[PATCH] ppc64: Fix result code handling in prom_init
Benjamin Herrenschmidt
benh at kernel.crashing.org
Thu Jun 2 14:11:37 EST 2005
Hi !
prom_init(), the trampoline code that "talks" to Open Firmware during
early boot, has various issues with managing OF result codes. Some of my
recent fixups in fact made the problem worse on some platforms.
This patch reworks it all. Tested on g5, Maple, POWER3 and POWER5.
Signed-off-by: Benjamin Herrenschmidt <benh at kernel.crashing.org>
Index: linux-work/arch/ppc64/kernel/prom_init.c
===================================================================
--- linux-work.orig/arch/ppc64/kernel/prom_init.c 2005-06-02 08:11:37.000000000 +1000
+++ linux-work/arch/ppc64/kernel/prom_init.c 2005-06-02 14:03:54.000000000 +1000
@@ -211,13 +211,23 @@
*/
#define ADDR(x) (u32) ((unsigned long)(x) - offset)
+/*
+ * Error results ... some OF calls will return "-1" on error, some
+ * will return 0, some will return either. To simplify, here are
+ * macros to use with any ihandle or phandle return value to check if
+ * it is valid
+ */
+
+#define PROM_ERROR (-1u)
+#define PHANDLE_VALID(p) ((p) != 0 && (p) != PROM_ERROR)
+#define IHANDLE_VALID(i) ((i) != 0 && (i) != PROM_ERROR)
+
+
/* This is the one and *ONLY* place where we actually call open
* firmware from, since we need to make sure we're running in 32b
* mode when we do. We switch back to 64b mode upon return.
*/
-#define PROM_ERROR (-1)
-
static int __init call_prom(const char *service, int nargs, int nret, ...)
{
int i;
@@ -587,14 +597,13 @@
{
unsigned long offset = reloc_offset();
ihandle elfloader;
- int ret;
elfloader = call_prom("open", 1, 1, ADDR("/packages/elf-loader"));
if (elfloader == 0) {
prom_printf("couldn't open /packages/elf-loader\n");
return;
}
- ret = call_prom("call-method", 3, 1, ADDR("process-elf-header"),
+ call_prom("call-method", 3, 1, ADDR("process-elf-header"),
elfloader, ADDR(&fake_elf));
call_prom("close", 1, 0, elfloader);
}
@@ -646,7 +655,7 @@
base = _ALIGN_UP(base + 0x100000, align)) {
prom_debug(" trying: 0x%x\n\r", base);
addr = (unsigned long)prom_claim(base, size, 0);
- if ((int)addr != PROM_ERROR)
+ if (addr != PROM_ERROR)
break;
addr = 0;
if (align == 0)
@@ -708,7 +717,7 @@
for(; base > RELOC(alloc_bottom); base = _ALIGN_DOWN(base - 0x100000, align)) {
prom_debug(" trying: 0x%x\n\r", base);
addr = (unsigned long)prom_claim(base, size, 0);
- if ((int)addr != PROM_ERROR)
+ if (addr != PROM_ERROR)
break;
addr = 0;
}
@@ -902,18 +911,19 @@
{
unsigned long offset = reloc_offset();
struct prom_t *_prom = PTRRELOC(&prom);
- phandle prom_rtas, rtas_node;
+ phandle rtas_node;
+ ihandle rtas_inst;
u32 base, entry = 0;
u32 size = 0;
prom_debug("prom_instantiate_rtas: start...\n");
- prom_rtas = call_prom("finddevice", 1, 1, ADDR("/rtas"));
- prom_debug("prom_rtas: %x\n", prom_rtas);
- if (prom_rtas == (phandle) -1)
+ rtas_node = call_prom("finddevice", 1, 1, ADDR("/rtas"));
+ prom_debug("rtas_node: %x\n", rtas_node);
+ if (!PHANDLE_VALID(rtas_node))
return;
- prom_getprop(prom_rtas, "rtas-size", &size, sizeof(size));
+ prom_getprop(rtas_node, "rtas-size", &size, sizeof(size));
if (size == 0)
return;
@@ -922,14 +932,18 @@
prom_printf("RTAS allocation failed !\n");
return;
}
- prom_printf("instantiating rtas at 0x%x", base);
- rtas_node = call_prom("open", 1, 1, ADDR("/rtas"));
- prom_printf("...");
+ rtas_inst = call_prom("open", 1, 1, ADDR("/rtas"));
+ if (!IHANDLE_VALID(rtas_inst)) {
+ prom_printf("opening rtas package failed");
+ return;
+ }
+
+ prom_printf("instantiating rtas at 0x%x ...", base);
if (call_prom("call-method", 3, 2,
ADDR("instantiate-rtas"),
- rtas_node, base) != PROM_ERROR) {
+ rtas_inst, base) != PROM_ERROR) {
entry = (long)_prom->args.rets[1];
}
if (entry == 0) {
@@ -940,8 +954,8 @@
reserve_mem(base, size);
- prom_setprop(prom_rtas, "linux,rtas-base", &base, sizeof(base));
- prom_setprop(prom_rtas, "linux,rtas-entry", &entry, sizeof(entry));
+ prom_setprop(rtas_node, "linux,rtas-base", &base, sizeof(base));
+ prom_setprop(rtas_node, "linux,rtas-entry", &entry, sizeof(entry));
prom_debug("rtas base = 0x%x\n", base);
