Flashing U-Boot using DediProg(R) on Aspeed AST2500 EVB

[Joel Stanley]

Hi Shay,

On Wed, Jun 15, 2016 at 9:39 PM, Shay Slobodkin <shays at mellanox.com> wrote:
> Recently we had some problems with our AST2500 EVB U-Boot.
>
> Had several systems gone bad.
>
> We want to use the DediProg® tool in order to recover.
>
> If you have used this tool, could you please explain briefly how to use it
> with Aspeed AST2500 EVB?

I've not done this myself on the evb.

Looking at the board, you want header J70 is for the ast2500 boot
flash. It's a 5 pin connector on the south west area of the board. The
pins are labeled in the order: CS0, Clock, MOSI, MISO, Ground.

If you need further help perhaps send a photo of your programmer and
whatever cables it came with.

Cheers,

Joel