Linux problem in mpc8260

[Scott Wood]

On Mon, Sep 22, 2008 at 05:37:24PM +0530, VenkataKrishna wrote:
>  In our target board have two banks of flash device. Which is connected two
> Chip select 0(CS0) and Chip select 1 (CS1). In Hardware our target board has
> specialty   jumper setting change CS0 VsCS1. Booting device always connected
> CS0. What is our problem is I want download my Linux uImage in one of flash
> device in my board when change jumper setting in hardware the board should
> be boot .Board  is Powerpc based processor (MPC8260). Any one suggest me
> what can I do. Where can I initialization memory device. 

You need to put a u-boot (or other firmware) image in each bank.

-Scott