[PATCH linux dev-4.7 2/3] ARM: dts: aspeed: romulus: Add fsi-master GPIO bindings

[Joel Stanley]

On Tue, Feb 14, 2017 at 6:00 PM, Lei YU <mine260309 at gmail.com> wrote:
> Define the pins used on Romulus by the FSI GPIO master.

I compared these pins to pdbg and they look good.

> Signed-off-by: Lei YU <mine260309 at gmail.com>

Reviewed-by: Joel Stanley <joel at jms.id.au>

> ---
>  arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts | 13 ++++++++++++-
>  1 file changed, 12 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
> index f47eb63..bc13ad9 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
> @@ -1,7 +1,7 @@
>  /dts-v1/;
>
>  #include "aspeed-g5.dtsi"
> -#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/gpio/aspeed-gpio.h>
>
>  / {
>         model = "Romulus BMC";
> @@ -31,6 +31,17 @@
>                 };
>         };
>
> +       fsi-master {
> +               compatible = "ibm,fsi-master", "ibm,fsi-master-gpio";
> +
> +               status = "disabled";
> +
> +               clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
> +               data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>;
> +               mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
> +               enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
> +               trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
> +       };
>  };
>
>  &fmc {
> --
> 1.9.1
>