[PATCH linux dev-4.7 2/3] ARM: dts: aspeed: romulus: Add fsi-master GPIO bindings

[Eddie James]

Looks good.

Acked-by: Eddie James <eajames at linux.vnet.ibm.com>


On 02/14/2017 01:30 AM, Lei YU wrote:
> Define the pins used on Romulus by the FSI GPIO master.
>
> Signed-off-by: Lei YU <mine260309 at gmail.com>
> ---
>   arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts | 13 ++++++++++++-
>   1 file changed, 12 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
> index f47eb63..bc13ad9 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
> @@ -1,7 +1,7 @@
>   /dts-v1/;
>
>   #include "aspeed-g5.dtsi"
> -#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/gpio/aspeed-gpio.h>
>
>   / {
>   	model = "Romulus BMC";
> @@ -31,6 +31,17 @@
>   		};
>   	};
>
> +	fsi-master {
> +		compatible = "ibm,fsi-master", "ibm,fsi-master-gpio";
> +
> +		status = "disabled";
> +
> +		clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
> +		data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>;
> +		mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
> +		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
> +		trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
> +	};
>   };
>
>   &fmc {