeed-g4.dtsi             |  6 ++++
>  2 files changed, 57 insertions(+)
>
> diff --git a/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts b/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts
> index e609c53d58f5..3abc2954d26e 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts
> @@ -46,6 +46,57 @@
>                         gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_LOW>;
>                 };
>         };
> +
> +       pwm_tacho: pwm-tacho-controller at 1e786000 {
> +               #address-cells = <1>;
> +               #size-cells = <1>;
> +               reg = <0x1E786000 0x1000>;
> +               compatible = "aspeed,ast2500-pwm-tacho";
> +               clocks = <&pwm_tacho_fixed_clk>;
> +               pinctrl-names = "default";
> +               pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
> +                       &pinctrl_pwm2_default &pinctrl_pwm3_default>;
> +
> +               fan at 0 {
> +                       reg = <0x00>;
> +                       aspeed,fan-tach-ch = /bits/ 8 <0x00>;
> +               };
> +
> +               fan at 1 {
> +                       reg = <0x01>;
> +                       aspeed,fan-tach-ch = /bits/ 8 <0x01>;
> +               };
> +
> +               fan at 2 {
> +                       reg = <0x02>;
> +                       aspeed,fan-tach-ch = /bits/ 8 <0x02>;
> +               };
> +
> +               fan at 3 {
> +                       reg = <0x03>;
> +                       aspeed,fan-tach-ch = /bits/ 8 <0x03>;
> +               };
> +
> +               fan at 4 {
> +                       reg = <0x00>;
> +                       aspeed,fan-tach-ch = /bits/ 8 <0x04>;
> +               };
> +
> +               fan at 5 {
> +                       reg = <0x01>;
> +                       aspeed,fan-tach-ch = /bits/ 8 <0x05>;
> +               };
> +
> +               fan at 6 {
> +                       reg = <0x02>;
> +                       aspeed,fan-tach-ch = /bits/ 8 <0x06>;
> +               };
> +
> +               fan at 7 {
> +                       reg = <0x03>;
> +                       aspeed,fan-tach-ch = /bits/ 8 <0x07>;
> +               };
> +       };
>  };
>
>  &fmc {
> diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
> index a998a00a2728..c93b0460cada 100644
> --- a/arch/arm/boot/dts/aspeed-g4.dtsi
> +++ b/arch/arm/boot/dts/aspeed-g4.dtsi
> @@ -184,6 +184,12 @@
>                                         reg = <0x2c>;
>                                 };
>
> +                               pwm_tacho_fixed_clk: fixedclk {
> +                                       compatible = "fixed-clock";
> +                                       #clock-cells = <0>;
> +                                       clock-frequency = <24000000>;
> +                               };

This is a bit strange. I don't think it should live at this spot in
the device tree.


> +
>                                 hwrng at 1e6e2078 {
>                                         compatible = "timeriomem_rng";
>                                         reg = <0x1e6e2078 0x4>;
> --
> 2.13.1.611.g7e3b11ae1-goog
>