[PATCH] arm: dts: aspeed: witherspoon: Add i2c and led devices
Joel Stanley
joel at jms.id.au
Tue Jan 17 11:20:59 AEDT 2017
On Tue, Jan 17, 2017 at 7:21 AM, Matt Spinler
<mspinler at linux.vnet.ibm.com> wrote:
> From: Matt Spinler <spinler at us.ibm.com>
>
> Add more I2C devices and the rear LEDs.
>
> Signed-off-by: Matt Spinler <spinler at us.ibm.com>
Thanks, merged into dev-4.7.
Cheers,
Joel
> ---
> arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts | 41 +++++++++++++++++++++---
> 1 file changed, 37 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
> index 9badf3e94599..da5ec5ee3746 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
> @@ -1,7 +1,7 @@
> /dts-v1/;
>
> #include "aspeed-g5.dtsi"
> -#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/gpio/aspeed-gpio.h>
>
> / {
> model = "Witherspoon BMC";
> @@ -19,6 +19,22 @@
> memory {
> reg = <0x80000000 0x40000000>;
> };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + rear-fault {
> + gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>;
> + };
> +
> + rear-id {
> + gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_LOW>;
> + };
> +
> + rear-power {
> + gpios = <&gpio ASPEED_GPIO(N, 3) GPIO_ACTIVE_LOW>;
> + };
> + };
> };
>
> &fmc {
> @@ -115,25 +131,38 @@
> compatible = "bosch,bmp180";
> reg = <0x77>;
> };
> +
> + max31785 at 52 {
> + compatible = "maxim,max31785";
> + reg = <0x52>;
> + };
> };
>
> &i2c4 {
> status = "okay";
>
> - /* CP1 TMP423A */
> /* CP1 VDN & VDDR */
> /* CP1 VDD & VCS */
> /* CP1 VIO */
> +
> + tmp423a at 4c {
> + compatible = "ti,tmp423";
> + reg = <0x4c>;
> + };
> };
>
>
> &i2c5 {
> status = "okay";
>
> - /* CP1 TMP423A */
> /* CP1 VDN & VDDR */
> /* CP1 VDD & VCS */
> /* CP1 VIO */
> +
> + tmp423a at 4c {
> + compatible = "ti,tmp423";
> + reg = <0x4c>;
> + };
> };
>
> &i2c6 {
> @@ -152,13 +181,17 @@
> &i2c9 {
> status = "okay";
>
> - /* Tmp275 */
>
> /* MUX
> * -> PCIe Slot 3
> * -> PCIe Slot 4
> * -> PCA9517 -> PEX8725
> */
> +
> + tmp275 at 4a {
> + compatible = "ti,tmp275";
> + reg = <0x4a>;
> + };
> };
>
> &i2c10 {
> --
> 2.11.0
>
> _______________________________________________
> openbmc mailing list
> openbmc at lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/openbmc
More information about the openbmc
mailing list