[PATCH u-boot v2 5/6] aspeed: Add function to configure pins for I2C devices

Maxim Sloyko maxims at google.com
Thu Nov 24 11:28:11 AEDT 2016


In the absence of pinmux driver, I2C driver will be
configuring pins directly.

Signed-off-by: Maxim Sloyko <maxims at google.com>
---
 arch/arm/include/asm/arch-aspeed/ast_scu.h |  6 ++++++
 arch/arm/mach-aspeed/ast-scu.c             | 28 ++++++++++++++++++++++++++++
 2 files changed, 34 insertions(+)

diff --git a/arch/arm/include/asm/arch-aspeed/ast_scu.h b/arch/arm/include/asm/arch-aspeed/ast_scu.h
index 6f00e37..5ab28cc 100644
--- a/arch/arm/include/asm/arch-aspeed/ast_scu.h
+++ b/arch/arm/include/asm/arch-aspeed/ast_scu.h
@@ -49,4 +49,10 @@ extern void ast_scu_init_eth(u8 num);
 extern void ast_scu_multi_func_eth(u8 num);
 extern void ast_scu_multi_func_romcs(u8 num);
 
+/*
+ * Enable I2C controller and pins for a particular device.
+ * Device numbering starts at 1
+ */
+extern void ast_scu_enable_i2c(u8 num);
+
 #endif
diff --git a/arch/arm/mach-aspeed/ast-scu.c b/arch/arm/mach-aspeed/ast-scu.c
index 87236e2..8232d88 100644
--- a/arch/arm/mach-aspeed/ast-scu.c
+++ b/arch/arm/mach-aspeed/ast-scu.c
@@ -509,3 +509,31 @@ void ast_scu_get_who_init_dram(void)
 		break;
 	}
 }
+
+void ast_scu_enable_i2c(u8 bus_num)
+{
+	if (bus_num > SCU_I2C_MAX_BUS_NUM) {
+		debug("%s: bus_num is out of range, must be [%d - %d]\n",
+		      __func__, SCU_I2C_MIN_BUS_NUM, SCU_I2C_MAX_BUS_NUM);
+		return;
+	}
+
+	if (bus_num == 0) {
+		/* Enable I2C Controllers */
+		clrbits_le32(AST_SCU_BASE + AST_SCU_RESET, SCU_RESET_I2C);
+	} else if (bus_num >= 3) {
+		setbits_le32(AST_SCU_BASE + AST_SCU_FUN_PIN_CTRL5,
+			     SCU_FUN_PIN_I2C(bus_num));
+	/* In earlier versions of the SoC these pins are always assigned to
+	 * respective I2C buses and require no configuration.
+	 */
+#ifdef AST_SOC_G5
+	} else if (bus_num == 1) {
+		setbits_le32(AST_SCU_BASE + AST_SCU_FUN_PIN_CTRL8,
+			     SCU_FUN_PIN_SDA1 | SCU_FUN_PIN_SCL1);
+	} else if (bus_num == 2) {
+		setbits_le32(AST_SCU_BASE + AST_SCU_FUN_PIN_CTRL8,
+			     SCU_FUN_PIN_SDA2 | SCU_FUN_PIN_SCL2);
+#endif
+	}
+}
-- 
2.8.0.rc3.226.g39d4020



More information about the openbmc mailing list