Query on image deployment on ASPEED board

Joel Stanley joel at jms.id.au
Thu Nov 17 15:39:27 AEDT 2016


Hello Arjun,

On Thu, Nov 17, 2016 at 2:56 PM, Arjun Padmanabhan
<arjun.padmanabhan at microsemi.com> wrote:
> We purchased ASPEED demo board(2400).
>
> We need to set up the openbmc environment on the board.
>
> Is there any document/steps where I can refer to for building and deploying
> the openbmc image on ASPEED board and boot it up with the image?

Is this an AST2400 EDK? I we have not used one of these before. You
should be able to netboot a Palmetto image though, and from there
contribute patches to enable your board.

To build an image, take a look at the cheetsheet:

https://github.com/openbmc/docs/blob/master/cheatsheet.md#building-for-palmetto

I recommend building on modern Ubuntu or Fedora machine.

Once you have an image built in openbmc/build/tmp/deploy/images, you
can netboot it with tftp. If you need help with that then we can help
you out. I recommend joining #openbmc on irc.freenode.net.

Cheers,

Joel


More information about the openbmc mailing list