[PATCH linux v2] dts: Minimal device tree for Quanta Q71L BMC
Rick Altherr
raltherr at google.com
Wed Feb 1 12:36:34 AEDT 2017
Supports:
- BMC console UART
- BMC boot flash
- host boot flash
- host virtual UART (host console)
--
Changes in v2:
- Reserve correct VGA framebuffer location in RAM
- Remove pinctl settings for FLBUSY and FLWP as Q71L uses those pins as
GPIOs
- Enable I2C masters used by Q71L
Signed-off-by: Rick Altherr <raltherr at google.com>
---
arch/arm/boot/dts/aspeed-bmc-opp-quanta-q71l.dts | 120 +++++++++++++++++++++++
1 file changed, 120 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed-bmc-opp-quanta-q71l.dts
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-quanta-q71l.dts b/arch/arm/boot/dts/aspeed-bmc-opp-quanta-q71l.dts
new file mode 100644
index 000000000000..229764c091dd
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-quanta-q71l.dts
@@ -0,0 +1,120 @@
+/dts-v1/;
+
+#include "aspeed-g4.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+ model = "Quanta Q71L BMC";
+ compatible = "quanta,q71l-bmc", "aspeed,ast2400";
+
+ aliases {
+ serial4 = &uart5;
+ };
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=ttyS4,115200 earlyprintk";
+ };
+
+ memory {
+ reg = <0x40000000 0x8000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ vga_memory: framebuffer at 47800000 {
+ no-map;
+ reg = <0x47800000 0x00800000>; /* 8MB */
+ };
+ };
+
+ ahb {
+ bmc_pnor: fmc at 1e620000 {
+ reg = < 0x1e620000 0x94
+ 0x20000000 0x02000000 >;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "aspeed,ast2400-fmc";
+ aspeed,fmc-has-dma;
+ interrupts = <19>;
+ flash at 0 {
+ reg = < 0 >;
+ compatible = "jedec,spi-nor" ;
+#include "aspeed-bmc-opp-flash-layout.dtsi"
+ };
+ };
+
+ host_pnor: spi at 1e630000 {
+ reg = < 0x1e630000 0x18
+ 0x30000000 0x01000000 >;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "aspeed,ast2400-smc";
+ flash {
+ reg = < 0 >;
+ compatible = "jedec,spi-nor" ;
+ label = "pnor";
+ };
+ };
+ };
+};
+
+&pinctrl {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_vgahs_default &pinctrl_vgavs_default
+ &pinctrl_ddcclk_default &pinctrl_ddcdat_default>;
+};
+
+&mac0 {
+ status = "okay";
+
+ use-ncsi;
+ no-hw-checksum;
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+};
+
+&i2c7 {
+ status = "okay";
+};
+
+&i2c8 {
+ status = "okay";
+};
+
+&vuart {
+ status = "okay";
+};
--
2.11.0.483.g087da7b7c-goog
More information about the openbmc
mailing list