prom_debug("rtas entry = 0x%x\n", entry);
@@ -1062,7 +1076,7 @@
prom_printf("opening PHB %s", path);
phb_node = call_prom("open", 1, 1, path);
- if ( (long)phb_node <= 0)
+ if (phb_node == 0)
prom_printf("... failed\n");
else
prom_printf("... done\n");
@@ -1279,12 +1293,12 @@
/* get a handle for the stdout device */
_prom->chosen = call_prom("finddevice", 1, 1, ADDR("/chosen"));
- if ((long)_prom->chosen <= 0)
+ if (!PHANDLE_VALID(_prom->chosen))
prom_panic("cannot find chosen"); /* msg won't be printed :( */
/* get device tree root */
_prom->root = call_prom("finddevice", 1, 1, ADDR("/"));
- if ((long)_prom->root <= 0)
+ if (!PHANDLE_VALID(_prom->root))
prom_panic("cannot find device tree root"); /* msg won't be printed :( */
}
@@ -1356,9 +1370,8 @@
}
/* Default to pSeries. We need to know if we are running LPAR */
rtas = call_prom("finddevice", 1, 1, ADDR("/rtas"));
- if (rtas != (phandle) -1) {
- unsigned long x;
- x = prom_getproplen(rtas, "ibm,hypertas-functions");
+ if (!PHANDLE_VALID(rtas)) {
+ int x = prom_getproplen(rtas, "ibm,hypertas-functions");
if (x != PROM_ERROR) {
prom_printf("Hypertas detected, assuming LPAR !\n");
return PLATFORM_PSERIES_LPAR;
@@ -1426,12 +1439,13 @@
* leave some room at the end of the path for appending extra
* arguments
*/
- if (call_prom("package-to-path", 3, 1, node, path, PROM_SCRATCH_SIZE-10) < 0)
+ if (call_prom("package-to-path", 3, 1, node, path,
+ PROM_SCRATCH_SIZE-10) == PROM_ERROR)
continue;
prom_printf("found display : %s, opening ... ", path);
ih = call_prom("open", 1, 1, path);
- if (ih == (ihandle)0 || ih == (ihandle)-1) {
+ if (ih == 0) {
prom_printf("failed\n");
continue;
}
@@ -1514,6 +1528,12 @@
return 0;
}
+/*
+ * The Open Firmware 1275 specification states properties must be 31 bytes or
+ * less, however not all firmwares obey this. Make it 64 bytes to be safe.
+ */
+#define MAX_PROPERTY_NAME 64
+
static void __init scan_dt_build_strings(phandle node, unsigned long *mem_start,
unsigned long *mem_end)
{
@@ -1527,10 +1547,12 @@
/* get and store all property names */
prev_name = RELOC("");
for (;;) {
-
- /* 32 is max len of name including nul. */
- namep = make_room(mem_start, mem_end, 32, 1);
- if (call_prom("nextprop", 3, 1, node, prev_name, namep) <= 0) {
+ int rc;
+
+ /* 64 is max len of name including nul. */
+ namep = make_room(mem_start, mem_end, MAX_PROPERTY_NAME, 1);
+ rc = call_prom("nextprop", 3, 1, node, prev_name, namep);
+ if (rc != 1) {
/* No more nodes: unwind alloc */
*mem_start = (unsigned long)namep;
break;
@@ -1555,12 +1577,6 @@
}
}
-/*
- * The Open Firmware 1275 specification states properties must be 31 bytes or
- * less, however not all firmwares obey this. Make it 64 bytes to be safe.
- */
-#define MAX_PROPERTY_NAME 64
-
static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start,
unsigned long *mem_end)
{
@@ -1607,7 +1623,10 @@
prev_name = RELOC("");
sstart = (char *)RELOC(dt_string_start);
for (;;) {
- if (call_prom("nextprop", 3, 1, node, prev_name, pname) <= 0)
+ int rc;
+
+ rc = call_prom("nextprop", 3, 1, node, prev_name, pname);
+ if (rc != 1)
break;
/* find string offset */
@@ -1623,7 +1642,7 @@
l = call_prom("getproplen", 2, 1, node, pname);
/* sanity checks */
- if (l < 0)
+ if (l == PROM_ERROR)
continue;
if (l > MAX_PROPERTY_LENGTH) {
prom_printf("WARNING: ignoring large property ");
@@ -1771,17 +1790,18 @@
/* Some G5s have a missing interrupt definition, fix it up here */
u3 = call_prom("finddevice", 1, 1, ADDR("/u3 at 0,f8000000"));
- if ((long)u3 <= 0)
+ if (!PHANDLE_VALID(u3))
return;
i2c = call_prom("finddevice", 1, 1, ADDR("/u3 at 0,f8000000/i2c at f8001000"));
- if ((long)i2c <= 0)
+ if (!PHANDLE_VALID(i2c))
return;
mpic = call_prom("finddevice", 1, 1, ADDR("/u3 at 0,f8000000/mpic at f8040000"));
- if ((long)mpic <= 0)
+ if (!PHANDLE_VALID(mpic))
return;
/* check if proper rev of u3 */
- if (prom_getprop(u3, "device-rev", &u3_rev, sizeof(u3_rev)) <= 0)
+ if (prom_getprop(u3, "device-rev", &u3_rev, sizeof(u3_rev))
+ == PROM_ERROR)
return;
if (u3_rev != 0x35)
return;
More information about the Linuxppc64-dev
mailing list